* [PATCH v2 0/3] Add DT board setup for LaCie CloudBox
@ 2013-04-08 22:41 Simon Guinot
2013-04-08 22:41 ` [PATCH v2 1/3] ARM: Kirkwood: sort board entries by ASCII-code order Simon Guinot
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Simon Guinot @ 2013-04-08 22:41 UTC (permalink / raw)
To: linux-arm-kernel
This patch series adds DT board setup for the LaCie CloudBox machine.
Note that two patches have been added for this v2. The first,
"ARM: Kirkwood: sort board entries by ASCII-code order" helps to respect
alphabetical order while adding a new board entry. The last,
"ARM: Kirkwood: update Network Space Mini v2 description" could be
useful to differentiate the cloudbox and netspace_v2_mini machines
(both embedded in products named LaCie CloudBox).
Regards,
Simon
Changes for v2:
- Add patch "ARM: Kirkwood: sort board entries by ASCII-code order".
- Add patch "ARM: Kirkwood: update Network Space Mini v2 description".
- Rebase against Jason's branch marvell/mvebu/boards.
- Remove i2c pinctrl declaration (not used).
- For all modified files, respect alphabetical order while inserting cloudbox
entries.
- Enhance patch description to avoid confusion between the two LaCie
products named CloudBox.
Simon Guinot (3):
ARM: Kirkwood: sort board entries by ASCII-code order
ARM: Kirkwood: DT board setup for CloudBox
ARM: Kirkwood: update Network Space Mini v2 description
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/kirkwood-cloudbox.dts | 89 +++++++++
arch/arm/boot/dts/kirkwood-ns2mini.dts | 1 +
arch/arm/configs/kirkwood_defconfig | 51 ++---
arch/arm/mach-kirkwood/Kconfig | 325 ++++++++++++++++---------------
arch/arm/mach-kirkwood/Makefile | 41 ++--
arch/arm/mach-kirkwood/board-dt.c | 14 +-
arch/arm/mach-kirkwood/board-ns2.c | 3 +-
arch/arm/mach-kirkwood/common.h | 6 +
9 files changed, 324 insertions(+), 209 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-cloudbox.dts
--
1.7.10.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/3] ARM: Kirkwood: sort board entries by ASCII-code order
2013-04-08 22:41 [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Simon Guinot
@ 2013-04-08 22:41 ` Simon Guinot
2013-04-08 22:41 ` [PATCH v2 2/3] ARM: Kirkwood: DT board setup for CloudBox Simon Guinot
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Simon Guinot @ 2013-04-08 22:41 UTC (permalink / raw)
To: linux-arm-kernel
This patch sorts board entries in files Kconfig, Makefile and
kirkwood_defconfig by ASCII-code order.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
arch/arm/configs/kirkwood_defconfig | 50 +++---
arch/arm/mach-kirkwood/Kconfig | 314 ++++++++++++++++++-----------------
arch/arm/mach-kirkwood/Makefile | 40 ++---
3 files changed, 203 insertions(+), 201 deletions(-)
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 46d704a..0421d0f 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -10,47 +10,47 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_KIRKWOOD=y
+CONFIG_MACH_D2NET_V2=y
CONFIG_MACH_DB88F6281_BP=y
