[PATCH] cpu_kill/cpu_die coordination

[PATCH] cpu_kill/cpu_die coordination

[Kevin Bracey]

I've been having problems handshaking between cpu_kill and cpu_die, due to the
fact that they don't always occur together. It seems to me that this patch is
basically what's needed. I'm working on 3.4-based code, but the logic doesn't
seem to have changed since then.

Searches didn't show much activity in this area - it appears that I'm on the
only upstream platform actually implementing cpu_kill, which may explain why
it's not been noticed.

Only related topic I found was this discussion:

     https://patchwork.kernel.org/patch/1898311/

which could maybe be short-circuited by this patch.

Kevin Bracey (1):
  ARM: smp: call platform's cpu_die in ipi_cpu_stop

 arch/arm/kernel/smp.c | 3 +++
 1 file changed, 3 insertions(+)

-- 
1.8.2.445.gfcda34b

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Kevin Bracey]

When hotplugging out, both cpu_kill and cpu_die have always been called.
But when smp_send_stop was used in machine_shutdown or panic, only
cpu_kill was called.

This causes problems for co-ordination between cpu_kill and cpu_die, as
attempted by shmobile. So add cpu_die call to ipi_cpu_stop, to ensure
that cpu_kill and cpu_die calls always occur together.

Signed-off-by: Kevin Bracey <kevin@bracey.fi>
---
 arch/arm/kernel/smp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 84f4cbf..6692bba 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -572,6 +572,9 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
+	if (smp_ops.cpu_die)
+		smp_ops.cpu_die(cpu);
+
 	while (1)
 		cpu_relax();
 }
-- 
1.8.2.445.gfcda34b

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Russell King - ARM Linux]

On Sat, Apr 06, 2013 at 03:37:04PM +0300, Kevin Bracey wrote:
> When hotplugging out, both cpu_kill and cpu_die have always been called.
> But when smp_send_stop was used in machine_shutdown or panic, only
> cpu_kill was called.
> 
> This causes problems for co-ordination between cpu_kill and cpu_die, as
> attempted by shmobile. So add cpu_die call to ipi_cpu_stop, to ensure
> that cpu_kill and cpu_die calls always occur together.

Actually, I'd prefer to pull more code out of the platforms.  Now
that we have flush_cache_louis(), we can flush the L1 cache for the
CPU going down in cpu_die() itself.  We just need to be careful
with that complete() call to ensure that becomes visible to other
cores before power is cut to the L1 cache.

That's fine though - because it must become visible for __cpu_die()
to continue (otherwise it will time out).

That should render shmobile's cpu_dead thing unnecessary, because the
platform independent code will do the required synchronisation.

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Russell King - ARM Linux]

On Thu, Apr 18, 2013 at 06:18:01PM +0100, Russell King - ARM Linux wrote:
> On Sat, Apr 06, 2013 at 03:37:04PM +0300, Kevin Bracey wrote:
> > When hotplugging out, both cpu_kill and cpu_die have always been called.
> > But when smp_send_stop was used in machine_shutdown or panic, only
> > cpu_kill was called.
> > 
> > This causes problems for co-ordination between cpu_kill and cpu_die, as
> > attempted by shmobile. So add cpu_die call to ipi_cpu_stop, to ensure
> > that cpu_kill and cpu_die calls always occur together.
> 
> Actually, I'd prefer to pull more code out of the platforms.  Now
> that we have flush_cache_louis(), we can flush the L1 cache for the
> CPU going down in cpu_die() itself.  We just need to be careful
> with that complete() call to ensure that becomes visible to other
> cores before power is cut to the L1 cache.
> 
> That's fine though - because it must become visible for __cpu_die()
> to continue (otherwise it will time out).
> 
> That should render shmobile's cpu_dead thing unnecessary, because the
> platform independent code will do the required synchronisation.

