From mboxrd@z Thu Jan 1 00:00:00 1970 From: florian@openwrt.org (Florian Fainelli) Date: Fri, 29 Mar 2013 19:14:38 +0100 Subject: [PATCH 3/4] ARM: orion5x: add gigabit ethernet device tree node In-Reply-To: <1364580879-4297-1-git-send-email-florian@openwrt.org> References: <1364580879-4297-1-git-send-email-florian@openwrt.org> Message-ID: <1364580879-4297-4-git-send-email-florian@openwrt.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds the gigabit ethernet device tree node to orion5x.dtsi. This node is disabled by default and must be enabled on a per-board basis. For completeness and easier testing the MDIO node is also added and disabled by default. Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/orion5x.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 8aad00f..8d83220 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -94,5 +94,28 @@ interrupts = <22>; status = "okay"; }; + + mdio at 72004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x72004 0x84>; + status = "disabled"; + }; + + ethernet-group at 70000 { + #address-cells = <1>. + #size-cells = <0>; + compatible = "marvell,mv643xx-eth-block"; + reg = <0x70000 0x4000>; + status = "disabled"; + + egiga0: ethernet at 0 { + device_type = "network"; + compatible = "marvell,mv643xx-eth"; + reg = <0>; + interrupts = <21>; + }; + }; }; }; -- 1.7.10.4