From: avinashphilip@ti.com (Philip Avinash)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/3] ARM: davinci: clk framework support for enable/disable functionality
Date: Mon, 25 Mar 2013 15:07:48 +0530 [thread overview]
Message-ID: <1364204268-15010-1-git-send-email-avinashphilip@ti.com> (raw)
In-Reply-To: <1364197789-16783-1-git-send-email-avinashphilip@ti.com>
Davinci clock framework currently not supporting clock enable/disable
functionality on clock nodes. In Davinci platform, EHRPWM module requires
support for clock enable/disable for TBCLK support. Hence this patch
adds support for enabling/disabling clocks depends on the availability
of the functionality.
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
---
Changes since v2:
- start using "usecount" field in clk structure to
enable/disable clocks.
Changes since v1:
- Add support for clock enable/disable functionality.
arch/arm/mach-davinci/clock.c | 21 ++++++++++++++-------
arch/arm/mach-davinci/clock.h | 2 ++
2 files changed, 16 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index d458558..960c7a5 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -35,19 +35,26 @@ static void __clk_enable(struct clk *clk)
{
if (clk->parent)
__clk_enable(clk->parent);
- if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
- davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
- true, clk->flags);
+ if (clk->usecount++ == 0) {
+ if (clk->flags & CLK_PSC)
+ davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
+ true, clk->flags);
+ else if (clk->clk_enable)
+ clk->clk_enable(clk);
+ }
}
static void __clk_disable(struct clk *clk)
{
if (WARN_ON(clk->usecount == 0))
return;
- if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
- (clk->flags & CLK_PSC))
- davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
- false, clk->flags);
+ if (--clk->usecount == 0) {
+ if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC))
+ davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
+ false, clk->flags);
+ else if (clk->clk_disable)
+ clk->clk_disable(clk);
+ }
if (clk->parent)
__clk_disable(clk->parent);
}
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 8694b39..1e4e836 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -104,6 +104,8 @@ struct clk {
int (*set_rate) (struct clk *clk, unsigned long rate);
int (*round_rate) (struct clk *clk, unsigned long rate);
int (*reset) (struct clk *clk, bool reset);
+ void (*clk_enable) (struct clk *clk);
+ void (*clk_disable) (struct clk *clk);
};
/* Clock flags: SoC-specific flags start at BIT(16) */
--
1.7.9.5
next prev parent reply other threads:[~2013-03-25 9:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-25 7:49 [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI Philip Avinash
2013-03-25 7:49 ` [PATCH v3 2/3] arm: davinci: clock node support for ECAP & EHRPWM Philip Avinash
2013-04-02 8:16 ` Sekhar Nori
2013-03-25 7:49 ` [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node Philip Avinash
2013-04-02 8:33 ` Sekhar Nori
2013-04-08 9:09 ` Philip, Avinash
2013-04-08 13:09 ` Sekhar Nori
2013-04-09 8:42 ` Philip, Avinash
2013-04-09 11:35 ` Sekhar Nori
2013-04-10 5:30 ` Philip, Avinash
2013-04-10 5:55 ` Sekhar Nori
2013-04-10 6:07 ` Philip, Avinash
2013-03-25 8:14 ` [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI Sekhar Nori
2013-03-25 8:30 ` Philip, Avinash
2013-03-25 9:37 ` Philip Avinash [this message]
2013-04-01 11:35 ` [PATCH v3 1/3] ARM: davinci: clk framework support for enable/disable functionality Sekhar Nori
2013-04-03 3:58 ` Philip, Avinash
2013-04-02 8:35 ` [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI Sekhar Nori
2013-04-04 4:39 ` Philip, Avinash
2013-04-04 5:49 ` Sekhar Nori
2013-04-04 6:38 ` Philip, Avinash
2013-04-04 10:10 ` Philip, Avinash
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364204268-15010-1-git-send-email-avinashphilip@ti.com \
--to=avinashphilip@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).