So, something like the below (which is a combined patch of three).  The
key points here being that:

1. We flush the L1 cache in cpu_die(), which pushes any dirty cache lines
   out of the L1 cache and invalidates it.  At the point this function
   completes, any data in the L1 cache has been pushed out and all
   cache lines are invalid.
2. We complete(), which allows __cpu_die() to proceed and call
   platform_cpu_kill().  This may create dirty cache lines which this
   CPU exclusively owns, but the CPU in __cpu_die() will gain those
   cache lines before wait_for_completion() can return - not only the
   completion counter but also the spinlock, which this CPU will have
   ended up reading and writing - and so can no longer be owned by the
   dying CPU.
3. The following mb() is belt and braces to ensure that the completion
   is visible.  It isn't strictly required because the spinlocks will
   do the necessary stuff to ensure this.
4. Any dirtying of the cache after this rellay doesn't matter _if_ only
   the stack is touched, or other data is only read.
5. I've left those platforms which disable the L1 cache, then flush
   alone; that _should_ be removable with this patch as well, but as
   a separate patch.

Now, with this patch applied, we guarantee that we push out any data
that matters from the dying CPU before platform_cpu_kill() is called.
That should mean that shmobile can remove that whole cpu_dead thing.

I've tested this on OMAP, and it appears to work from a simple test of
CPU hotplug.  This patch(set) also kills the cpu_disable() that tegra
has which is just a copy of the generic version.

 arch/arm/kernel/smp.c               |    4 ++++
 arch/arm/mach-exynos/hotplug.c      |    1 -
 arch/arm/mach-highbank/hotplug.c    |    4 ----
 arch/arm/mach-imx/hotplug.c         |    2 --
 arch/arm/mach-msm/hotplug.c         |    4 ----
 arch/arm/mach-omap2/omap-hotplug.c  |    3 ---
 arch/arm/mach-prima2/hotplug.c      |    3 ---
 arch/arm/mach-realview/hotplug.c    |    2 --
 arch/arm/mach-shmobile/smp-sh73a0.c |    8 --------
 arch/arm/mach-spear13xx/hotplug.c   |    2 --
 arch/arm/mach-tegra/common.h        |    1 -
 arch/arm/mach-tegra/hotplug.c       |   10 ----------
 arch/arm/mach-tegra/platsmp.c       |    1 -
 arch/arm/mach-ux500/hotplug.c       |    3 ---
 arch/arm/mach-vexpress/hotplug.c    |    2 --
 15 files changed, 4 insertions(+), 46 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 1f2cccc..d0cb2e1 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -230,10 +230,14 @@ void __ref cpu_die(void)
 	idle_task_exit();
 
 	local_irq_disable();
+
+	/* Flush the data out of the L1 cache for this CPU. */
+	flush_cache_louis();
 	mb();
 
 	/* Tell __cpu_die() that this CPU is now safe to dispose of */
 	RCU_NONIDLE(complete(&cpu_died));
+	mb();
 
 	/*
 	 * actual CPU shutdown procedure is at least platform (if not
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index c3f825b..af90cfa 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -28,7 +28,6 @@ static inline void cpu_enter_lowpower_a9(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 	"	mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
index f30c528..35dd42e 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -15,8 +15,6 @@
  */
 #include <linux/kernel.h>
 
-#include <asm/cacheflush.h>
-
 #include "core.h"
 #include "sysregs.h"
 
@@ -28,8 +26,6 @@ extern void secondary_startup(void);
  */
 void __ref highbank_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
-
 	highbank_set_cpu_jump(cpu, phys_to_virt(0));
 	highbank_set_core_pwr();
 
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 361a253..5e91112 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/errno.h>
-#include <asm/cacheflush.h>
 #include <asm/cp15.h>
 
 #include "common.h"
@@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 		"mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
index 750446f..326a872 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
@@ -10,16 +10,12 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 #include "common.h"
 
 static inline void cpu_enter_lowpower(void)
 {
-	/* Just flush the cache. Changing the coherency is not yet
-	 * available on msm. */
-	flush_cache_all();
 }
 
 static inline void cpu_leave_lowpower(void)
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index e712d17..ceb30a5 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -35,9 +35,6 @@ void __ref omap4_cpu_die(unsigned int cpu)
 	unsigned int boot_cpu = 0;
 	void __iomem *base = omap_get_wakeupgen_base();
 
