From mboxrd@z Thu Jan 1 00:00:00 1970 From: james.hogan@imgtec.com (James Hogan) Date: Fri, 10 May 2013 16:02:02 +0100 Subject: [PATCH RFC 0/2] clk: add metag specific gate/mux clocks Message-ID: <1368198127-1295-1-git-send-email-james.hogan@imgtec.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This adds a metag architecture specific clk-gate and clk-mux which extends the generic ones to use global lock2 to protect the register fields. It is common with metag to have an RTOS running on a different thread or core with access to different bits in the same register (which contain clock gate/switch bits for other clocks). Access to such registers must be serialised with a global lock such as the one provided by the metag architecture port in RFC because despite extending the generic clocks there's still a bit of duplicated code necessary. One alternative is to add special cases to the generic clock components for when a global or callback function based lock is desired instead of a spinlock, but I wasn't sure if that sort of hack would really be appreciated in the generic drivers. Comments? James Hogan (2): clk: metag/clk-gate: add metag specific clock gate clk: metag/clk-mux: add metag specific clk-mux .../bindings/clock/img,meta-gate-clock.txt | 28 +++ .../bindings/clock/img,meta-mux-clock.txt | 33 ++++ drivers/clk/Makefile | 1 + drivers/clk/metag/Makefile | 3 + drivers/clk/metag/clk-gate.c | 179 +++++++++++++++++ drivers/clk/metag/clk-mux.c | 211 +++++++++++++++++++++ 6 files changed, 455 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/img,meta-gate-clock.txt create mode 100644 Documentation/devicetree/bindings/clock/img,meta-mux-clock.txt create mode 100644 drivers/clk/metag/Makefile create mode 100644 drivers/clk/metag/clk-gate.c create mode 100644 drivers/clk/metag/clk-mux.c -- 1.8.1.2