+CONFIG_MACH_DOCKSTAR=y
+CONFIG_MACH_ESATA_SHEEVAPLUG=y
+CONFIG_MACH_GURUPLUG=y
+CONFIG_MACH_INETSPACE_V2=y
+CONFIG_MACH_MV88F6281GTW_GE=y
+CONFIG_MACH_NET2BIG_V2=y
+CONFIG_MACH_NET5BIG_V2=y
+CONFIG_MACH_NETSPACE_MAX_V2=y
+CONFIG_MACH_NETSPACE_V2=y
+CONFIG_MACH_OPENRD_BASE=y
+CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_OPENRD_ULTIMATE=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
-CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_SHEEVAPLUG=y
-CONFIG_MACH_ESATA_SHEEVAPLUG=y
-CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_DREAMPLUG_DT=y
-CONFIG_MACH_ICONNECT_DT=y
+CONFIG_MACH_T5325=y
+CONFIG_MACH_TS219=y
+CONFIG_MACH_TS41X=y
CONFIG_MACH_DLINK_KIRKWOOD_DT=y
-CONFIG_MACH_IB62X0_DT=y
-CONFIG_MACH_TS219_DT=y
CONFIG_MACH_DOCKSTAR_DT=y
+CONFIG_MACH_DREAMPLUG_DT=y
CONFIG_MACH_GOFLEXNET_DT=y
CONFIG_MACH_GURUPLUG_DT=y
-CONFIG_MACH_LSXL_DT=y
+CONFIG_MACH_IB62X0_DT=y
+CONFIG_MACH_ICONNECT_DT=y
+CONFIG_MACH_INETSPACE_V2_DT=y
CONFIG_MACH_IOMEGA_IX2_200_DT=y
CONFIG_MACH_KM_KIRKWOOD_DT=y
-CONFIG_MACH_INETSPACE_V2_DT=y
+CONFIG_MACH_LSXL_DT=y
CONFIG_MACH_MPLCEC4_DT=y
-CONFIG_MACH_NETSPACE_V2_DT=y
-CONFIG_MACH_NETSPACE_MAX_V2_DT=y
CONFIG_MACH_NETSPACE_LITE_V2_DT=y
+CONFIG_MACH_NETSPACE_MAX_V2_DT=y
CONFIG_MACH_NETSPACE_MINI_V2_DT=y
+CONFIG_MACH_NETSPACE_V2_DT=y
+CONFIG_MACH_NSA310_DT=y
CONFIG_MACH_OPENBLOCKS_A6_DT=y
CONFIG_MACH_READYNAS_DT=y
CONFIG_MACH_TOPKICK_DT=y
-CONFIG_MACH_TS219=y
-CONFIG_MACH_TS41X=y
-CONFIG_MACH_DOCKSTAR=y
-CONFIG_MACH_OPENRD_BASE=y
-CONFIG_MACH_OPENRD_CLIENT=y
-CONFIG_MACH_OPENRD_ULTIMATE=y
-CONFIG_MACH_NETSPACE_V2=y
-CONFIG_MACH_INETSPACE_V2=y
-CONFIG_MACH_NETSPACE_MAX_V2=y
-CONFIG_MACH_D2NET_V2=y
-CONFIG_MACH_NET2BIG_V2=y
-CONFIG_MACH_NET5BIG_V2=y
-CONFIG_MACH_T5325=y
-CONFIG_MACH_NSA310_DT=y
+CONFIG_MACH_TS219_DT=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_PREEMPT=y
CONFIG_AEABI=y
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3fd07eb..938395a 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -2,23 +2,41 @@ if ARCH_KIRKWOOD
menu "Marvell Kirkwood Implementations"
+config MACH_D2NET_V2
+ bool "LaCie d2 Network v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie d2 Network v2 NAS.
+
config MACH_DB88F6281_BP
bool "Marvell DB-88F6281-BP Development Board"
help
Say 'Y' here if you want your kernel to support the
Marvell DB-88F6281-BP Development Board.
-config MACH_RD88F6192_NAS
- bool "Marvell RD-88F6192-NAS Reference Board"
+config MACH_DOCKSTAR
+ bool "Seagate FreeAgent DockStar"
help
Say 'Y' here if you want your kernel to support the
- Marvell RD-88F6192-NAS Reference Board.
+ Seagate FreeAgent DockStar.
-config MACH_RD88F6281
- bool "Marvell RD-88F6281 Reference Board"
+config MACH_ESATA_SHEEVAPLUG
+ bool "Marvell eSATA SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
- Marvell RD-88F6281 Reference Board.
+ Marvell eSATA SheevaPlug Reference Board.
+
+config MACH_GURUPLUG
+ bool "Marvell GuruPlug Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell GuruPlug Reference Board.
