From mboxrd@z Thu Jan 1 00:00:00 1970 From: avinashphilip@ti.com (Philip Avinash) Date: Mon, 25 Mar 2013 12:34:52 +0530 Subject: [PATCH 1/2] pwm: pwm-tiecap: Update device-tree binding document In-Reply-To: <1364195093-1357-1-git-send-email-avinashphilip@ti.com> References: <1364195093-1357-1-git-send-email-avinashphilip@ti.com> Message-ID: <1364195093-1357-2-git-send-email-avinashphilip@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Update binding document of pwm-tiecap to reflect the usage of similar modules in da850 and am3xx SOCs. Signed-off-by: Philip Avinash Cc: Grant Likely Cc: Rob Herring Cc: Rob Landley --- .../devicetree/bindings/pwm/pwm-tiecap.txt | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt index 131e8c1..43c4e81 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt @@ -1,7 +1,9 @@ TI SOC ECAP based APWM controller Required properties: -- compatible: Must be "ti,am33xx-ecap" +- compatible: Must be "ti,-ecap". + for am33xx - compatible = "ti,am33xx-ecap"; + for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap"; - #pwm-cells: Should be 3. Number of cells being used to specify PWM property. First cell specifies the per-chip index of the PWM to use, the second cell is the period in nanoseconds and bit 0 in the third cell is used to @@ -15,9 +17,15 @@ Optional properties: Example: -ecap0: ecap at 0 { +ecap0: ecap at 0 { /* ECAP on am33xx */ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; ti,hwmods = "ecap0"; }; + +ecap0: ecap at 0 { /* ECAP on da850 */ + compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x306000 0x80>; +}; -- 1.7.9.5