linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tpiepho@gmail.com (Trent Piepho)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 02/12] spi/mxs: Remove mxs_spi_enable and mxs_spi_disable
Date: Tue,  2 Apr 2013 05:19:45 -0700	[thread overview]
Message-ID: <1364905195-24286-2-git-send-email-tpiepho@gmail.com> (raw)
In-Reply-To: <1364905195-24286-1-git-send-email-tpiepho@gmail.com>

These functions do nothing but one single writel call and are only
called in once.  And the names really aren't accurate or clear, since
they don't enable or disble SPI.  Rather they set the bit that
controls the state of CS at the end of transfer.  It easier to follow
the code to just set this bit with a writel() along with all the other
bits.

Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/spi/spi-mxs.c |   24 +++++-------------------
 1 file changed, 5 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 9334167..7eb4bc9 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -157,22 +157,6 @@ static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
 	writel(select, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 }
 
-static inline void mxs_spi_enable(struct mxs_spi *spi)
-{
-	struct mxs_ssp *ssp = &spi->ssp;
-
-	writel(BM_SSP_CTRL0_IGNORE_CRC,
-		ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
-}
-
-static inline void mxs_spi_disable(struct mxs_spi *spi)
-{
-	struct mxs_ssp *ssp = &spi->ssp;
-
-	writel(BM_SSP_CTRL0_IGNORE_CRC,
-		ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
-}
-
 static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
 {
 	const unsigned long timeout = jiffies + msecs_to_jiffies(SSP_TIMEOUT);
@@ -346,14 +330,16 @@ static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
 {
 	struct mxs_ssp *ssp = &spi->ssp;
 
-	if (*first)
-		mxs_spi_enable(spi);
+	/* Clear this now, set it on last transfer if needed */
+	writel(BM_SSP_CTRL0_IGNORE_CRC,
+	       ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
 
 	mxs_spi_set_cs(spi, cs);
 
 	while (len--) {
 		if (*last && len == 0)
-			mxs_spi_disable(spi);
+			writel(BM_SSP_CTRL0_IGNORE_CRC,
+			       ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 
 		if (ssp->devid == IMX23_SSP) {
 			writel(BM_SSP_CTRL0_XFER_COUNT,
-- 
1.7.10.4

  reply	other threads:[~2013-04-02 12:19 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-02 12:19 [PATCH V2 01/12] spi/mxs: Always set LOCK_CS Trent Piepho
2013-04-02 12:19 ` Trent Piepho [this message]
2013-04-02 12:19 ` [PATCH V2 03/12] spi/mxs: Change flag arguments in txrx functions to bit flags Trent Piepho
2013-04-02 23:24   ` Marek Vasut
2013-04-02 12:19 ` [PATCH V2 04/12] spi/mxs: Fix extra CS pulses and read mode in multi-transfer messages Trent Piepho
2013-04-02 12:19 ` [PATCH V2 05/12] spi/mxs: Fix chip select control bits in DMA mode Trent Piepho
2013-04-02 23:29   ` Marek Vasut
2013-04-02 12:19 ` [PATCH V2 06/12] spi/mxs: Remove full duplex check, spi core already does it Trent Piepho
2013-04-02 12:19 ` [PATCH V2 07/12] spi/mxs: Remove bogus setting of ssp clk rate field Trent Piepho
2013-04-02 12:19 ` [PATCH V2 08/12] spi/mxs: Fix race in setup method Trent Piepho
2013-04-02 23:31   ` Marek Vasut
2013-04-03  2:12     ` Trent Piepho
2013-04-03  2:27       ` Marek Vasut
2013-04-03  6:08         ` Trent Piepho
2013-04-03  6:50           ` Marek Vasut
2013-04-03  9:32             ` Trent Piepho
2013-04-02 12:19 ` [PATCH V2 09/12] spi/mxs: Remove check of spi mode bits Trent Piepho
2013-04-02 12:19 ` [PATCH V2 10/12] spi/mxs: Clean up setup_transfer function Trent Piepho
2013-04-02 23:35   ` Marek Vasut
2013-04-02 12:19 ` [PATCH V2 11/12] spi/mxs: Don't set clock for each xfer Trent Piepho
2013-04-02 23:38   ` Marek Vasut
2013-04-02 12:19 ` [PATCH V2 12/12] spi/mxs: Use u32 instead of uint32_t Trent Piepho
2013-04-02 23:18 ` [PATCH V2 01/12] spi/mxs: Always set LOCK_CS Marek Vasut
2013-07-10 13:49   ` Fabio Estevam
2013-07-10 15:29     ` Lothar Waßmann
2013-04-03  1:41 ` Shawn Guo
2013-04-14 18:01 ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1364905195-24286-2-git-send-email-tpiepho@gmail.com \
    --to=tpiepho@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).