+
+config MACH_INETSPACE_V2
+ bool "LaCie Internet Space v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Internet Space v2 NAS.
config MACH_MV88F6281GTW_GE
bool "Marvell 88F6281 GTW GE Board"
@@ -26,23 +44,93 @@ config MACH_MV88F6281GTW_GE
Say 'Y' here if you want your kernel to support the
Marvell 88F6281 GTW GE Board.
+config MACH_NET2BIG_V2
+ bool "LaCie 2Big Network v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 2Big Network v2 NAS.
+
+config MACH_NET5BIG_V2
+ bool "LaCie 5Big Network v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie 5Big Network v2 NAS.
+
+config MACH_NETSPACE_MAX_V2
+ bool "LaCie Network Space Max v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Network Space Max v2 NAS.
+
+config MACH_NETSPACE_V2
+ bool "LaCie Network Space v2 NAS Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ LaCie Network Space v2 NAS.
+
+config MACH_OPENRD
+ bool
+
+config MACH_OPENRD_BASE
+ bool "Marvell OpenRD Base Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Base Board.
+
+config MACH_OPENRD_CLIENT
+ bool "Marvell OpenRD Client Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Client Board.
+
+config MACH_OPENRD_ULTIMATE
+ bool "Marvell OpenRD Ultimate Board"
+ select MACH_OPENRD
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell OpenRD Ultimate Board.
+
+config MACH_RD88F6192_NAS
+ bool "Marvell RD-88F6192-NAS Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-88F6192-NAS Reference Board.
+
+config MACH_RD88F6281
+ bool "Marvell RD-88F6281 Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-88F6281 Reference Board.
+
config MACH_SHEEVAPLUG
bool "Marvell SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
-config MACH_ESATA_SHEEVAPLUG
- bool "Marvell eSATA SheevaPlug Reference Board"
+config MACH_T5325
+ bool "HP t5325 Thin Client"
help
Say 'Y' here if you want your kernel to support the
- Marvell eSATA SheevaPlug Reference Board.
+ HP t5325 Thin Client.
-config MACH_GURUPLUG
- bool "Marvell GuruPlug Reference Board"
+config MACH_TS219
+ bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
- Marvell GuruPlug Reference Board.
+ QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+ TS-219P+ Turbo NAS devices.
+
+config MACH_TS41X
+ bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
+ NAS devices.
+
+comment "Device tree entries"
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
@@ -58,12 +146,20 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
-config MACH_GURUPLUG_DT
- bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
+config MACH_DLINK_KIRKWOOD_DT
+ bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
- Marvell GuruPlug Reference Board (Flattened Device Tree).
+ Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
+ using Flattened Device Tree.
+
+config MACH_DOCKSTAR_DT
+ bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate FreeAgent Dockstar (Flattened Device Tree).
config MACH_DREAMPLUG_DT
bool "Marvell DreamPlug (Flattened Device Tree)"
@@ -72,19 +168,19 @@ config MACH_DREAMPLUG_DT
Say 'Y' here if you want your kernel to support the
Marvell DreamPlug (Flattened Device Tree).
-config MACH_ICONNECT_DT
- bool "Iomega Iconnect (Flattened Device Tree)"
+config MACH_GOFLEXNET_DT
+ bool "Seagate GoFlex Net (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
- Say 'Y' here to enable Iomega Iconnect support.
+ Say 'Y' here if you want your kernel to support the
+ Seagate GoFlex Net (Flattened Device Tree).
-config MACH_DLINK_KIRKWOOD_DT
- bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
+config MACH_GURUPLUG_DT
+ bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
- Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
- using Flattened Device Tree.
+ Marvell GuruPlug Reference Board (Flattened Device Tree).
config MACH_IB62X0_DT
bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
@@ -94,41 +190,18 @@ config MACH_IB62X0_DT
RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
Flattened Device Tree.
-config MACH_TS219_DT
- bool "Device Tree for QNAP TS-11X, TS-21X NAS"
- select ARCH_KIRKWOOD_DT
- select ARM_APPENDED_DTB
- select ARM_ATAG_DTB_COMPAT
- help
- Say 'Y' here if you want your kernel to support the QNAP
- TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
- TS-219P+ Turbo NAS devices using Fattened Device Tree.
