From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Mon, 18 Mar 2013 16:26:25 +0800 Subject: [PATCH v2 4/4] ARM: mxs: remove unneeded enet_out clk initialization In-Reply-To: <1363595185-12302-1-git-send-email-shawn.guo@linaro.org> References: <1363595185-12302-1-git-send-email-shawn.guo@linaro.org> Message-ID: <1363595185-12302-5-git-send-email-shawn.guo@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org With fec driver taking care of enet_out clk, most of board setup do not need to enable enet_out clk. So remove them. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mxs.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 0521867..026edfc 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -271,7 +271,6 @@ static inline void enable_clk_enet_out(void) static void __init imx28_evk_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_FSL); mxsfb_pdata.mode_list = mx28evk_video_modes; @@ -299,11 +298,6 @@ static void __init m28evk_init(void) mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } -static void __init sc_sps1_init(void) -{ - enable_clk_enet_out(); -} - static int apx4devkit_phy_fixup(struct phy_device *phy) { phy->dev_flags |= MICREL_PHY_50MHZ_CLK; @@ -400,13 +394,11 @@ static void __init tx28_post_init(void) static void __init cfa10049_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); } static void __init cfa10037_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); mxsfb_pdata.mode_list = cfa10049_video_modes; @@ -417,8 +409,6 @@ static void __init cfa10037_init(void) static void __init apf28_init(void) { - enable_clk_enet_out(); - mxsfb_pdata.mode_list = apf28dev_video_modes; mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); mxsfb_pdata.default_bpp = 16; @@ -441,8 +431,6 @@ static void __init mxs_machine_init(void) cfa10049_init(); else if (of_machine_is_compatible("armadeus,imx28-apf28")) apf28_init(); - else if (of_machine_is_compatible("schulercontrol,imx28-sps1")) - sc_sps1_init(); of_platform_populate(NULL, of_default_bus_match_table, mxs_auxdata_lookup, NULL); -- 1.7.9.5