From: jhovold@gmail.com (Johan Hovold)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/5] rtc-at91rm9200: add configuration support
Date: Thu, 23 May 2013 10:38:52 +0200 [thread overview]
Message-ID: <1369298335-24597-3-git-send-email-jhovold@gmail.com> (raw)
In-Reply-To: <1369298335-24597-1-git-send-email-jhovold@gmail.com>
Add configuration support which can be used to implement SoC-specific
workarounds for broken hardware.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
---
drivers/rtc/rtc-at91rm9200.c | 46 ++++++++++++++++++++++++++++++++++++--------
1 file changed, 38 insertions(+), 8 deletions(-)
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index eeeb73f..ab2024b 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -42,6 +42,10 @@
#define AT91_RTC_EPOCH 1900UL /* just like arch/arm/common/rtctime.c */
+struct at91_rtc_config {
+};
+
+static const struct at91_rtc_config *at91_rtc_config;
static DECLARE_COMPLETION(at91_rtc_updated);
static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
static void __iomem *at91_rtc_regs;
@@ -250,6 +254,36 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
return IRQ_NONE; /* not handled */
}
+static const struct at91_rtc_config at91rm9200_config = {
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id at91_rtc_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-rtc",
+ .data = &at91rm9200_config,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
+#endif
+
+static const struct at91_rtc_config *
+at91_rtc_get_config(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+
+ if (pdev->dev.of_node) {
+ match = of_match_node(at91_rtc_dt_ids, pdev->dev.of_node);
+ if (!match)
+ return NULL;
+ return (const struct at91_rtc_config *)match->data;
+ }
+
+ return &at91rm9200_config;
+}
+
static const struct rtc_class_ops at91_rtc_ops = {
.read_time = at91_rtc_readtime,
.set_time = at91_rtc_settime,
@@ -268,6 +302,10 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
struct resource *regs;
int ret = 0;
+ at91_rtc_config = at91_rtc_get_config(pdev);
+ if (!at91_rtc_config)
+ return -ENODEV;
+
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
dev_err(&pdev->dev, "no mmio resource defined\n");
@@ -383,14 +421,6 @@ static int at91_rtc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
-#ifdef CONFIG_OF
-static const struct of_device_id at91_rtc_dt_ids[] = {
- { .compatible = "atmel,at91rm9200-rtc" },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
-#endif
-
static struct platform_driver at91_rtc_driver = {
.remove = __exit_p(at91_rtc_remove),
.driver = {
--
1.8.2.1
next prev parent reply other threads:[~2013-05-23 8:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1364983415-20298-1-git-send-email-jhovold@gmail.com>
2013-05-23 8:38 ` [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask Johan Hovold
2013-05-23 8:38 ` [PATCH v3 1/5] rtc-at91rm9200: add match-table compile guard Johan Hovold
2013-05-23 8:38 ` Johan Hovold [this message]
2013-05-23 8:38 ` [PATCH v3 3/5] rtc-at91rm9200: refactor interrupt-register handling Johan Hovold
2013-05-23 8:38 ` [PATCH v3 4/5] rtc-at91rm9200: add shadow interrupt mask Johan Hovold
2013-05-23 8:38 ` [PATCH v3 5/5] rtc-at91rm9200: use shadow IMR on at91sam9x5 Johan Hovold
2013-05-29 20:33 ` [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask Andrew Morton
2013-05-29 20:41 ` Robert Nelson
2013-05-29 23:22 ` Douglas Gilbert
2013-05-30 8:18 ` Nicolas Ferre
2013-05-30 7:50 ` Nicolas Ferre
2013-05-30 19:36 ` Andrew Morton
2013-05-30 23:17 ` Douglas Gilbert
2013-05-31 7:54 ` Nicolas Ferre
2013-05-30 7:41 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369298335-24597-3-git-send-email-jhovold@gmail.com \
--to=jhovold@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).