From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Mon, 18 Mar 2013 16:26:24 +0800 Subject: [PATCH v2 3/4] ARM: dts: mxs: add enet_out clock to devicetree In-Reply-To: <1363595185-12302-1-git-send-email-shawn.guo@linaro.org> References: <1363595185-12302-1-git-send-email-shawn.guo@linaro.org> Message-ID: <1363595185-12302-4-git-send-email-shawn.guo@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Wolfram Sang Put the clock to the devicetree, so the driver can take care of it later. Then, we don't have to do the enabling as a workaround in board init. Signed-off-by: Wolfram Sang [shawn.guo: add enet_out into imx28.dtsi and overwrite it for m28evk] Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-m28evk.dts | 2 ++ arch/arm/boot/dts/imx28.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 6ce3d17..3d2e1a4 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -221,6 +221,8 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7ba4966..dc1203d 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -940,8 +940,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; + clocks = <&clks 57>, <&clks 57>, <&clks 64>; + clock-names = "ipg", "ahb", "enet_out"; status = "disabled"; }; -- 1.7.9.5