-	flush_cache_all();
-	dsb();
-
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c
index f4b17cb..0ab2f8b 100644
--- a/arch/arm/mach-prima2/hotplug.c
+++ b/arch/arm/mach-prima2/hotplug.c
@@ -10,13 +10,10 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 static inline void platform_do_lowpower(unsigned int cpu)
 {
-	flush_cache_all();
-
 	/* we put the platform to just WFI */
 	for (;;) {
 		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index 53818e5..ac22dd4 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -12,7 +12,6 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
@@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 	"	mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index acb46a9..2f1ef1b 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -119,14 +119,6 @@ static int sh73a0_cpu_kill(unsigned int cpu)
 
 static void sh73a0_cpu_die(unsigned int cpu)
 {
-	/*
-	 * The ARM MPcore does not issue a cache coherency request for the L1
-	 * cache when powering off single CPUs. We must take care of this and
-	 * further caches.
-	 */
-	dsb();
-	flush_cache_all();
-
 	/* Set power off mode. This takes the CPU out of the MP cluster */
 	scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF);
 
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c
index a7d2dd1..d97749c 100644
--- a/arch/arm/mach-spear13xx/hotplug.c
+++ b/arch/arm/mach-spear13xx/hotplug.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
@@ -21,7 +20,6 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 	"	mcr	p15, 0, %1, c7, c5, 0\n"
 	"	dsb\n"
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 32f8eb3..5900cc4 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -2,4 +2,3 @@ extern struct smp_operations tegra_smp_ops;
 
 extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
-extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index a599f6e..e8323bc 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -12,7 +12,6 @@
 #include <linux/smp.h>
 #include <linux/clk/tegra.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 #include "sleep.h"
@@ -47,15 +46,6 @@ void __ref tegra_cpu_die(unsigned int cpu)
 	BUG();
 }
 
-int tegra_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
-
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 extern void tegra20_hotplug_shutdown(void);
 void __init tegra20_hotplug_init(void)
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 2c6b3d5..ec33ec8 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -192,6 +192,5 @@ struct smp_operations tegra_smp_ops __initdata = {
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= tegra_cpu_kill,
 	.cpu_die		= tegra_cpu_die,
-	.cpu_disable		= tegra_cpu_disable,
 #endif
 };
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index 2f6af25..1c55a55 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -12,7 +12,6 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 #include <mach/setup.h>
@@ -24,8 +23,6 @@
  */
 void __ref ux500_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
-
 	/* directly enter low power state, skipping secure registers */
 	for (;;) {
 		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index a141b98..f0ce6b8 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -12,7 +12,6 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/cp15.h>
 
@@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 		"mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Russell King - ARM Linux]

On Thu, Apr 18, 2013 at 07:25:34PM +0100, Russell King - ARM Linux wrote:
> On Thu, Apr 18, 2013 at 06:18:01PM +0100, Russell King - ARM Linux wrote:
> > On Sat, Apr 06, 2013 at 03:37:04PM +0300, Kevin Bracey wrote:
> > > When hotplugging out, both cpu_kill and cpu_die have always been called.
> > > But when smp_send_stop was used in machine_shutdown or panic, only
> > > cpu_kill was called.
> > > 
> > > This causes problems for co-ordination between cpu_kill and cpu_die, as
> > > attempted by shmobile. So add cpu_die call to ipi_cpu_stop, to ensure
> > > that cpu_kill and cpu_die calls always occur together.
> > 
> > Actually, I'd prefer to pull more code out of the platforms.  Now
> > that we have flush_cache_louis(), we can flush the L1 cache for the
> > CPU going down in cpu_die() itself.  We just need to be careful
> > with that complete() call to ensure that becomes visible to other
> > cores before power is cut to the L1 cache.
> > 
> > That's fine though - because it must become visible for __cpu_die()
> > to continue (otherwise it will time out).
> > 
> > That should render shmobile's cpu_dead thing unnecessary, because the
> > platform independent code will do the required synchronisation.
> 
> So, something like the below (which is a combined patch of three).  The
> key points here being that:
> 
> 1. We flush the L1 cache in cpu_die(), which pushes any dirty cache lines
>    out of the L1 cache and invalidates it.  At the point this function
>    completes, any data in the L1 cache has been pushed out and all
>    cache lines are invalid.
> 2. We complete(), which allows __cpu_die() to proceed and call
>    platform_cpu_kill().  This may create dirty cache lines which this
>    CPU exclusively owns, but the CPU in __cpu_die() will gain those
>    cache lines before wait_for_completion() can return - not only the
>    completion counter but also the spinlock, which this CPU will have
>    ended up reading and writing - and so can no longer be owned by the
>    dying CPU.
> 3. The following mb() is belt and braces to ensure that the completion
>    is visible.  It isn't strictly required because the spinlocks will
>    do the necessary stuff to ensure this.
> 4. Any dirtying of the cache after this rellay doesn't matter _if_ only
>    the stack is touched, or other data is only read.
> 5. I've left those platforms which disable the L1 cache, then flush
>    alone; that _should_ be removable with this patch as well, but as
>    a separate patch.
> 
> Now, with this patch applied, we guarantee that we push out any data
> that matters from the dying CPU before platform_cpu_kill() is called.
> That should mean that shmobile can remove that whole cpu_dead thing.
> 
> I've tested this on OMAP, and it appears to work from a simple test of
> CPU hotplug.  This patch(set) also kills the cpu_disable() that tegra
> has which is just a copy of the generic version.