- There are two different Device Tree descriptions, depending
- on if the device is based on an if the board uses the MV6281
- or MV6282. If you have the wrong one, the buttons will not
- work.
-
-config MACH_DOCKSTAR_DT
- bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Seagate FreeAgent Dockstar (Flattened Device Tree).
-
-config MACH_GOFLEXNET_DT
- bool "Seagate GoFlex Net (Flattened Device Tree)"
+config MACH_ICONNECT_DT
+ bool "Iomega Iconnect (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
- Say 'Y' here if you want your kernel to support the
- Seagate GoFlex Net (Flattened Device Tree).
+ Say 'Y' here to enable Iomega Iconnect support.
-config MACH_LSXL_DT
- bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
+config MACH_INETSPACE_V2_DT
+ bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
- Say 'Y' here if you want your kernel to support the
- Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
- Flattened Device Tree.
+ Say 'Y' here if you want your kernel to support the LaCie
+ Internet Space v2 NAS, using Flattened Device Tree.
config MACH_IOMEGA_IX2_200_DT
bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
@@ -144,12 +217,13 @@ config MACH_KM_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
-config MACH_INETSPACE_V2_DT
- bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
+config MACH_LSXL_DT
+ bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
- Say 'Y' here if you want your kernel to support the LaCie
- Internet Space v2 NAS, using Flattened Device Tree.
+ Say 'Y' here if you want your kernel to support the
+ Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
+ Flattened Device Tree.
config MACH_MPLCEC4_DT
bool "MPL CEC4 (Flattened Device Tree)"
@@ -158,12 +232,12 @@ config MACH_MPLCEC4_DT
Say 'Y' here if you want your kernel to support the
MPL CEC4 (Flattened Device Tree).
-config MACH_NETSPACE_V2_DT
- bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
+config MACH_NETSPACE_LITE_V2_DT
+ bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
- Network Space v2 NAS, using Flattened Device Tree.
+ Network Space Lite v2 NAS, using Flattened Device Tree.
config MACH_NETSPACE_MAX_V2_DT
bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
@@ -172,13 +246,6 @@ config MACH_NETSPACE_MAX_V2_DT
Say 'Y' here if you want your kernel to support the LaCie
Network Space Max v2 NAS, using Flattened Device Tree.
-config MACH_NETSPACE_LITE_V2_DT
- bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space Lite v2 NAS, using Flattened Device Tree.
-
config MACH_NETSPACE_MINI_V2_DT
bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -187,6 +254,21 @@ config MACH_NETSPACE_MINI_V2_DT
Network Space Mini v2 NAS (aka SafeBox), using Flattened
Device Tree.
+config MACH_NETSPACE_V2_DT
+ bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ Network Space v2 NAS, using Flattened Device Tree.
+
+config MACH_NSA310_DT
+ bool "ZyXEL NSA-310 (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ select ARM_ATAG_DTB_COMPAT
+ help
+ Say 'Y' here if you want your kernel to support the
+ ZyXEL NSA-310 board (Flattened Device Tree).
+
config MACH_OPENBLOCKS_A6_DT
bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -210,99 +292,19 @@ config MACH_TOPKICK_DT
Say 'Y' here if you want your kernel to support the
USI Topkick, using Flattened Device Tree
-config MACH_TS219
- bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
- TS-219P+ Turbo NAS devices.
-
-config MACH_TS41X
- bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
- help
- Say 'Y' here if you want your kernel to support the
- QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
- NAS devices.
-
-config MACH_DOCKSTAR
- bool "Seagate FreeAgent DockStar"
- help
- Say 'Y' here if you want your kernel to support the
- Seagate FreeAgent DockStar.
-
-config MACH_OPENRD
- bool
-
-config MACH_OPENRD_BASE
- bool "Marvell OpenRD Base Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Base Board.
-
-config MACH_OPENRD_CLIENT
- bool "Marvell OpenRD Client Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Client Board.
