From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 4/7] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
Date: Sat, 23 Mar 2013 18:13:50 +1300 [thread overview]
Message-ID: <1364015633-18580-5-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1364015633-18580-1-git-send-email-linux@prisktech.co.nz>
This patch adds pinctrl nodes to the VIA VT8500 and Wondermedia SoC dtsi
files to support the pinctrl driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500.dtsi | 8 ++++++++
arch/arm/boot/dts/wm8505.dtsi | 8 ++++++++
arch/arm/boot/dts/wm8650.dtsi | 8 ++++++++
arch/arm/boot/dts/wm8850.dtsi | 8 ++++++++
4 files changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index cf31ced..16388c2 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -32,6 +32,14 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "via,vt8500-pinctrl";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <2>;
+ wm,pinmux = <0x00000001 0x00000001>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e74a1c0..c5aa4c9 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -47,6 +47,14 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8505-pinctrl";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <2>;
+ wm,pinmux = <0x80000000 0x80000000>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index db3c0a1..99c45e5 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -41,6 +41,14 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8650-pinctrl";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <2>;
+ wm,pinmux = <0x80000000 0x80000000>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index e8cbfdc..60094cd 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -48,6 +48,14 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8850-pinctrl";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <2>;
+ wm,pinmux = <0x80000000 0x80000000>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
--
1.7.9.5
next prev parent reply other threads:[~2013-03-23 5:13 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-23 5:13 [PATCHv2 0/7] arm: vt8500: Add support for pinctrl/gpio module Tony Prisk
2013-03-23 5:13 ` [PATCHv2 1/7] of: Add support for reading a u32 from a multi-value property Tony Prisk
2013-04-15 10:12 ` Grant Likely
2013-03-23 5:13 ` [PATCHv2 2/7] arm: vt8500: Increase available GPIOs on arch-vt8500 Tony Prisk
2013-03-23 10:44 ` Russell King - ARM Linux
2013-03-23 18:04 ` Tony Prisk
2013-03-23 5:13 ` [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500 Tony Prisk
2013-03-25 17:05 ` Stephen Warren
2013-03-25 18:51 ` Tony Prisk
2013-03-26 20:28 ` Stephen Warren
2013-03-27 4:59 ` Tony Prisk
2013-03-27 16:47 ` Stephen Warren
2013-03-27 9:23 ` Tony Prisk
2013-03-27 15:53 ` Stephen Warren
2013-03-28 5:03 ` Tony Prisk
2013-03-23 5:13 ` Tony Prisk [this message]
2013-03-23 5:13 ` [PATCHv2 5/7] arm: vt8500: Remove gpio devicetree nodes Tony Prisk
2013-03-23 5:13 ` [PATCHv2 6/7] gpio: vt8500: Remove arch-vt8500 gpio driver Tony Prisk
2013-03-23 5:13 ` [PATCHv2 7/7] arm: vt8500: Remove pinmux configuration from mach-vt8500/vt8500.c Tony Prisk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364015633-18580-5-git-send-email-linux@prisktech.co.nz \
--to=linux@prisktech.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).