Okay, last version for tonight, with additional comments too, and a
hole plugged if the powering down is done by the platform via
cpu_die().

 arch/arm/kernel/smp.c               |   42 +++++++++++++++++++++++++++++++---
 arch/arm/mach-exynos/hotplug.c      |    1 -
 arch/arm/mach-highbank/hotplug.c    |    4 ---
 arch/arm/mach-imx/hotplug.c         |    2 -
 arch/arm/mach-msm/hotplug.c         |    4 ---
 arch/arm/mach-omap2/omap-hotplug.c  |    3 --
 arch/arm/mach-prima2/hotplug.c      |    3 --
 arch/arm/mach-realview/hotplug.c    |    2 -
 arch/arm/mach-shmobile/smp-sh73a0.c |    8 ------
 arch/arm/mach-spear13xx/hotplug.c   |    2 -
 arch/arm/mach-tegra/common.h        |    1 -
 arch/arm/mach-tegra/hotplug.c       |   10 --------
 arch/arm/mach-tegra/platsmp.c       |    1 -
 arch/arm/mach-ux500/hotplug.c       |    3 --
 arch/arm/mach-vexpress/hotplug.c    |    2 -
 15 files changed, 38 insertions(+), 50 deletions(-)

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 1f2cccc..4231034 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -211,6 +211,13 @@ void __cpuinit __cpu_die(unsigned int cpu)
 	}
 	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
 
+	/*
+	 * platform_cpu_kill() is generally expected to do the powering off
+	 * and/or cutting of clocks to the dying CPU.  Optionally, this may
+	 * be done by the CPU which is dying in preference to supporting
+	 * this call, but that means there is _no_ synchronisation between
+	 * the requesting CPU and the dying CPU actually losing power.
+	 */
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
 }
@@ -230,14 +237,41 @@ void __ref cpu_die(void)
 	idle_task_exit();
 
 	local_irq_disable();
-	mb();
 
-	/* Tell __cpu_die() that this CPU is now safe to dispose of */
+	/*
+	 * Flush the data out of the L1 cache for this CPU.  This must be
+	 * before the completion to ensure that data is safely written out
+	 * before platform_cpu_kill() gets called - which may disable
+	 * *this* CPU and power down its cache.
+	 */
+	flush_cache_louis();
+
+	/*
+	 * Tell __cpu_die() that this CPU is now safe to dispose of.  Once
+	 * this returns, power and/or clocks can be removed at any point
+	 * from this CPU and its cache by platform_cpu_kill().
+	 */
 	RCU_NONIDLE(complete(&cpu_died));
 
