* [PATCH v7 1/2] ARM: davinci: dm355: add support for v4l2 video display
2013-04-02 13:15 [PATCH v7 0/2] ARM: davinci: dm355: add support for vpbe display Prabhakar lad
@ 2013-04-02 13:15 ` Prabhakar lad
2013-04-04 9:17 ` Sekhar Nori
2013-04-02 13:15 ` [PATCH v7 2/2] ARM: davinci: dm355 EVM: add support for VPBE display Prabhakar lad
1 sibling, 1 reply; 5+ messages in thread
From: Prabhakar lad @ 2013-04-02 13:15 UTC (permalink / raw)
To: linux-arm-kernel
From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm355.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/mach-davinci/board-dm355-evm.c | 4 +-
arch/arm/mach-davinci/davinci.h | 3 +-
arch/arm/mach-davinci/dm355.c | 173 ++++++++++++++++++++++++++++++-
3 files changed, 172 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 147b8e1..37d12cc 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -253,8 +253,6 @@ static struct davinci_uart_config uart_config __initdata = {
static void __init dm355_evm_map_io(void)
{
- /* setup input configuration for VPFE input devices */
- dm355_set_vpfe_config(&vpfe_cfg);
dm355_init();
}
@@ -344,6 +342,8 @@ static __init void dm355_evm_init(void)
davinci_setup_mmc(0, &dm355evm_mmc_config);
davinci_setup_mmc(1, &dm355evm_mmc_config);
+ dm355_init_video(&vpfe_cfg, NULL);
+
dm355_init_spi0(BIT(0), dm355_evm_spi_info,
ARRAY_SIZE(dm355_evm_spi_info));
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index a9de512..5402592 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -39,6 +39,7 @@
#define SYSMOD_VDAC_CONFIG 0x2c
#define SYSMOD_VIDCLKCTL 0x38
#define SYSMOD_VPSS_CLKCTL 0x44
+#define VPSS_MUXSEL_EXTCLK_ENABLE BIT(1)
#define VPSS_VENCCLKEN_ENABLE BIT(3)
#define VPSS_DACCLKEN_ENABLE BIT(4)
#define VPSS_PLLC2SYSCLK5_ENABLE BIT(5)
@@ -79,7 +80,7 @@ void __init dm355_init(void);
void dm355_init_spi0(unsigned chipselect_mask,
const struct spi_board_info *info, unsigned len);
void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
-void dm355_set_vpfe_config(struct vpfe_config *cfg);
+int __init dm355_init_video(struct vpfe_config *, struct vpbe_config *);
/* DM365 function declarations */
void __init dm365_init(void);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 8e98bb0..174ad02 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -36,6 +36,10 @@
#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+#define DM355_OSD_BASE 0x01c70200
+
+#define DM355_VENC_BASE 0x01c70400
+
/*
* Device specific clocks
*/
@@ -744,11 +748,150 @@ static struct platform_device vpfe_capture_dev = {
},
};
-void dm355_set_vpfe_config(struct vpfe_config *cfg)
+static struct resource dm355_osd_resources[] = {
+ {
+ .start = DM355_OSD_BASE,
+ .end = DM355_OSD_BASE + 0x17f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dm355_osd_dev = {
+ .name = DM355_VPBE_OSD_SUBDEV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm355_osd_resources),
+ .resource = dm355_osd_resources,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource dm355_venc_resources[] = {
+ {
+ .start = IRQ_VENCINT,
+ .end = IRQ_VENCINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* venc registers io space */
+ {
+ .start = DM355_VENC_BASE,
+ .end = DM355_VENC_BASE + 0x17f,
+ .flags = IORESOURCE_MEM,
+ },
+ /* VDAC config register io space */
+ {
+ .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
+ .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource dm355_v4l2_disp_resources[] = {
+ {
+ .start = IRQ_VENCINT,
+ .end = IRQ_VENCINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* venc registers io space */
+ {
+ .start = DM355_VENC_BASE,
+ .end = DM355_VENC_BASE + 0x17f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int dm355_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type,
+ int field)
{
- vpfe_capture_dev.dev.platform_data = cfg;
+ switch (if_type) {
+ case V4L2_MBUS_FMT_SGRBG8_1X8:
+ davinci_cfg_reg(DM355_VOUT_FIELD_G70);
+ break;
+
+ case V4L2_MBUS_FMT_YUYV10_1X20:
+ if (field)
+ davinci_cfg_reg(DM355_VOUT_FIELD);
+ else
+ davinci_cfg_reg(DM355_VOUT_FIELD_G70);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ davinci_cfg_reg(DM355_VOUT_COUTL_EN);
+ davinci_cfg_reg(DM355_VOUT_COUTH_EN);
+
+ return 0;
+}
+
+static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
+ unsigned int pclock)
+{
+ void __iomem *vpss_clk_ctrl_reg;
+
+ vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
+
+ switch (type) {
+ case VPBE_ENC_STD:
+ writel(VPSS_DACCLKEN_ENABLE |
+ VPSS_VENCCLKEN_ENABLE, vpss_clk_ctrl_reg);
+ break;
+
+ case VPBE_ENC_DV_TIMINGS:
+ if (pclock > 27000000)
+ /*
+ * For HD, use external clock source since we cannot
+ * support HD mode with internal clocks.
