From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Sat, 13 Apr 2013 16:56:41 +0200 Subject: [PATCHv3 06/10] arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface In-Reply-To: <1365865005-26653-1-git-send-email-thomas.petazzoni@free-electrons.com> References: <1365865005-26653-1-git-send-email-thomas.petazzoni@free-electrons.com> Message-ID: <1365865005-26653-7-git-send-email-thomas.petazzoni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that the PCIe mvebu driver is usable on Kirkwood, use it instead of the legacy PCIe code, since it allows to describe the PCIe interfaces in the Device Tree. Signed-off-by: Thomas Petazzoni --- arch/arm/boot/dts/kirkwood-mplcec4.dts | 8 ++++++++ arch/arm/mach-kirkwood/board-mplcec4.c | 1 - 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 662dfd8..080f28e 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -140,6 +140,14 @@ cd-gpios = <&gpio1 15 0>; /* No WP GPIO */ }; + + pcie-controller { + status = "okay"; + + pcie at 1,0 { + status = "okay"; + }; + }; }; gpio-leds { diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c index 7d6dc66..938712e 100644 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -29,7 +29,6 @@ void __init mplcec4_init(void) */ kirkwood_ge00_init(&mplcec4_ge00_data); kirkwood_ge01_init(&mplcec4_ge01_data); - kirkwood_pcie_init(KW_PCIE0); } -- 1.7.9.5