-
-config MACH_OPENRD_ULTIMATE
- bool "Marvell OpenRD Ultimate Board"
- select MACH_OPENRD
- help
- Say 'Y' here if you want your kernel to support the
- Marvell OpenRD Ultimate Board.
-
-config MACH_NETSPACE_V2
- bool "LaCie Network Space v2 NAS Board"
- help
- Say 'Y' here if you want your kernel to support the
- LaCie Network Space v2 NAS.
-
-config MACH_INETSPACE_V2
- bool "LaCie Internet Space v2 NAS Board"
- help
- Say 'Y' here if you want your kernel to support the
- LaCie Internet Space v2 NAS.
-
-config MACH_NETSPACE_MAX_V2
- bool "LaCie Network Space Max v2 NAS Board"
- help
- Say 'Y' here if you want your kernel to support the
- LaCie Network Space Max v2 NAS.
-
-config MACH_D2NET_V2
- bool "LaCie d2 Network v2 NAS Board"
- help
- Say 'Y' here if you want your kernel to support the
- LaCie d2 Network v2 NAS.
-
-config MACH_NET2BIG_V2
- bool "LaCie 2Big Network v2 NAS Board"
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 2Big Network v2 NAS.
-
-config MACH_NET5BIG_V2
- bool "LaCie 5Big Network v2 NAS Board"
- help
- Say 'Y' here if you want your kernel to support the
- LaCie 5Big Network v2 NAS.
-
-config MACH_T5325
- bool "HP t5325 Thin Client"
- help
- Say 'Y' here if you want your kernel to support the
- HP t5325 Thin Client.
-
-config MACH_NSA310_DT
- bool "ZyXEL NSA-310 (Flattened Device Tree)"
+config MACH_TS219_DT
+ bool "Device Tree for QNAP TS-11X, TS-21X NAS"
select ARCH_KIRKWOOD_DT
+ select ARM_APPENDED_DTB
select ARM_ATAG_DTB_COMPAT
help
- Say 'Y' here if you want your kernel to support the
- ZyXEL NSA-310 board (Flattened Device Tree).
+ Say 'Y' here if you want your kernel to support the QNAP
+ TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+ TS-219P+ Turbo NAS devices using Fattened Device Tree.
+ There are two different Device Tree descriptions, depending
+ on if the device is based on an if the board uses the MV6281
+ or MV6282. If you have the wrong one, the buttons will not
+ work.
endmenu
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index ff0f3cb..5f1285d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,43 +1,43 @@
obj-y += common.o addr-map.o irq.o pcie.o mpp.o
+obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
-obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
-obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
-obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
+obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
-obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
-obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
-obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
+obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
+obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
+obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
-obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
-obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o
-obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
-obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
-obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
+obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
-obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
+obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o
+obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
+obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
+obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
-obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o
-obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o
obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o
obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o
obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o
+obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/3] ARM: Kirkwood: DT board setup for CloudBox
2013-04-08 22:41 [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Simon Guinot
2013-04-08 22:41 ` [PATCH v2 1/3] ARM: Kirkwood: sort board entries by ASCII-code order Simon Guinot
@ 2013-04-08 22:41 ` Simon Guinot
2013-04-08 22:41 ` [PATCH v2 3/3] ARM: Kirkwood: update Network Space Mini v2 description Simon Guinot
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Simon Guinot @ 2013-04-08 22:41 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox
is a low cost NAS based on the Network Space v2.
Chipset list:
- CPU MARVELL 88F6702 1Ghz
- SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz
- 1 Ethernet Gigabit port (PHY MARVELL 88E1318)
- SPI flash, NOR 512KB
- 1 push button
- 2 LEDs (red and blue)
There is no EEPROM and no USB ports embedded.
Note that this board must not be confused with the Network Space Mini v2
which is embedded in a previous LaCie product also named CloudBox.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
Changes for v2:
- Rebase against Jason's branch marvell/mvebu/boards.
- Remove i2c pinctrl declaration (not used).
- For all modified files, respect alphabetical order while inserting cloudbox
entries.