+ */
+ writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
}
+static struct platform_device dm355_vpbe_display = {
+ .name = "vpbe-v4l2",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm355_v4l2_disp_resources),
+ .resource = dm355_v4l2_disp_resources,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct venc_platform_data dm355_venc_pdata = {
+ .setup_pinmux = dm355_vpbe_setup_pinmux,
+ .setup_clock = dm355_venc_setup_clock,
+};
+
+static struct platform_device dm355_venc_dev = {
+ .name = DM355_VPBE_VENC_SUBDEV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm355_venc_resources),
+ .resource = dm355_venc_resources,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = (void *)&dm355_venc_pdata,
+ },
+};
+
+static struct platform_device dm355_vpbe_dev = {
+ .name = "vpbe_controller",
+ .id = -1,
+ .dev = {
+ .dma_mask = &vpfe_capture_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
/*----------------------------------------------------------------------*/
static struct map_desc dm355_io_desc[] = {
@@ -868,6 +1011,29 @@ void __init dm355_init(void)
davinci_map_sysmod();
}
+int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
+ struct vpbe_config *vpbe_cfg)
+{
+ if (vpfe_cfg || vpbe_cfg)
+ platform_device_register(&dm355_vpss_device);
+
+ if (vpfe_cfg) {
+ vpfe_capture_dev.dev.platform_data = vpfe_cfg;
+ platform_device_register(&dm355_ccdc_dev);
+ platform_device_register(&vpfe_capture_dev);
+ }
+
+ if (vpbe_cfg) {
+ dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
+ platform_device_register(&dm355_osd_dev);
+ platform_device_register(&dm355_venc_dev);
+ platform_device_register(&dm355_vpbe_dev);
+ platform_device_register(&dm355_vpbe_display);
+ }
+
+ return 0;
+}
+
static int __init dm355_init_devices(void)
{
if (!cpu_is_davinci_dm355())
@@ -875,9 +1041,6 @@ static int __init dm355_init_devices(void)
davinci_cfg_reg(DM355_INT_EDMA_CC);
platform_device_register(&dm355_edma_device);
- platform_device_register(&dm355_vpss_device);
- platform_device_register(&dm355_ccdc_dev);
- platform_device_register(&vpfe_capture_dev);
return 0;
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v7 2/2] ARM: davinci: dm355 EVM: add support for VPBE display
2013-04-02 13:15 [PATCH v7 0/2] ARM: davinci: dm355: add support for vpbe display Prabhakar lad
2013-04-02 13:15 ` [PATCH v7 1/2] ARM: davinci: dm355: add support for v4l2 video display Prabhakar lad
@ 2013-04-02 13:15 ` Prabhakar lad
2013-04-04 9:20 ` Sekhar Nori
1 sibling, 1 reply; 5+ messages in thread
From: Prabhakar lad @ 2013-04-02 13:15 UTC (permalink / raw)
To: linux-arm-kernel
From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
add support for V4L2 video display to DM355 EVM.
Support for SD modes is provided, along with Composite
output
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
arch/arm/mach-davinci/board-dm355-evm.c | 69 ++++++++++++++++++++++++++++++-
1 files changed, 68 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 37d12cc..1043506 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -242,6 +242,73 @@ static struct vpfe_config vpfe_cfg = {
.ccdc = "DM355 CCDC",
};
+/* venc standards timings */
+static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
+ {
+ .name = "ntsc",
+ .timings_type = VPBE_ENC_STD,
+ .std_id = V4L2_STD_525_60,
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {11, 10},
+ .fps = {30000, 1001},
+ .left_margin = 0x79,
+ .upper_margin = 0x10,
+ },
+ {
+ .name = "pal",
+ .timings_type = VPBE_ENC_STD,
+ .std_id = V4L2_STD_625_50,
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {54, 59},
+ .fps = {25, 1},
+ .left_margin = 0x7E,
+ .upper_margin = 0x16
+ },
+};
+
+#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/*
+ * The outputs available from VPBE + ecnoders. Keep the
+ * the order same as that of encoders. First those from venc followed by that
+ * from encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more than
+ * one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm355evm_vpbe_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = VENC_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+ .subdev_name = DM355_VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "ntsc",
+ .num_modes = ARRAY_SIZE(dm355evm_enc_preset_timing),
+ .modes = dm355evm_enc_preset_timing,
+ .if_params = V4L2_MBUS_FMT_FIXED,
+ },
+};
+
+static struct vpbe_config dm355evm_display_cfg = {
+ .module_name = "dm355-vpbe-display",
+ .i2c_adapter_id = 1,
+ .osd = {
+ .module_name = DM355_VPBE_OSD_SUBDEV_NAME,
+ },
+ .venc = {
+ .module_name = DM355_VPBE_VENC_SUBDEV_NAME,
+ },
+ .num_outputs = ARRAY_SIZE(dm355evm_vpbe_outputs),
+ .outputs = dm355evm_vpbe_outputs,
+};
+
static struct platform_device *davinci_evm_devices[] __initdata = {
&dm355evm_dm9000,
&davinci_nand_device,
@@ -342,7 +409,7 @@ static __init void dm355_evm_init(void)
davinci_setup_mmc(0, &dm355evm_mmc_config);
davinci_setup_mmc(1, &dm355evm_mmc_config);
- dm355_init_video(&vpfe_cfg, NULL);
+ dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
dm355_init_spi0(BIT(0), dm355_evm_spi_info,
ARRAY_SIZE(dm355_evm_spi_info));
--
1.7.4.1
^ permalink raw reply related [flat|nested] 5+ messages in thread