From mboxrd@z Thu Jan  1 00:00:00 1970
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
Date: Fri,  3 May 2013 01:48:39 +0200
Subject: [PATCH v2 5/5] ARM: dove: add DT nodes for irqchip conversion
In-Reply-To: <1367538519-23940-1-git-send-email-sebastian.hesselbarth@gmail.com>
References: <1367519104-19677-1-git-send-email-sebastian.hesselbarth@gmail.com>
 <1367538519-23940-1-git-send-email-sebastian.hesselbarth@gmail.com>
Message-ID: <1367538519-23940-6-git-send-email-sebastian.hesselbarth@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

This patch adds required device tree nodes for irqchip conversion
on Dove. The nodes are named and layed out to allow seamless migration
to true DT enabled drivers as soon as they are available.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Changelog:
v1->v2:
- merge DT changes into this patch (Suggested by Jason Cooper)

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Jean-Francois Moine <moinejf@free.fr>
Cc: devicetree-discuss at lists.ozlabs.org
Cc: linux-doc at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/dove.dtsi |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 6cab468..afb719a 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -30,11 +30,18 @@
 			marvell,tauros2-cache-features = <0>;
 		};
 
+		timer: timer {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupts = <0>;
+			clocks = <&core_clk 0>;
+		};
+
 		intc: interrupt-controller {
 			compatible = "marvell,orion-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			reg = <0x20204 0x04>, <0x20214 0x04>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
 		};
 
 		core_clk: core-clocks at d0214 {
@@ -202,6 +209,13 @@
 			status = "disabled";
 		};
 
+		gbe: ethernet-controller {
+			compatible = "marvell,mv643xx-eth-block";
+			reg = <0x72000 0x4000>;
+			interrupts = <29>, <30>;
+			status = "disabled";
+		};
+
 		rtc at d8500 {
 			compatible = "marvell,orion-rtc";
 			reg = <0xd8500 0x20>;
-- 
1.7.10.4