- Enhance patch description to avoid confusion between the two LaCie
products named CloudBox.
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/kirkwood-cloudbox.dts | 89 +++++++++++++++++++++++++++++++
arch/arm/configs/kirkwood_defconfig | 1 +
arch/arm/mach-kirkwood/Kconfig | 7 +++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dt.c | 14 ++---
arch/arm/mach-kirkwood/board-ns2.c | 3 +-
arch/arm/mach-kirkwood/common.h | 6 +++
8 files changed, 116 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-cloudbox.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 125211d..c56f20f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -51,7 +51,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+ kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
new file mode 100644
index 0000000..5f21d4e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -0,0 +1,89 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+ model = "LaCie CloudBox";
+ compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ pinctrl-0 = < &pmx_spi &pmx_uart0
+ &pmx_cloudbox_sata0 >;
+ pinctrl-names = "default";
+
+ pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
+ marvell,pins = "mpp15";
+ marvell,function = "sata0";
+ };
+ };
+
+ serial at 12000 {
+ clock-frequency = <166666667>;
+ status = "okay";
+ };
+
+ sata at 80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+
+ spi at 10600 {
+ status = "okay";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l4005a";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition at 0 {
+ reg = <0x0 0x80000>;
+ label = "u-boot";
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button at 1 {
+ label = "Power push button";
+ linux,code = <116>;
+ gpios = <&gpio0 16 1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ red-fail {
+ label = "cloudbox:red:fail";
+ gpios = <&gpio0 14 0>;
+ };
+ blue-sata {
+ label = "cloudbox:blue:sata";
+ gpios = <&gpio0 15 0>;
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 17 0>;
+ };
+};
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 0421d0f..7205a7a 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -30,6 +30,7 @@ CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_T5325=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
+CONFIG_MACH_CLOUDBOX_DT=y
CONFIG_MACH_DLINK_KIRKWOOD_DT=y
CONFIG_MACH_DOCKSTAR_DT=y
CONFIG_MACH_DREAMPLUG_DT=y
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 938395a..45ab2f5 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -146,6 +146,13 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
+config MACH_CLOUDBOX_DT
+ bool "LaCie CloudBox NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ CloudBox NAS, using Flattened Device Tree.
+
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 5f1285d..cdbca32 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
+obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index e5a3cfe..7904758 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -139,11 +139,12 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
- if (of_machine_is_compatible("lacie,inetspace_v2") ||
- of_machine_is_compatible("lacie,netspace_v2") ||
- of_machine_is_compatible("lacie,netspace_max_v2") ||
+ if (of_machine_is_compatible("lacie,cloudbox") ||
+ of_machine_is_compatible("lacie,inetspace_v2") ||
of_machine_is_compatible("lacie,netspace_lite_v2") ||
- of_machine_is_compatible("lacie,netspace_mini_v2"))
+ of_machine_is_compatible("lacie,netspace_max_v2") ||
+ of_machine_is_compatible("lacie,netspace_mini_v2") ||
+ of_machine_is_compatible("lacie,netspace_v2"))
ns2_init();
if (of_machine_is_compatible("mpl,cec4"))
@@ -174,11 +175,12 @@ static const char * const kirkwood_dt_board_compat[] = {
"buffalo,lsxl",
"iom,ix2-200",
"keymile,km_kirkwood",
+ "lacie,cloudbox",
"lacie,inetspace_v2",
- "lacie,netspace_max_v2",
- "lacie,netspace_v2",
"lacie,netspace_lite_v2",
+ "lacie,netspace_max_v2",
"lacie,netspace_mini_v2",
+ "lacie,netspace_v2",
"mpl,cec4",
"netgear,readynas-duo-v2",
"plathome,openblocks-a6",
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index f2ea3b7..f8f6605 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -27,7 +27,8 @@ void __init ns2_init(void)
/*
* Basic setup. Needs to be called early.
