linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jagarwal@nvidia.com (Jay Agarwal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: dts: tegra: Correct PCIe entry
Date: Wed, 8 May 2013 16:27:39 +0530	[thread overview]
Message-ID: <1368010660-31465-3-git-send-email-jagarwal@nvidia.com> (raw)
In-Reply-To: <1368010660-31465-1-git-send-email-jagarwal@nvidia.com>

- Add interrupt-names property
- Correct downstream I/O size
- Correct cml clock name for Tegra30
- Patch is based on remotes/gitorious_thierryreding_linux/tegra/next
- and should be applied on top of this.

Signed-off-by: Jay Agarwal <jagarwal@nvidia.com>
---
 arch/arm/boot/dts/tegra30.dtsi |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 5a270ff..289ef93 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -124,7 +124,7 @@
 		reg-names = "pads", "afi", "cs";
 		interrupts = <0 98 0x04   /* controller interrupt */
 		              0 99 0x04>; /* MSI interrupt */
-
+		interrupt-names = "intr", "msi";
 		bus-range = <0x00 0xff>;
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -132,13 +132,13 @@
 		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
 			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
 			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
-			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
+			  0x81000000 0 0          0x02000000 0 0x00100000   /* downstream I/O */
 			  0x82000000 0 0x20000000 0x20000000 0 0x10000000   /* non-prefetchable memory */
 			  0xc2000000 0 0x30000000 0x30000000 0 0x10000000>; /* prefetchable memory */
 
 		clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
 			 <&tegra_car 118>, <&tegra_car 215>;
-		clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
+		clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml0";
 		status = "disabled";
 
 		pci at 1,0 {
-- 
1.7.0.4

  parent reply	other threads:[~2013-05-08 10:57 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-08 10:57 [PATCH 1/4] ARM: tegra30: clocks: Fix pciex clock registration Jay Agarwal
2013-05-08 10:57 ` [PATCH 2/4] ARM: tegra: pcie: Add tegra3 support Jay Agarwal
2013-05-08 16:53   ` Stephen Warren
2013-05-08 10:57 ` Jay Agarwal [this message]
2013-05-08 16:56   ` [PATCH 3/4] ARM: dts: tegra: Correct PCIe entry Stephen Warren
2013-05-08 10:57 ` [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu Jay Agarwal
2013-05-08 17:04   ` Stephen Warren
2013-05-08 17:53     ` Stephen Warren
2013-05-15 17:28     ` Jay Agarwal
2013-05-17 16:51       ` Jay Agarwal
2013-05-17 19:48         ` Stephen Warren
2013-05-29 10:10         ` Jay Agarwal
2013-05-29 15:35           ` Stephen Warren
2013-05-30 17:37             ` Jay Agarwal
2013-05-30 18:04               ` Stephen Warren
     [not found]                 ` <C79B248886DD134989C8FF6B096A91AB91B616BEAD@BGMAIL01.nvidia.com>
     [not found]                   ` <51A8DE3A.6080503@wwwdotorg.org>
     [not found]                     ` <C79B248886DD134989C8FF6B096A91AB91B616BEB3@BGMAIL01.nvidia.com>
     [not found]                       ` <C79B248886DD134989C8FF6B096A91AB91B616BEB4@BGMAIL01.nvidia.com>
     [not found]                         ` <C79B248886DD134989C8FF6B096A91AB91B616BEB5@BGMAIL01.nvidia.com>
     [not found]                           ` <C79B248886DD134989C8FF6B096A91AB91B616BEBE@BGMAIL01.nvidia.com>
     [not found]                             ` <C79B248886DD134989C8FF6B096A91AB91B616BEC1@BGMAIL01.nvidia.com>
2013-06-04 17:17                               ` FW: " Jay Agarwal
2013-05-08 16:36 ` [PATCH 1/4] ARM: tegra30: clocks: Fix pciex clock registration Stephen Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1368010660-31465-3-git-send-email-jagarwal@nvidia.com \
    --to=jagarwal@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).