From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 9/9] POWERPC: pseries: cpuidle: use time keeping flag
Date: Wed, 3 Apr 2013 14:15:22 +0200 [thread overview]
Message-ID: <1364991322-20585-9-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1364991322-20585-1-git-send-email-daniel.lezcano@linaro.org>
The current code computes the idle time but that can be handled
by the cpuidle framework if we enable the .en_core_tk_irqen flag.
Set the flag and remove the code related to the time computation.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
---
arch/powerpc/platforms/pseries/processor_idle.c | 35 ++++++++++-------------
1 file changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 4d806b4..a197120 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -23,8 +23,9 @@
#include "pseries.h"
struct cpuidle_driver pseries_idle_driver = {
- .name = "pseries_idle",
- .owner = THIS_MODULE,
+ .name = "pseries_idle",
+ .owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
};
#define MAX_IDLE_STATE_COUNT 2
@@ -33,10 +34,8 @@ static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
static struct cpuidle_device __percpu *pseries_cpuidle_devices;
static struct cpuidle_state *cpuidle_state_table;
-static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+static inline void idle_loop_prolog(unsigned long *in_purr)
{
-
- *kt_before = ktime_get();
*in_purr = mfspr(SPRN_PURR);
/*
* Indicate to the HV that we are idle. Now would be
@@ -45,12 +44,10 @@ static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
get_lppaca()->idle = 1;
}
-static inline s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+static inline void idle_loop_epilog(unsigned long in_purr)
{
get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
get_lppaca()->idle = 0;
-
- return ktime_to_us(ktime_sub(ktime_get(), kt_before));
}
static int snooze_loop(struct cpuidle_device *dev,
@@ -58,10 +55,9 @@ static int snooze_loop(struct cpuidle_device *dev,
int index)
{
unsigned long in_purr;
- ktime_t kt_before;
int cpu = dev->cpu;
- idle_loop_prolog(&in_purr, &kt_before);
+ idle_loop_prolog(&in_purr);
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
@@ -75,8 +71,8 @@ static int snooze_loop(struct cpuidle_device *dev,
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb();
- dev->last_residency =
- (int)idle_loop_epilog(in_purr, kt_before);
+ idle_loop_epilog(in_purr);
+
return index;
}
@@ -102,9 +98,8 @@ static int dedicated_cede_loop(struct cpuidle_device *dev,
int index)
{
unsigned long in_purr;
- ktime_t kt_before;
- idle_loop_prolog(&in_purr, &kt_before);
+ idle_loop_prolog(&in_purr);
get_lppaca()->donate_dedicated_cpu = 1;
ppc64_runlatch_off();
@@ -112,8 +107,9 @@ static int dedicated_cede_loop(struct cpuidle_device *dev,
check_and_cede_processor();
get_lppaca()->donate_dedicated_cpu = 0;
- dev->last_residency =
- (int)idle_loop_epilog(in_purr, kt_before);
+
+ idle_loop_epilog(in_purr);
+
return index;
}
@@ -122,9 +118,8 @@ static int shared_cede_loop(struct cpuidle_device *dev,
int index)
{
unsigned long in_purr;
- ktime_t kt_before;
- idle_loop_prolog(&in_purr, &kt_before);
+ idle_loop_prolog(&in_purr);
/*
* Yield the processor to the hypervisor. We return if
@@ -135,8 +130,8 @@ static int shared_cede_loop(struct cpuidle_device *dev,
*/
check_and_cede_processor();
- dev->last_residency =
- (int)idle_loop_epilog(in_purr, kt_before);
+ idle_loop_epilog(in_purr);
+
return index;
}
--
1.7.9.5
next prev parent reply other threads:[~2013-04-03 12:15 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-03 12:15 [PATCH 1/9] ARM: cpuidle: remove useless declaration Daniel Lezcano
2013-04-03 12:15 ` [PATCH 2/9] ARM: shmobile: pm: fix init sections Daniel Lezcano
2013-04-03 12:15 ` [PATCH 3/9] ARM: shmobile: cpuidle: remove useless WFI function Daniel Lezcano
2013-04-03 12:15 ` [PATCH 4/9] ARM: tegra2: cpuidle: change driver initialization Daniel Lezcano
2013-04-03 12:15 ` [PATCH 5/9] ARM: tegra: cpuidle: remove useless initialization Daniel Lezcano
2013-04-03 12:15 ` [PATCH 6/9] ARM: davinci: cpuidle: fix wrong enter function Daniel Lezcano
2013-04-04 7:16 ` Sekhar Nori
2013-04-03 12:15 ` [PATCH 7/9] intel: cpuidle: remove stop/start critical timings Daniel Lezcano
2013-04-04 22:31 ` Rafael J. Wysocki
2013-04-07 20:52 ` Daniel Lezcano
2013-04-08 17:40 ` Daniel Lezcano
2013-04-08 19:27 ` Rafael J. Wysocki
2013-04-08 19:27 ` Daniel Lezcano
2013-04-19 22:02 ` Len Brown
2013-04-03 12:15 ` [PATCH 8/9] ARM: omap3: cpuidle: enable time keeping Daniel Lezcano
2013-04-03 17:47 ` Kevin Hilman
2013-04-03 20:49 ` Daniel Lezcano
2013-04-03 21:43 ` Kevin Hilman
2013-04-03 12:15 ` Daniel Lezcano [this message]
2013-04-03 14:25 ` [PATCH 9/9] POWERPC: pseries: cpuidle: use time keeping flag Daniel Lezcano
2013-04-04 11:01 ` Deepthi Dharwar
2013-04-03 12:23 ` [PATCH 1/9] ARM: cpuidle: remove useless declaration Daniel Lezcano
2013-04-08 20:50 ` Rafael J. Wysocki
2013-04-08 20:53 ` Daniel Lezcano
2013-04-18 14:13 ` Russell King - ARM Linux
2013-04-18 14:31 ` Daniel Lezcano
2013-04-18 15:42 ` Russell King - ARM Linux
2013-04-18 15:47 ` Daniel Lezcano
2013-04-04 22:30 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364991322-20585-9-git-send-email-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).