 	/*
-	 * actual CPU shutdown procedure is at least platform (if not
-	 * CPU) specific.
+	 * Ensure that the cache lines associated with that completion are
+	 * written out.  This covers the case where _this_ CPU is doing the
+	 * powering down, to ensure that the completion is visible to the
+	 * CPU waiting for this one.
+	 */
+	flush_cache_louis();
+
+	/*
+	 * The actual CPU shutdown procedure is at least platform (if not
+	 * CPU) specific.  This may remove power, or it may simply spin.
+	 *
+	 * Platforms are generally expected *NOT* to return from this call,
+	 * although there are some which do because they have no way to
+	 * power down the CPU.  These platforms are the _only_ reason we
+	 * have a return path which uses the fragment of assembly below.
+	 *
+	 * The return path should not be used for platforms which can
+	 * power off the CPU.
 	 */
 	if (smp_ops.cpu_die)
 		smp_ops.cpu_die(cpu);
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index c3f825b..af90cfa 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -28,7 +28,6 @@ static inline void cpu_enter_lowpower_a9(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 	"	mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
index f30c528..35dd42e 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -15,8 +15,6 @@
  */
 #include <linux/kernel.h>
 
-#include <asm/cacheflush.h>
-
 #include "core.h"
 #include "sysregs.h"
 
@@ -28,8 +26,6 @@ extern void secondary_startup(void);
  */
 void __ref highbank_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
-
 	highbank_set_cpu_jump(cpu, phys_to_virt(0));
 	highbank_set_core_pwr();
 
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 361a253..5e91112 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/errno.h>
-#include <asm/cacheflush.h>
 #include <asm/cp15.h>
 
 #include "common.h"
@@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 		"mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
index 750446f..326a872 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
@@ -10,16 +10,12 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 #include "common.h"
 
 static inline void cpu_enter_lowpower(void)
 {
-	/* Just flush the cache. Changing the coherency is not yet
-	 * available on msm. */
-	flush_cache_all();
 }
 
 static inline void cpu_leave_lowpower(void)
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index e712d17..ceb30a5 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -35,9 +35,6 @@ void __ref omap4_cpu_die(unsigned int cpu)
 	unsigned int boot_cpu = 0;
 	void __iomem *base = omap_get_wakeupgen_base();
 
-	flush_cache_all();
-	dsb();
-
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c
index f4b17cb..0ab2f8b 100644
--- a/arch/arm/mach-prima2/hotplug.c
+++ b/arch/arm/mach-prima2/hotplug.c
@@ -10,13 +10,10 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 static inline void platform_do_lowpower(unsigned int cpu)
 {
-	flush_cache_all();
-
 	/* we put the platform to just WFI */
 	for (;;) {
 		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index 53818e5..ac22dd4 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -12,7 +12,6 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
@@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 	"	mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index acb46a9..2f1ef1b 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -119,14 +119,6 @@ static int sh73a0_cpu_kill(unsigned int cpu)
 
 static void sh73a0_cpu_die(unsigned int cpu)
 {
-	/*
-	 * The ARM MPcore does not issue a cache coherency request for the L1
-	 * cache when powering off single CPUs. We must take care of this and
-	 * further caches.
-	 */
-	dsb();
-	flush_cache_all();
-
 	/* Set power off mode. This takes the CPU out of the MP cluster */
 	scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF);
 
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c
index a7d2dd1..d97749c 100644
--- a/arch/arm/mach-spear13xx/hotplug.c
+++ b/arch/arm/mach-spear13xx/hotplug.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
@@ -21,7 +20,6 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 	"	mcr	p15, 0, %1, c7, c5, 0\n"
 	"	dsb\n"
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 32f8eb3..5900cc4 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -2,4 +2,3 @@ extern struct smp_operations tegra_smp_ops;
 
 extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
-extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index a599f6e..e8323bc 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -12,7 +12,6 @@
 #include <linux/smp.h>
 #include <linux/clk/tegra.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 #include "sleep.h"
@@ -47,15 +46,6 @@ void __ref tegra_cpu_die(unsigned int cpu)
 	BUG();
 }
 
-int tegra_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
-
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 extern void tegra20_hotplug_shutdown(void);
 void __init tegra20_hotplug_init(void)
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 2c6b3d5..ec33ec8 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -192,6 +192,5 @@ struct smp_operations tegra_smp_ops __initdata = {
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= tegra_cpu_kill,
 	.cpu_die		= tegra_cpu_die,
-	.cpu_disable		= tegra_cpu_disable,
 #endif
 };
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index 2f6af25..1c55a55 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -12,7 +12,6 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 #include <mach/setup.h>
@@ -24,8 +23,6 @@
  */
 void __ref ux500_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
-
 	/* directly enter low power state, skipping secure registers */
 	for (;;) {
 		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index a141b98..f0ce6b8 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -12,7 +12,6 @@
 #include <linux/errno.h>
 #include <linux/smp.h>
 