*/
- if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
+ if (of_machine_is_compatible("lacie,cloudbox") ||
+ of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&ns2_ge00_data);
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 7ee8670..3147be2 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -153,6 +153,12 @@ void usi_topkick_init(void);
static inline void usi_topkick_init(void) {};
#endif
+#ifdef CONFIG_MACH_CLOUDBOX_DT
+void cloudbox_init(void);
+#else
+static inline void cloudbox_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/3] ARM: Kirkwood: update Network Space Mini v2 description
2013-04-08 22:41 [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Simon Guinot
2013-04-08 22:41 ` [PATCH v2 1/3] ARM: Kirkwood: sort board entries by ASCII-code order Simon Guinot
2013-04-08 22:41 ` [PATCH v2 2/3] ARM: Kirkwood: DT board setup for CloudBox Simon Guinot
@ 2013-04-08 22:41 ` Simon Guinot
2013-04-09 5:19 ` [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Andrew Lunn
2013-04-10 18:21 ` Jason Cooper
4 siblings, 0 replies; 6+ messages in thread
From: Simon Guinot @ 2013-04-08 22:41 UTC (permalink / raw)
To: linux-arm-kernel
LaCie has released two products under the CloudBox name. The
netspace_mini_v2 machine is embedded in the oldest product. The cloudbox
machine is embedded in the newest one. In order to allow a CloudBox user
to select the right machine support, this patch adds some informations
to the netspace_mini_v2 Kconfig description. A comment is also added to
the dts file.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
arch/arm/boot/dts/kirkwood-ns2mini.dts | 1 +
arch/arm/mach-kirkwood/Kconfig | 8 ++++++--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index b79f5eb..adab1ab 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -3,6 +3,7 @@
/include/ "kirkwood-ns2-common.dtsi"
/ {
+ /* This machine is embedded in the first LaCie CloudBox product. */
model = "LaCie Network Space Mini v2";
compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 45ab2f5..7509a89 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -258,8 +258,12 @@ config MACH_NETSPACE_MINI_V2_DT
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
- Network Space Mini v2 NAS (aka SafeBox), using Flattened
- Device Tree.
+ Network Space Mini v2 NAS using Flattened Device Tree.
+
+ This board is embedded in a product named CloudBox, which
+ provides automatic backup on a 100GB cloud storage. This
+ should not confused with a more recent LaCie NAS also named
+ CloudBox. For this last, the disk capacity is 1TB or above.
config MACH_NETSPACE_V2_DT
bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 0/3] Add DT board setup for LaCie CloudBox
2013-04-08 22:41 [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Simon Guinot
` (2 preceding siblings ...)
2013-04-08 22:41 ` [PATCH v2 3/3] ARM: Kirkwood: update Network Space Mini v2 description Simon Guinot
@ 2013-04-09 5:19 ` Andrew Lunn
2013-04-10 18:21 ` Jason Cooper
4 siblings, 0 replies; 6+ messages in thread
From: Andrew Lunn @ 2013-04-09 5:19 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Apr 09, 2013 at 12:41:26AM +0200, Simon Guinot wrote:
> This patch series adds DT board setup for the LaCie CloudBox machine.
> Note that two patches have been added for this v2. The first,
> "ARM: Kirkwood: sort board entries by ASCII-code order" helps to respect
> alphabetical order while adding a new board entry. The last,
> "ARM: Kirkwood: update Network Space Mini v2 description" could be
> useful to differentiate the cloudbox and netspace_v2_mini machines
> (both embedded in products named LaCie CloudBox).
>
> Regards,
Hi Simon,
Looks good.
Acked-by: Andrew Lunn <andrew@lunn.ch>
>
> Simon
>
> Changes for v2:
> - Add patch "ARM: Kirkwood: sort board entries by ASCII-code order".
> - Add patch "ARM: Kirkwood: update Network Space Mini v2 description".
> - Rebase against Jason's branch marvell/mvebu/boards.
> - Remove i2c pinctrl declaration (not used).
> - For all modified files, respect alphabetical order while inserting cloudbox
> entries.
> - Enhance patch description to avoid confusion between the two LaCie
> products named CloudBox.
