linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq
Date: Sun,  7 Apr 2013 21:25:15 +0200	[thread overview]
Message-ID: <1365362721-3731-6-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1365362721-3731-1-git-send-email-mpa@pengutronix.de>

Add support for non-dma pcm for imx platforms with imx-pcm-fiq support.
Instead of imx-pcm-audio, in this case imx-pcm-fiq-audio device is added
and the SIER flags are set differently.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 sound/soc/fsl/fsl_ssi.c | 70 ++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 58 insertions(+), 12 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 7decbd9..afb5a23 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -120,10 +120,12 @@ struct fsl_ssi_private {
 
 	bool new_binding;
 	bool ssi_on_imx;
+	bool dma;
 	struct clk *clk;
 	struct platform_device *imx_pcm_pdev;
 	struct imx_pcm_dma_params dma_params_tx;
 	struct imx_pcm_dma_params dma_params_rx;
+	struct imx_pcm_fiq_params fiq_params;
 
 	struct {
 		unsigned int rfrc;
@@ -353,7 +355,8 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		 */
 
 		/* Enable the interrupts and DMA requests */
-		write_ssi(SIER_FLAGS, &ssi->sier);
+		if (ssi_private->dma)
+			write_ssi(SIER_FLAGS, &ssi->sier);
 
 		/*
 		 * Set the watermark for transmit FIFI 0 and receive FIFO 0. We
@@ -520,6 +523,18 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
 		return -EINVAL;
 	}
 
+	if (!ssi_private->dma) {
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			write_ssi(CCSR_SSI_SOR_TX_CLR, &ssi->sor);
+			write_ssi(CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN,
+					&ssi->sier);
+		} else {
+			write_ssi(CCSR_SSI_SOR_RX_CLR, &ssi->sor);
+			write_ssi(CCSR_SSI_SIER_RIE | CCSR_SSI_SIER_RFF0_EN,
+					&ssi->sier);
+		}
+	}
+
 	return 0;
 }
 
@@ -680,6 +695,8 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 	       sizeof(fsl_ssi_dai_template));
 	ssi_private->cpu_dai_drv.name = ssi_private->name;
 
+	ssi_private->dma = !of_property_read_bool(np, "fsl,imx-fiq");
+
 	/* Get the addresses and IRQ */
 	ret = of_address_to_resource(np, 0, &res);
 	if (ret) {
@@ -701,12 +718,15 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 		goto error_iomap;
 	}
 
-	/* The 'name' should not have any slashes in it. */
-	ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0, ssi_private->name,
-			  ssi_private);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "could not claim irq %u\n", ssi_private->irq);
-		goto error_irqmap;
+	if (ssi_private->dma) {
+		/* The 'name' should not have any slashes in it. */
+		ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0,
+				ssi_private->name, ssi_private);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "could not claim irq %u\n",
+					ssi_private->irq);
+			goto error_irqmap;
+		}
 	}
 
 	/* Are the RX and the TX clocks locked? */
@@ -789,12 +809,38 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 	}
 
 	if (ssi_private->ssi_on_imx) {
-		ssi_private->imx_pcm_pdev =
-			platform_device_register_simple("imx-pcm-audio",
+		if (!ssi_private->dma) {
+			ssi_private->imx_pcm_pdev = platform_device_alloc(
+							"imx-fiq-pcm-audio",
+							pdev->id);
+			if (!ssi_private->imx_pcm_pdev) {
+				ret = -ENOMEM;
+				goto error_dev;
+			}
+
+			ssi_private->fiq_params.irq = ssi_private->irq;
+			ssi_private->fiq_params.base = ssi_private->ssi;
+			ssi_private->fiq_params.dma_params_rx =
+				&ssi_private->dma_params_rx;
+			ssi_private->fiq_params.dma_params_tx =
+				&ssi_private->dma_params_tx;
+
+			platform_set_drvdata(ssi_private->imx_pcm_pdev,
+					&ssi_private->fiq_params);
+			ret = platform_device_add(ssi_private->imx_pcm_pdev);
+			if (ret) {
+				dev_err(&pdev->dev, "Failed to add imx-fiq-pcm-audio device\n");
+				platform_device_put(ssi_private->imx_pcm_pdev);
+				goto error_dev;
+			}
+		} else {
+			ssi_private->imx_pcm_pdev =
+				platform_device_register_simple("imx-pcm-audio",
 							-1, NULL, 0);
-		if (IS_ERR(ssi_private->imx_pcm_pdev)) {
-			ret = PTR_ERR(ssi_private->imx_pcm_pdev);
-			goto error_dev;
+			if (IS_ERR(ssi_private->imx_pcm_pdev)) {
+				ret = PTR_ERR(ssi_private->imx_pcm_pdev);
+				goto error_dev;
+			}
 		}
 	}
 