-#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/cp15.h>
 
@@ -20,7 +19,6 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	flush_cache_all();
 	asm volatile(
 		"mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Kevin Bracey]

On 18/04/2013 21:25, Russell King - ARM Linux wrote:
> Now, with this patch applied, we guarantee that we push out any data 
> that matters from the dying CPU before platform_cpu_kill() is called. 
> That should mean that shmobile can remove that whole cpu_dead thing.

Patch looks supremely sensible. Clearly there is more centralisation 
needed for the generic cache issue, and that addresses the currently 
upstream shmobile stuff.

But I had also been intending to have "post-kill" co-ordination for 
power control and error reporting. Something along the lines of:

1) cpu_die tells the power hardware to shut down the core on next 
STANDBYWFI assertion, then does the final chip-specific clear-up, then WFI.

2) cpu_kill waits for the power hardware to report shutdown of that 
core, and reports success, or failure after timeout.

That seemed logical, but it just doesn't fly when cpu_kill routinely 
occurs without cpu_die. We again end up timing out (once per CPU) in 
that case, which can add a significant time to panic/shutdown.

Am I on the right lines here, or misunderstanding? It seems like a 
pretty natural thing to attempt. And it would have worked fine before 
the die-less kill was added to smp_send_stop.

If anyone ever has both die and kill implemented and doing something in 
a platform, they will have to have some sort of co-ordination, as 
there's a race for kill running before die is finished. (Although it 
could be that what they do is so simple/fast that die is "guaranteed" to 
win the race). This patch takes the slow cache clean out, so solves it 
for that, but the essential race problem remains for anything 
platform-specific in cpu_die. So I still think every kill needs a die. 
Unless you expect each platform to use only one of the hooks.

Alternatively, I guess you could just pass a parameter to cpu_kill to 
tell it "I'm not sending a die request". (I've not figured out a way to 
deduce it). In which case, cpu_kill would just become a NOP in that case 
for me. Although wasn't the original motivation for it being added to 
smp_send_stop that it would do the necessary to power down the core for 
a kexec restart? So it wouldn't achieve that.

Kevin

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Russell King - ARM Linux]

On Thu, Apr 18, 2013 at 10:44:49PM +0300, Kevin Bracey wrote:
> On 18/04/2013 21:25, Russell King - ARM Linux wrote:
>> Now, with this patch applied, we guarantee that we push out any data  
>> that matters from the dying CPU before platform_cpu_kill() is called.  
>> That should mean that shmobile can remove that whole cpu_dead thing.
>
> Patch looks supremely sensible. Clearly there is more centralisation  
> needed for the generic cache issue, and that addresses the currently  
> upstream shmobile stuff.
>
> But I had also been intending to have "post-kill" co-ordination for  
> power control and error reporting. Something along the lines of:
>
> 1) cpu_die tells the power hardware to shut down the core on next  
> STANDBYWFI assertion, then does the final chip-specific clear-up, then 
> WFI.
>
> 2) cpu_kill waits for the power hardware to report shutdown of that  
> core, and reports success, or failure after timeout.
>
> That seemed logical, but it just doesn't fly when cpu_kill routinely  
> occurs without cpu_die. We again end up timing out (once per CPU) in  
> that case, which can add a significant time to panic/shutdown.
>
> Am I on the right lines here, or misunderstanding? It seems like a  
> pretty natural thing to attempt. And it would have worked fine before  
> the die-less kill was added to smp_send_stop.

Well, the idea as far as hotplug CPU is concerned is that we guarantee
in core code that platform_cpu_kill() will not be called until it is
safe for the dying CPU to be powered off - so the synchronisation is
done by the core code.  That's always been what the completion stuff
is about in arch/arm/kernel/smp.c.

It was missing the cache bits because (a) the ARM development platforms
don't actually take the CPUs offline, and (b) we never really had an
API at the time hotplug CPU was designed to flush just the local CPUs
L1 cache.

