From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: dts: Add MC13783 support for i.MX27 Phytec PCM038 module
Date: Wed, 1 May 2013 14:46:59 +0400 [thread overview]
Message-ID: <1367405219-19078-3-git-send-email-shc_work@mail.ru> (raw)
In-Reply-To: <1367405219-19078-1-git-send-email-shc_work@mail.ru>
Added MC13783 node to imx27-phytec-phycore DT file.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boot/dts/imx27-phytec-phycore.dts | 92 ++++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index b0e9372..5c4fea9 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -76,6 +76,98 @@
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 28 0>;
status = "okay";
+
+ pmic: mc13783 at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13783";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <23 0x4>;
+ fsl,mc13xxx-uses-adc;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sw1b_reg: sw1b {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sw2a_reg: sw2a {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sw2b_reg: sw2b {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vaudio_reg: vaudio {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ violo_reg: violo {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ viohi_reg: viohi {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vgen_reg: vgen {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vrf1_reg: vrf1 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vrf2_reg: vrf2 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vmmc1_reg: vmmc1 {
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ gpo1_reg: gpo1 {
+ };
+ pwgt1spi_reg: pwgt1spi {
+ };
+ };
+ };
};
&nfc {
--
1.8.1.5
next prev parent reply other threads:[~2013-05-01 10:46 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-01 10:46 [PATCH 1/3] ARM: dts: Add aliases for i.MX27 SPI controller Alexander Shiyan
2013-05-01 10:46 ` [PATCH 2/3] ARM: dts: Add SPI support for i.MX27 Phytec PCM038 module Alexander Shiyan
2013-05-01 10:46 ` Alexander Shiyan [this message]
2013-05-01 15:36 ` [PATCH 3/3] ARM: dts: Add MC13783 " Sascha Hauer
2013-05-01 15:40 ` Re[2]: " Alexander Shiyan
2013-05-01 19:15 ` Sascha Hauer
2013-05-02 4:09 ` Re[2]: " Alexander Shiyan
2013-05-02 4:13 ` Re[3]: " Alexander Shiyan
2013-05-02 3:12 ` [PATCH 1/3] ARM: dts: Add aliases for i.MX27 SPI controller Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367405219-19078-3-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).