-- 
1.8.1.5

  parent reply	other threads:[~2013-04-07 19:25 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-07 19:25 [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support Markus Pargmann
2013-04-07 19:25 ` [PATCH v2 01/11] ASoC: phycore-ac97: Add DT support Markus Pargmann
2013-04-08  2:52   ` Timur Tabi
2013-04-10 11:03     ` Markus Pargmann
2013-04-07 19:25 ` [PATCH v2 02/11] ASoC: imx-pcm-dma: Add support for DMA init by device node Markus Pargmann
2013-04-07 19:25 ` [PATCH v2 03/11] ASoC: imx-pcm-fiq: Introduce pcm-fiq-params Markus Pargmann
2013-04-07 19:25 ` [PATCH v2 04/11] ASoC: fsl-ssi: Add SACNT definitions Markus Pargmann
2013-04-08  0:13   ` Timur Tabi
2013-04-07 19:25 ` Markus Pargmann [this message]
2013-04-08  0:18   ` [PATCH v2 05/11] ASoC: fsl-ssi: Add support for imx-pcm-fiq Timur Tabi
2013-04-14 10:38     ` Markus Pargmann
2013-04-14 13:37       ` Timur Tabi
2013-04-14 14:10         ` Markus Pargmann
2013-04-14 14:53           ` Timur Tabi
2013-04-14 15:20             ` Markus Pargmann
2013-04-14 15:25               ` Timur Tabi
2013-04-14 15:44                 ` Markus Pargmann
2013-04-15 16:15                 ` Mark Brown
2013-04-07 19:25 ` [PATCH v2 06/11] ASoC: fsl-ssi: Setup generic imx dma params Markus Pargmann
2013-04-08  2:50   ` Timur Tabi
2013-04-13 13:52     ` Markus Pargmann
2013-04-07 19:25 ` [PATCH v2 07/11] ARM: imx: Export ac97 reset functions Markus Pargmann
2013-04-07 19:25 ` [PATCH v2 08/11] ASoC: fsl-ssi: imx ac97 support Markus Pargmann
2013-04-08  2:49   ` Timur Tabi
2013-04-10 11:33     ` Markus Pargmann
2013-04-07 19:25 ` [PATCH v2 09/11] ASoC: fsl: Kconfig: Use fsl-ssi for phycore-ac97 Markus Pargmann
2013-04-07 19:25 ` [PATCH v2 10/11] ASoC: fsl: Move fsl-ssi binding doc to sound/ Markus Pargmann
2013-04-08  0:20   ` Timur Tabi
2013-04-07 19:25 ` [PATCH v2 11/11] ASoC: fsl: Update fsl-ssi binding doc Markus Pargmann
2013-04-07 19:39 ` [alsa-devel] [PATCH v2 00/11] ASoC: fsl-ssi: ac97-slave support Lars-Peter Clausen
2013-04-07 20:08   ` Markus Pargmann
2013-04-07 20:35     ` Lars-Peter Clausen
2013-04-13 13:32       ` Markus Pargmann
2013-04-13 13:40         ` Lars-Peter Clausen
2013-04-13 13:55           ` Markus Pargmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1365362721-3731-6-git-send-email-mpa@pengutronix.de \
    --to=mpa@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).