[PATCH] ARM: kirkwood: make use of DT mvsdio on guruplug board

[sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)]

Device tree based guruplug boards still use mvsdio platform_data and
kirkwood_sdio_init to enable sdio. DT support for sdio is already there,
so make use of it.

This also fixes mvsdio accidentially breaking nand by configuring mpp0
to gpio, while used also by nand (nand_io2 on mpp0).

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Soeren Moch <smoch@web.de>
---
Cc: Soeren Moch <smoch@web.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts |    4 ++++
 arch/arm/mach-kirkwood/board-guruplug.c             |    6 ------
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 9555a86..44fd97d 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -69,6 +69,10 @@
 			status = "okay";
 			nr-ports = <1>;
 		};
+
+		mvsdio at 90000 {
+			status = "okay";
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c
index 0a0df45..a857163 100644
--- a/arch/arm/mach-kirkwood/board-guruplug.c
+++ b/arch/arm/mach-kirkwood/board-guruplug.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data guruplug_ge00_data = {
@@ -24,10 +23,6 @@ static struct mv643xx_eth_platform_data guruplug_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
 };
 
-static struct mvsdio_platform_data guruplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
 void __init guruplug_dt_init(void)
 {
 	/*
@@ -35,5 +30,4 @@ void __init guruplug_dt_init(void)
 	 */
 	kirkwood_ge00_init(&guruplug_ge00_data);
 	kirkwood_ge01_init(&guruplug_ge01_data);
-	kirkwood_sdio_init(&guruplug_mvsdio_data);
 }
-- 
1.7.10.4