From: hechtb@gmail.com (Bastian Hecht)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines
Date: Wed, 27 Mar 2013 14:54:03 +0100 [thread overview]
Message-ID: <1364392444-25181-1-git-send-email-hechtb+renesas@gmail.com> (raw)
On some hardware we don't have a 1-1 mapping from the external
interrupts coming from INTC to the GIC SPI pins. We can however
share lines to demux incoming IRQs on these SoCs.
This patch enables the intc_irqpin driver to detect requests for shared
interrupt lines and demuxes them properly by querying the INTC INTREQx0A
registers.
If you need multiple shared intc_irqpin device instances, be sure to mask
out all interrupts on the INTC that share the one line before you start
to register them. Else you run into IRQ floods that would be caused by
interrupts for which no handler has been set up yet when the first
intc_irqpin device is registered.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
---
v4: rebased on next
drivers/irqchip/irq-renesas-intc-irqpin.c | 90 ++++++++++++++++++++++++++---
1 file changed, 83 insertions(+), 7 deletions(-)
diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c
index 82bbe8f..a5a9413 100644
--- a/drivers/irqchip/irq-renesas-intc-irqpin.c
+++ b/drivers/irqchip/irq-renesas-intc-irqpin.c
@@ -76,6 +76,8 @@ struct intc_irqpin_priv {
struct platform_device *pdev;
struct irq_chip irq_chip;
struct irq_domain *irq_domain;
+ bool shared_irqs;
+ u8 shared_irq_mask;
};
static unsigned long intc_irqpin_read32(void __iomem *iomem)
@@ -195,6 +197,28 @@ static void intc_irqpin_irq_disable(struct irq_data *d)
intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq);
}
+static void intc_irqpin_shared_irq_enable(struct irq_data *d)
+{
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+
+ intc_irqpin_dbg(&p->irq[hw_irq], "shared enable");
+ intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_CLEAR, hw_irq);
+
+ p->shared_irq_mask &= ~BIT(hw_irq);
+}
+
+static void intc_irqpin_shared_irq_disable(struct irq_data *d)
+{
+ struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
+ int hw_irq = irqd_to_hwirq(d);
+
+ intc_irqpin_dbg(&p->irq[hw_irq], "shared disable");
+ intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq);
+
+ p->shared_irq_mask |= BIT(hw_irq);
+}
+
static void intc_irqpin_irq_enable_force(struct irq_data *d)
{
struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d);
@@ -267,6 +291,25 @@ static irqreturn_t intc_irqpin_irq_handler(int irq, void *dev_id)
return IRQ_NONE;
}
+static irqreturn_t intc_irqpin_shared_irq_handler(int irq, void *dev_id)
+{
+ struct intc_irqpin_priv *p = dev_id;
+ unsigned int reg_source = intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE);
+ irqreturn_t status = IRQ_NONE;
+ int k;
+
+ for (k = 0; k < 8; k++) {
+ if (reg_source & BIT(7 - k)) {
+ if (BIT(k) & p->shared_irq_mask)
+ continue;
+
+ status |= intc_irqpin_irq_handler(irq, &p->irq[k]);
+ }
+ }
+
+ return status;
+}
+
static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
@@ -298,6 +341,7 @@ static int intc_irqpin_probe(struct platform_device *pdev)
void (*enable_fn)(struct irq_data *d);
void (*disable_fn)(struct irq_data *d);
const char *name = dev_name(&pdev->dev);
+ int ref_irq;
int ret;
int k;
@@ -385,13 +429,29 @@ static int intc_irqpin_probe(struct platform_device *pdev)
p->config.control_parent = of_property_read_bool(pdev->dev.of_node,
"control-parent");
+ /* clear all pending interrupts */
+ intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, 0x0);
+
+ /* scan for shared interrupt lines */
+ ref_irq = p->irq[0].requested_irq;
+ p->shared_irqs = true;
+ for (k = 1; k < p->number_of_irqs; k++) {
+ if (ref_irq != p->irq[k].requested_irq) {
+ p->shared_irqs = false;
+ break;
+ }
+ }
+
/* use more severe masking method if requested */
if (p->config.control_parent) {
enable_fn = intc_irqpin_irq_enable_force;
disable_fn = intc_irqpin_irq_disable_force;
- } else {
+ } else if (!p->shared_irqs) {
enable_fn = intc_irqpin_irq_enable;
disable_fn = intc_irqpin_irq_disable;
+ } else {
+ enable_fn = intc_irqpin_shared_irq_enable;
+ disable_fn = intc_irqpin_shared_irq_disable;
}
irq_chip = &p->irq_chip;
@@ -413,18 +473,34 @@ static int intc_irqpin_probe(struct platform_device *pdev)
goto err0;
}
- /* request and set priority on interrupts one by one */
- for (k = 0; k < p->number_of_irqs; k++) {
- if (devm_request_irq(&pdev->dev, p->irq[k].requested_irq,
- intc_irqpin_irq_handler,
- 0, name, &p->irq[k])) {
+ if (p->shared_irqs) {
+ /* request one shared interrupt */
+ if (devm_request_irq(&pdev->dev, p->irq[0].requested_irq,
+ intc_irqpin_shared_irq_handler,
+ IRQF_SHARED, name, p)) {
dev_err(&pdev->dev, "failed to request low IRQ\n");
ret = -ENOENT;
goto err1;
}
- intc_irqpin_mask_unmask_prio(p, k, 0);
+ } else {
+ /* request interrupts one by one */
+ for (k = 0; k < p->number_of_irqs; k++) {
+ if (devm_request_irq(&pdev->dev,
+ p->irq[k].requested_irq,
+ intc_irqpin_irq_handler,
+ 0, name, &p->irq[k])) {
+ dev_err(&pdev->dev,
+ "failed to request low IRQ\n");
+ ret = -ENOENT;
+ goto err1;
+ }
+ }
}
+ /* unmask all interrupts on prio level */
+ for (k = 0; k < p->number_of_irqs; k++)
+ intc_irqpin_mask_unmask_prio(p, k, 0);
+
dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs);
/* warn in case of mismatch if irq base is specified */
--
1.7.9.5
next reply other threads:[~2013-03-27 13:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-27 13:54 Bastian Hecht [this message]
2013-03-27 13:54 ` [PATCH v4 2/2] ARM: shmobile: r8a7740: Migrate from INTC to GIC Bastian Hecht
2013-03-28 0:55 ` Simon Horman
2013-03-28 0:54 ` [PATCH v4 1/2] irqchip: intc-irqpin: Add support for shared interrupt lines Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364392444-25181-1-git-send-email-hechtb+renesas@gmail.com \
--to=hechtb@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).