linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: prakash.pm@ti.com (Manjunathappa, Prakash)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 4/5] ARM: davinci: da850: add mmc DT entries
Date: Wed, 20 Mar 2013 17:14:11 +0530	[thread overview]
Message-ID: <1363779852-24083-5-git-send-email-prakash.pm@ti.com> (raw)
In-Reply-To: <1363779852-24083-1-git-send-email-prakash.pm@ti.com>

Add DT entry for MMC. Also add entry for pinmux information.
Tested:
1) Without GPIO card detection and EDMA support as DT support for
   GPIO and EDMA are yet come.
2) By creating/deleting files and mounting/unmounting the partition.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Cc: linux-mmc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: davinci-linux-open-source at linux.davincidsp.com
Cc: devicetree-discuss at lists.ozlabs.org
Cc: cjb at laptop.org
Cc: Sekhar Nori <nsekhar@ti.com>
---
 arch/arm/boot/dts/da850-evm.dts |    7 +++++++
 arch/arm/boot/dts/da850.dtsi    |   15 +++++++++++++++
 2 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index fe2bbe7..bc1f951 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -81,6 +81,13 @@
 				};
 			};
 		};
+		mmc0: mmc at 1c40000 {
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+		};
 	};
 	nand_cs3 at 62000000 {
 		status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 327fb06..ef22fa2 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -70,6 +70,15 @@
 					0x14 0x00111111 0x00ffffff
 				>;
 			};
+			mmc0_pins: pinmux_mmc_pins {
+				pinctrl-single,bits = <
+					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
+					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
+					 * MMCSD0_CMD    MMCSD0_CLK
+					 */
+					0x28 0x00222222  0x00ffffff
+				>;
+			};
 		};
 		serial0: serial at 1c42000 {
 			compatible = "ns16550a";
@@ -115,6 +124,12 @@
 			reg = <0x21000 0x1000>;
 			status = "disabled";
 		};
+		mmc0: mmc at 1c40000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x40000 0x1000>;
+			interrupts = <16>;
+			status = "disabled";
+		};
 		spi1: spi at 1f0e000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
1.7.4.1

  parent reply	other threads:[~2013-03-20 11:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-20 11:44 [PATCH v6 0/5] Add DT support for davinci_mmc driver Manjunathappa, Prakash
2013-03-20 11:44 ` [PATCH v6 1/5] mmc: davinci: allow driver to work without DMA resource Manjunathappa, Prakash
2013-03-20 11:44 ` [PATCH v6 2/5] ARM: davinci: mmc: derive version information from device name Manjunathappa, Prakash
2013-03-20 11:44 ` [PATCH v6 3/5] mmc: davinci_mmc: add DT support Manjunathappa, Prakash
2013-03-20 13:26   ` Arnd Bergmann
2013-03-27  9:55     ` Manjunathappa, Prakash
2013-03-27 10:43       ` Arnd Bergmann
2013-03-27 17:46         ` Manjunathappa, Prakash
2013-03-20 11:44 ` Manjunathappa, Prakash [this message]
2013-03-20 11:44 ` [PATCH v6 5/5] ARM: davinci: da850: override mmc DT node device name Manjunathappa, Prakash

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1363779852-24083-5-git-send-email-prakash.pm@ti.com \
    --to=prakash.pm@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).