>
> Simon Guinot (3):
> ARM: Kirkwood: sort board entries by ASCII-code order
> ARM: Kirkwood: DT board setup for CloudBox
> ARM: Kirkwood: update Network Space Mini v2 description
>
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/kirkwood-cloudbox.dts | 89 +++++++++
> arch/arm/boot/dts/kirkwood-ns2mini.dts | 1 +
> arch/arm/configs/kirkwood_defconfig | 51 ++---
> arch/arm/mach-kirkwood/Kconfig | 325 ++++++++++++++++---------------
> arch/arm/mach-kirkwood/Makefile | 41 ++--
> arch/arm/mach-kirkwood/board-dt.c | 14 +-
> arch/arm/mach-kirkwood/board-ns2.c | 3 +-
> arch/arm/mach-kirkwood/common.h | 6 +
> 9 files changed, 324 insertions(+), 209 deletions(-)
> create mode 100644 arch/arm/boot/dts/kirkwood-cloudbox.dts
>
> --
> 1.7.10.4
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 0/3] Add DT board setup for LaCie CloudBox
2013-04-08 22:41 [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Simon Guinot
` (3 preceding siblings ...)
2013-04-09 5:19 ` [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Andrew Lunn
@ 2013-04-10 18:21 ` Jason Cooper
4 siblings, 0 replies; 6+ messages in thread
From: Jason Cooper @ 2013-04-10 18:21 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Apr 09, 2013 at 12:41:26AM +0200, Simon Guinot wrote:
> This patch series adds DT board setup for the LaCie CloudBox machine.
> Note that two patches have been added for this v2. The first,
> "ARM: Kirkwood: sort board entries by ASCII-code order" helps to respect
> alphabetical order while adding a new board entry. The last,
> "ARM: Kirkwood: update Network Space Mini v2 description" could be
> useful to differentiate the cloudbox and netspace_v2_mini machines
> (both embedded in products named LaCie CloudBox).
>
> Regards,
>
> Simon
>
> Changes for v2:
> - Add patch "ARM: Kirkwood: sort board entries by ASCII-code order".
> - Add patch "ARM: Kirkwood: update Network Space Mini v2 description".
> - Rebase against Jason's branch marvell/mvebu/boards.
> - Remove i2c pinctrl declaration (not used).
> - For all modified files, respect alphabetical order while inserting cloudbox
> entries.
> - Enhance patch description to avoid confusion between the two LaCie
> products named CloudBox.
>
> Simon Guinot (3):
> ARM: Kirkwood: sort board entries by ASCII-code order
> ARM: Kirkwood: DT board setup for CloudBox
> ARM: Kirkwood: update Network Space Mini v2 description
>
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/kirkwood-cloudbox.dts | 89 +++++++++
> arch/arm/boot/dts/kirkwood-ns2mini.dts | 1 +
> arch/arm/configs/kirkwood_defconfig | 51 ++---
> arch/arm/mach-kirkwood/Kconfig | 325 ++++++++++++++++---------------
> arch/arm/mach-kirkwood/Makefile | 41 ++--
> arch/arm/mach-kirkwood/board-dt.c | 14 +-
> arch/arm/mach-kirkwood/board-ns2.c | 3 +-
> arch/arm/mach-kirkwood/common.h | 6 +
> 9 files changed, 324 insertions(+), 209 deletions(-)
> create mode 100644 arch/arm/boot/dts/kirkwood-cloudbox.dts
Whole series applied to mvebu/boards
thx,
Jason.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-04-10 18:21 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-08 22:41 [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Simon Guinot
2013-04-08 22:41 ` [PATCH v2 1/3] ARM: Kirkwood: sort board entries by ASCII-code order Simon Guinot
2013-04-08 22:41 ` [PATCH v2 2/3] ARM: Kirkwood: DT board setup for CloudBox Simon Guinot
2013-04-08 22:41 ` [PATCH v2 3/3] ARM: Kirkwood: update Network Space Mini v2 description Simon Guinot
2013-04-09 5:19 ` [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Andrew Lunn
2013-04-10 18:21 ` Jason Cooper
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).