From: simon.guinot@sequanux.org (Simon Guinot)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] ARM: Kirkwood: DT board setup for CloudBox
Date: Tue, 9 Apr 2013 00:41:28 +0200 [thread overview]
Message-ID: <1365460889-22965-3-git-send-email-simon.guinot@sequanux.org> (raw)
In-Reply-To: <1365460889-22965-1-git-send-email-simon.guinot@sequanux.org>
This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox
is a low cost NAS based on the Network Space v2.
Chipset list:
- CPU MARVELL 88F6702 1Ghz
- SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz
- 1 Ethernet Gigabit port (PHY MARVELL 88E1318)
- SPI flash, NOR 512KB
- 1 push button
- 2 LEDs (red and blue)
There is no EEPROM and no USB ports embedded.
Note that this board must not be confused with the Network Space Mini v2
which is embedded in a previous LaCie product also named CloudBox.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
Changes for v2:
- Rebase against Jason's branch marvell/mvebu/boards.
- Remove i2c pinctrl declaration (not used).
- For all modified files, respect alphabetical order while inserting cloudbox
entries.
- Enhance patch description to avoid confusion between the two LaCie
products named CloudBox.
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/kirkwood-cloudbox.dts | 89 +++++++++++++++++++++++++++++++
arch/arm/configs/kirkwood_defconfig | 1 +
arch/arm/mach-kirkwood/Kconfig | 7 +++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dt.c | 14 ++---
arch/arm/mach-kirkwood/board-ns2.c | 3 +-
arch/arm/mach-kirkwood/common.h | 6 +++
8 files changed, 116 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-cloudbox.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 125211d..c56f20f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -51,7 +51,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+ kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
new file mode 100644
index 0000000..5f21d4e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -0,0 +1,89 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+ model = "LaCie CloudBox";
+ compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ pinctrl-0 = < &pmx_spi &pmx_uart0
+ &pmx_cloudbox_sata0 >;
+ pinctrl-names = "default";
+
+ pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
+ marvell,pins = "mpp15";
+ marvell,function = "sata0";
+ };
+ };
+
+ serial at 12000 {
+ clock-frequency = <166666667>;
+ status = "okay";
+ };
+
+ sata at 80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+
+ spi at 10600 {
+ status = "okay";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l4005a";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition at 0 {
+ reg = <0x0 0x80000>;
+ label = "u-boot";
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button at 1 {
+ label = "Power push button";
+ linux,code = <116>;
+ gpios = <&gpio0 16 1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ red-fail {
+ label = "cloudbox:red:fail";
+ gpios = <&gpio0 14 0>;
+ };
+ blue-sata {
+ label = "cloudbox:blue:sata";
+ gpios = <&gpio0 15 0>;
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 17 0>;
+ };
+};
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 0421d0f..7205a7a 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -30,6 +30,7 @@ CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_T5325=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
+CONFIG_MACH_CLOUDBOX_DT=y
CONFIG_MACH_DLINK_KIRKWOOD_DT=y
CONFIG_MACH_DOCKSTAR_DT=y
CONFIG_MACH_DREAMPLUG_DT=y
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 938395a..45ab2f5 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -146,6 +146,13 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
+config MACH_CLOUDBOX_DT
+ bool "LaCie CloudBox NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ CloudBox NAS, using Flattened Device Tree.
+
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 5f1285d..cdbca32 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
+obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index e5a3cfe..7904758 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -139,11 +139,12 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
- if (of_machine_is_compatible("lacie,inetspace_v2") ||
- of_machine_is_compatible("lacie,netspace_v2") ||
- of_machine_is_compatible("lacie,netspace_max_v2") ||
+ if (of_machine_is_compatible("lacie,cloudbox") ||
+ of_machine_is_compatible("lacie,inetspace_v2") ||
of_machine_is_compatible("lacie,netspace_lite_v2") ||
- of_machine_is_compatible("lacie,netspace_mini_v2"))
+ of_machine_is_compatible("lacie,netspace_max_v2") ||
+ of_machine_is_compatible("lacie,netspace_mini_v2") ||
+ of_machine_is_compatible("lacie,netspace_v2"))
ns2_init();
if (of_machine_is_compatible("mpl,cec4"))
@@ -174,11 +175,12 @@ static const char * const kirkwood_dt_board_compat[] = {
"buffalo,lsxl",
"iom,ix2-200",
"keymile,km_kirkwood",
+ "lacie,cloudbox",
"lacie,inetspace_v2",
- "lacie,netspace_max_v2",
- "lacie,netspace_v2",
"lacie,netspace_lite_v2",
+ "lacie,netspace_max_v2",
"lacie,netspace_mini_v2",
+ "lacie,netspace_v2",
"mpl,cec4",
"netgear,readynas-duo-v2",
"plathome,openblocks-a6",
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index f2ea3b7..f8f6605 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -27,7 +27,8 @@ void __init ns2_init(void)
/*
* Basic setup. Needs to be called early.
*/
- if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
+ if (of_machine_is_compatible("lacie,cloudbox") ||
+ of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&ns2_ge00_data);
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 7ee8670..3147be2 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -153,6 +153,12 @@ void usi_topkick_init(void);
static inline void usi_topkick_init(void) {};
#endif
+#ifdef CONFIG_MACH_CLOUDBOX_DT
+void cloudbox_init(void);
+#else
+static inline void cloudbox_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
--
1.7.10.4
next prev parent reply other threads:[~2013-04-08 22:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-08 22:41 [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Simon Guinot
2013-04-08 22:41 ` [PATCH v2 1/3] ARM: Kirkwood: sort board entries by ASCII-code order Simon Guinot
2013-04-08 22:41 ` Simon Guinot [this message]
2013-04-08 22:41 ` [PATCH v2 3/3] ARM: Kirkwood: update Network Space Mini v2 description Simon Guinot
2013-04-09 5:19 ` [PATCH v2 0/3] Add DT board setup for LaCie CloudBox Andrew Lunn
2013-04-10 18:21 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365460889-22965-3-git-send-email-simon.guinot@sequanux.org \
--to=simon.guinot@sequanux.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).