From: haojian.zhuang@linaro.org (Haojian Zhuang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: debug: support debug ll on hisilicon soc
Date: Fri, 19 Apr 2013 18:49:23 +0800 [thread overview]
Message-ID: <1366368567-17322-1-git-send-email-haojian.zhuang@linaro.org> (raw)
Support UART0 debug ll on hisilicon Hi3620 SoC.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/Kconfig.debug | 15 +++++++++++++++
arch/arm/include/debug/hisilicon.S | 30 ++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
create mode 100644 arch/arm/include/debug/hisilicon.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index acdddda..fd658db 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -240,6 +240,20 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX6Q.
+ config DEBUG_HI3620_UART
+ bool "Hisilicon HI3620 Debug UART"
+ depends on ARCH_HI3xxx
+ help
+ Say Y here if you want kernel low-level debugging support
+ on HI3620 UART.
+
+ config DEBUG_HI3716_UART
+ bool "Hisilicon Hi3716 Debug UART"
+ depends on ARCH_HI3xxx
+ help
+ Say Y here if you want kernel low-level debugging support
+ on HI3716 UART.
+
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
depends on ARCH_MMP
@@ -589,6 +603,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
+ default "debug/hisilicon.S" if DEBUG_HI3620_UART || DEBUG_HI3716_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
diff --git a/arch/arm/include/debug/hisilicon.S b/arch/arm/include/debug/hisilicon.S
new file mode 100644
index 0000000..47ad019
--- /dev/null
+++ b/arch/arm/include/debug/hisilicon.S
@@ -0,0 +1,30 @@
+/*
+ * Early serial output macro for Hisilicon SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Technologies Co., Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#if defined(CONFIG_DEBUG_HI3620_UART)
+#define HS_UART_PHYS_BASE 0xfcb00000
+#define HS_UART_VIRT_BASE 0xfeb00000
+#elif defined(CONFIG_DEBUG_HI3716_UART)
+#define HS_UART_PHYS_BASE 0xf8b00000
+#define HS_UART_VIRT_BASE 0xfeb00000
+#endif
+
+#if defined(CONFIG_DEBUG_HI3620_UART) || defined(CONFIG_DEBUG_HI3716_UART)
+ .macro addruart,rp,rv,tmp
+ ldr \rp, =HS_UART_PHYS_BASE
+ ldr \rv, =HS_UART_VIRT_BASE
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
+
+#endif
--
1.7.10.4
next reply other threads:[~2013-04-19 10:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-19 10:49 Haojian Zhuang [this message]
2013-04-19 10:49 ` [PATCH 2/5] clk: hi3xxx: add clock support Haojian Zhuang
2013-05-13 19:47 ` Mike Turquette
2013-05-14 1:30 ` Haojian Zhuang
2013-05-14 16:22 ` Mike Turquette
2013-04-19 10:49 ` [PATCH 3/5] ARM: hi3xxx: add board support with device tree Haojian Zhuang
2013-04-19 10:49 ` [PATCH 4/5] ARM: hi3xxx: enable hi4511 " Haojian Zhuang
2013-04-19 10:49 ` [PATCH 5/5] ARM: config: append arch hi3xxx into multi defconfig Haojian Zhuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366368567-17322-1-git-send-email-haojian.zhuang@linaro.org \
--to=haojian.zhuang@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).