Now, practically, most platforms which cut power/clocks to the CPU do
it in one of two ways.  Either they do it in their cpu_die() callback,
via WFI, or they do it from a running CPU via the cpu_kill() callback.

Either way, platforms are not expected to have any further
synchronisation.  Once that complete() call has returned, the dying
CPU is expected to become dead very shortly after that point - whether
that be as a result of cpu_kill() or cpu_die().

> If anyone ever has both die and kill implemented and doing something in  
> a platform, they will have to have some sort of co-ordination, as  
> there's a race for kill running before die is finished. (Although it  
> could be that what they do is so simple/fast that die is "guaranteed" to  
> win the race). This patch takes the slow cache clean out, so solves it  
> for that, but the essential race problem remains for anything  
> platform-specific in cpu_die. So I still think every kill needs a die.  
> Unless you expect each platform to use only one of the hooks.

The whole point is to stop platforms having to implement synchronisation
in these callbacks, with all the bugs that will cause.  The patch I
posted took about an hour of thought and walking through, and discussion
with Will to make sure that all issues had been covered.  Taking a CPU
offline safely is far from trivial, and the less code that a platform
has to do the better.

Now, as for the stop IPI, what we do there is debatable, because that
gets used for several purposes, which includes a bringing the machine
to a halt after a kernel panic.  In those situations, doing the
synchronisation is not appropriate, because we may be panicing because
something has gone wrong in the scheduler.  So, solving that part
safely is going to be far from trivial.

The whole idea there at the _moment_ is that it's safer to make the CPU
core spin, and _maybe_ have it powered down by the kill stuff than it
is to try and call out to platform code.  But that's not what kexec
needs - that needs the CPU cores thrown back into a state as if the
system was first booting.  Some platforms can do that, others have
absolutely no way to do that.  This is _very_ hit and miss on what's
possible.

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Kevin Bracey]

On 18/04/2013 22:57, Russell King - ARM Linux wrote:
> Well, the idea as far as hotplug CPU is concerned is that we guarantee
> in core code that platform_cpu_kill() will not be called until it is
> safe for the dying CPU to be powered off - so the synchronisation is
> done by the core code.  That's always been what the completion stuff
> is about in arch/arm/kernel/smp.c.
>
> It was missing the cache bits because (a) the ARM development platforms
> don't actually take the CPUs offline, and (b) we never really had an
> API at the time hotplug CPU was designed to flush just the local CPUs
> L1 cache.
>
> Now, practically, most platforms which cut power/clocks to the CPU do
> it in one of two ways.  Either they do it in their cpu_die() callback,
> via WFI, or they do it from a running CPU via the cpu_kill() callback.
>
> Either way, platforms are not expected to have any further
> synchronisation.  Once that complete() call has returned, the dying
> CPU is expected to become dead very shortly after that point - whether
> that be as a result of cpu_kill() or cpu_die().
>
> The whole point is to stop platforms having to implement synchronisation
> in these callbacks, with all the bugs that will cause.  The patch I
> posted took about an hour of thought and walking through, and discussion
> with Will to make sure that all issues had been covered.  Taking a CPU
> offline safely is far from trivial, and the less code that a platform
> has to do the better.
>
>
Okay, so in the final analysis, would this be a reasonable summary?

* Generally a hotplug platform will implement either cpu_kill, or 
cpu_die, but not normally both;

* it should be up to the core code to ensure that a CPU is safe to be 
killed before cpu_kill is entered, w.r.t. non-platform-specifics like 
the cache;

* if both calls are implemented, cpu_kill can't assume that cpu_die will 
be called, so shouldn't depend on co-ordinating with it;

* because cpu_kill is used in panic-type contexts, it shouldn't be 
attempting anything complex anyway;

* the current framework wouldn't straightforwardly support a 
platform-specific requirement for hotplug-out like "hardware register X 
must be poked after the dying core has entered STANDBYWFI", due to the 
above restrictions.

I can't say for certain at this stage whether I do have a requirement 
like the last, but I fear I might do. So at present, I'd be fine with 
your patch dealing with the cache, but I'm just worried that it won't be 
enough.

