[PATCH 2/2] Fix GE0/GE1 init on ix2-200 as GE0 has no PHY

Nigel Roberts
2013-03-31T04:13:24Z

---
arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index f655b26..e5f7041 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -20,10 +20,15 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
.duplex = DUPLEX_FULL,
};

+static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
+};
+
void __init iomega_ix2_200_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
+ kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
+ kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
}
--
1.7.9.5