From mboxrd@z Thu Jan 1 00:00:00 1970 From: tixy@linaro.org (Jon Medhurst (Tixy)) Date: Mon, 08 Apr 2013 10:10:11 +0100 Subject: [PATCH v4 15/15] ARM: vexpress: Select multi-cluster SMP operation if required In-Reply-To: References: <1360041732-17936-1-git-send-email-nicolas.pitre@linaro.org> <1360041732-17936-16-git-send-email-nicolas.pitre@linaro.org> <20130405224819.GB14308@quad.lixom.net> Message-ID: <1365412211.3384.16.camel@linaro1.home> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, 2013-04-06 at 10:02 -0400, Nicolas Pitre wrote: > I've amended this patch slightly so to: > > 1) Keep the default .smp = &vexpress_smp_ops and only perform an > override in vexpress_smp_init_ops() when appropriate. This should > remove one potential issue with Xen support that was highlighted > recently. > > 2) Add a mcpm_smp_set_ops() instead of installing mcpm_smp_ops directly > for better abstraction. > > 3) Added a comment about and checked for the CCI node being enabled. > > That results in the patch below. Given those are minor changes, I kept > the existing review tags. > > From: Jon Medhurst > Date: Wed, 30 Jan 2013 09:12:55 +0000 > Subject: [PATCH] ARM: vexpress: Select multi-cluster SMP operation if required > > Signed-off-by: Jon Medhurst > Signed-off-by: Nicolas Pitre > Reviewed-by: Santosh Shilimkar > Acked-by: Pawel Moll > > diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c > index 34f236af09..cc82040877 100644 > --- a/arch/arm/common/mcpm_platsmp.c > +++ b/arch/arm/common/mcpm_platsmp.c > @@ -85,3 +85,8 @@ struct smp_operations __initdata mcpm_smp_ops = { > .cpu_die = mcpm_cpu_die, > #endif > }; > + > +void __init mcpm_smp_set_ops(void) > +{ > + smp_set_ops(&mcpm_smp_ops); > +} > diff --git a/arch/arm/include/asm/mcpm_entry.h b/arch/arm/include/asm/mcpm_entry.h > index 814623e6a1..34dfb86ff5 100644 > --- a/arch/arm/include/asm/mcpm_entry.h > +++ b/arch/arm/include/asm/mcpm_entry.h > @@ -190,5 +190,7 @@ int __mcpm_cluster_state(unsigned int cluster); > int __init mcpm_sync_init( > void (*power_up_setup)(unsigned int affinity_level)); > > +void __init mcpm_smp_set_ops(void); > + > #endif /* ! __ASSEMBLY__ */ > #endif Do the changes to the above mcpm files want to be in a separate patch as it's generic ARM code, not vexpress specific? > diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h > index f134cd4a85..3a761fd76c 100644 > --- a/arch/arm/mach-vexpress/core.h > +++ b/arch/arm/mach-vexpress/core.h > @@ -6,6 +6,8 @@ > > void vexpress_dt_smp_map_io(void); > > +void vexpress_smp_init_ops(void); > + > extern struct smp_operations vexpress_smp_ops; > > extern void vexpress_cpu_die(unsigned int cpu); > diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c > index dc1ace55d5..06317bc714 100644 > --- a/arch/arm/mach-vexpress/platsmp.c > +++ b/arch/arm/mach-vexpress/platsmp.c > @@ -12,9 +12,11 @@ > #include > #include > #include > +#include > #include > #include > > +#include > #include > #include > > @@ -203,3 +205,18 @@ struct smp_operations __initdata vexpress_smp_ops = { > .cpu_die = vexpress_cpu_die, > #endif > }; > + > +void __init vexpress_smp_init_ops(void) > +{ > +#ifdef CONFIG_MCPM > + /* > + * The best way to detect a multi-cluster configuration at the moment > + * is to look for the presence of a CCI in the system. > + * Override the default vexpress_smp_ops if so. > + */ > + struct device_node *node; > + node = of_find_compatible_node(NULL, NULL, "arm,cci"); > + if (node && of_device_is_available(node)) > + mcpm_smp_set_ops(); > +#endif > +} What now sets smp_ops if mcpm_smp_set_ops doesn't get called above? I know there are umpteen versions of the patch "ARM: Enable selection of SMP operations at boot time", but none of them seem to resolve that issue. > diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c > index 915683cb67..16b42c10e0 100644 > --- a/arch/arm/mach-vexpress/v2m.c > +++ b/arch/arm/mach-vexpress/v2m.c > @@ -476,6 +476,7 @@ static const char * const v2m_dt_match[] __initconst = { > DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") > .dt_compat = v2m_dt_match, > .smp = smp_ops(vexpress_smp_ops), > + .smp_init = smp_init_ops(vexpress_smp_init_ops), > .map_io = v2m_dt_map_io, > .init_early = v2m_dt_init_early, > .init_irq = irqchip_init, -- Tixy