It just all still feels a little bit off; the system is overly 
constrained by the ipi_cpu_stop case. It feels to me that life would be 
simpler if there was a distinction between "hotplug cpu kill" and 
"emergency cpu kill", which would then permit more ambitious platform 
hotplug code. Is there some way I've missed that would allow me to 
distinguish the two cases in the current framework?

Kevin

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Rob Herring]

On Thu, Apr 18, 2013 at 2:09 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Thu, Apr 18, 2013 at 07:25:34PM +0100, Russell King - ARM Linux wrote:
>> On Thu, Apr 18, 2013 at 06:18:01PM +0100, Russell King - ARM Linux wrote:
>> > On Sat, Apr 06, 2013 at 03:37:04PM +0300, Kevin Bracey wrote:

[...]

>> Now, with this patch applied, we guarantee that we push out any data
>> that matters from the dying CPU before platform_cpu_kill() is called.
>> That should mean that shmobile can remove that whole cpu_dead thing.
>>
>> I've tested this on OMAP, and it appears to work from a simple test of
>> CPU hotplug.  This patch(set) also kills the cpu_disable() that tegra
>> has which is just a copy of the generic version.
>
> Okay, last version for tonight, with additional comments too, and a
> hole plugged if the powering down is done by the platform via
> cpu_die().
>
>  arch/arm/kernel/smp.c               |   42 +++++++++++++++++++++++++++++++---
>  arch/arm/mach-exynos/hotplug.c      |    1 -
>  arch/arm/mach-highbank/hotplug.c    |    4 ---

Looks like this just landed in -next and it breaks highbank build.
Run-time will also be broken. See the last commit to this file in
final 3.9 which will also conflict with this one. The problem is that
highbank_set_cpu_jump calls outer cache functions which take a
spinlock and pollute the L1 cache. This all goes away once PCSI
support goes in, but for now we need another spot to clear the jump
address or just drop the highbank change.

Rob

[PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop

[Russell King - ARM Linux]

On Wed, May 01, 2013 at 08:06:56AM -0500, Rob Herring wrote:
> On Thu, Apr 18, 2013 at 2:09 PM, Russell King - ARM Linux
> <linux@arm.linux.org.uk> wrote:
> > On Thu, Apr 18, 2013 at 07:25:34PM +0100, Russell King - ARM Linux wrote:
> >> On Thu, Apr 18, 2013 at 06:18:01PM +0100, Russell King - ARM Linux wrote:
> >> > On Sat, Apr 06, 2013 at 03:37:04PM +0300, Kevin Bracey wrote:
> 
> [...]
> 
> >> Now, with this patch applied, we guarantee that we push out any data
> >> that matters from the dying CPU before platform_cpu_kill() is called.
> >> That should mean that shmobile can remove that whole cpu_dead thing.
> >>
> >> I've tested this on OMAP, and it appears to work from a simple test of
> >> CPU hotplug.  This patch(set) also kills the cpu_disable() that tegra
> >> has which is just a copy of the generic version.
> >
> > Okay, last version for tonight, with additional comments too, and a
> > hole plugged if the powering down is done by the platform via
> > cpu_die().
> >
> >  arch/arm/kernel/smp.c               |   42 +++++++++++++++++++++++++++++++---
> >  arch/arm/mach-exynos/hotplug.c      |    1 -
> >  arch/arm/mach-highbank/hotplug.c    |    4 ---
> 
> Looks like this just landed in -next and it breaks highbank build.
> Run-time will also be broken. See the last commit to this file in
> final 3.9 which will also conflict with this one. The problem is that
> highbank_set_cpu_jump calls outer cache functions which take a
> spinlock and pollute the L1 cache. This all goes away once PCSI
> support goes in, but for now we need another spot to clear the jump
> address or just drop the highbank change.

If that's the case then what you currently have is dangerous.  There
is no guarantee that the results of touching those locks will get
flushed out of the L1 cache of the going-down CPU - you _could_ end
up with the result of the lock being flushed out but not the unlock,
which would lead to a system deadlock.

The only thing which has changed as far as highbank is concerned is
that it will now use flush_cache_louis() rather than flush_cache_all()
before calling highbank_set_cpu_jump().

So, I think this has merely uncovered a latent bug in your code. :)