From: prakash.pm@ti.com (Manjunathappa, Prakash)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/5] Add DT support for davinci_mmc driver
Date: Wed, 20 Mar 2013 17:14:07 +0530 [thread overview]
Message-ID: <1363779852-24083-1-git-send-email-prakash.pm@ti.com> (raw)
Patch set adds DT support for davinci_mmc driver and is
verified on da850-evm without card_detect/write_protect and
EDMA support. Also takecare to derive controller IP version from
platform_device_id table, remove version specification in pdata.
Applies on top of below patch series under community review:
"Enable SPI flash support on da850-evm DT kernel"
http://www.spinics.net/lists/arm-kernel/msg231546.html
This series is reviewed and tested by Sekhar Nori, with and
without DT on da850 EVM.
Since v5:
Add below patch to this series.
"mmc: davinci: allow driver to work without DMA resource"
Choose smaller device name, da830-mmc instead of davinci-mmc-da830
and dm6441-mmc instead of davinci-mmc-dm355.
Since v4:
Minor nit, check on return value for failure of max-frequency property
parsing.
Merged patch "ARM: davinci: mmc: derive version information from device name"
with patch 1/4.
Since v3:
Added support to derive IP version information from platform_device_id table.
Since v2:
Modified the default value for bus-width and skipping the property specifications
for highspeed card capabilties for now. Re-ordered patch 2 and 3.
Since v1:
Modified the DT parse function to take default values, updated DT binding
documentation accordingly.
Manjunathappa, Prakash (5):
mmc: davinci: allow driver to work without DMA resource
ARM: davinci: mmc: derive version information from device name
mmc: davinci_mmc: add DT support
ARM: davinci: da850: add mmc DT entries
ARM: davinci: da850: override mmc DT node device name
.../devicetree/bindings/mmc/davinci_mmc.txt | 25 ++++++
arch/arm/boot/dts/da850-evm.dts | 7 ++
arch/arm/boot/dts/da850.dtsi | 15 +++
arch/arm/mach-davinci/board-da830-evm.c | 1 -
arch/arm/mach-davinci/board-da850-evm.c | 2 -
arch/arm/mach-davinci/board-dm355-evm.c | 1 -
arch/arm/mach-davinci/board-dm365-evm.c | 1 -
arch/arm/mach-davinci/board-dm644x-evm.c | 1 -
arch/arm/mach-davinci/board-neuros-osd2.c | 1 -
arch/arm/mach-davinci/board-omapl138-hawk.c | 1 -
arch/arm/mach-davinci/board-tnetv107x-evm.c | 1 -
arch/arm/mach-davinci/da830.c | 2 +-
arch/arm/mach-davinci/da850.c | 4 +-
arch/arm/mach-davinci/da8xx-dt.c | 1 +
arch/arm/mach-davinci/devices-da8xx.c | 4 +-
arch/arm/mach-davinci/devices-tnetv107x.c | 4 +-
arch/arm/mach-davinci/devices.c | 6 +-
arch/arm/mach-davinci/dm355.c | 4 +-
arch/arm/mach-davinci/dm365.c | 4 +-
arch/arm/mach-davinci/dm644x.c | 2 +-
arch/arm/mach-davinci/tnetv107x.c | 4 +-
drivers/mmc/host/davinci_mmc.c | 92 ++++++++++++++++++--
include/linux/platform_data/mmc-davinci.h | 3 -
23 files changed, 151 insertions(+), 35 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/davinci_mmc.txt
--
1.7.4.1
next reply other threads:[~2013-03-20 11:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-20 11:44 Manjunathappa, Prakash [this message]
2013-03-20 11:44 ` [PATCH v6 1/5] mmc: davinci: allow driver to work without DMA resource Manjunathappa, Prakash
2013-03-20 11:44 ` [PATCH v6 2/5] ARM: davinci: mmc: derive version information from device name Manjunathappa, Prakash
2013-03-20 11:44 ` [PATCH v6 3/5] mmc: davinci_mmc: add DT support Manjunathappa, Prakash
2013-03-20 13:26 ` Arnd Bergmann
2013-03-27 9:55 ` Manjunathappa, Prakash
2013-03-27 10:43 ` Arnd Bergmann
2013-03-27 17:46 ` Manjunathappa, Prakash
2013-03-20 11:44 ` [PATCH v6 4/5] ARM: davinci: da850: add mmc DT entries Manjunathappa, Prakash
2013-03-20 11:44 ` [PATCH v6 5/5] ARM: davinci: da850: override mmc DT node device name Manjunathappa, Prakash
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363779852-24083-1-git-send-email-prakash.pm@ti.com \
--to=prakash.pm@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).