From: dinguyen@altera.com (dinguyen at altera.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 2/6] ARM: socfpga: dts: Add gate-clock bindings
Date: Fri, 24 May 2013 10:41:16 -0500 [thread overview]
Message-ID: <1369410080-436-2-git-send-email-dinguyen@altera.com> (raw)
In-Reply-To: <1369410080-436-1-git-send-email-dinguyen@altera.com>
From: Dinh Nguyen <dinguyen@altera.com>
Add bindings for "socfpga-gate-clk" clocks. These clocks directly feed
the peripherals.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
CC: <linux@arm.linux.org.uk>
---
.../devicetree/bindings/clock/altr_socfpga.txt | 7 +
arch/arm/boot/dts/socfpga.dtsi | 199 ++++++++++++++++++++
2 files changed, 206 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
index bd0c841..0045433 100644
--- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -9,6 +9,9 @@ Required properties:
"altr,socfpga-pll-clock" - for a PLL clock
"altr,socfpga-perip-clock" - The peripheral clock divided from the
PLL clock.
+ "altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
+ can get gated.
+
- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
- clocks : shall be the input parent clock phandle for the clock. This is
either an oscillator or a pll output.
@@ -16,3 +19,7 @@ Required properties:
Optional properties:
- fixed-divider : If clocks have a fixed divider value, use this property.
+- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
+ and the bit index.
+- div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift,
+ and width.
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 02bb425..bee62a2 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -95,6 +95,12 @@
compatible = "fixed-clock";
};
+ f2s_periph_ref_clk: f2s_periph_ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <10000000>;
+ };
+
main_pll: main_pll {
#address-cells = <1>;
#size-cells = <0>;
@@ -236,6 +242,199 @@
reg = <0xD4>;
};
};
+
+ mpu_periph_clk: mpu_periph_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mpuclk>;
+ fixed-divider = <4>;
+ };
+
+ mpu_l2_ram_clk: mpu_l2_ram_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mpuclk>;
+ fixed-divider = <2>;
+ };
+
+ l4_main_clk: l4_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ clk-gate = <0x60 0>;
+ };
+
+ l3_main_clk: l3_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ };
+
+ l3_mp_clk: l3_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ div-reg = <0x64 0 2>;
+ clk-gate = <0x60 1>;
+ };
+
+ l3_sp_clk: l3_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ div-reg = <0x64 2 2>;
+ };
+
+ l4_mp_clk: l4_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>, <&per_base_clk>;
+ div-reg = <0x64 4 3>;
+ clk-gate = <0x60 2>;
+ };
+
+ l4_sp_clk: l4_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>, <&per_base_clk>;
+ div-reg = <0x64 7 3>;
+ clk-gate = <0x60 3>;
+ };
+
+ dbg_at_clk: dbg_at_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x68 0 2>;
+ clk-gate = <0x60 4>;
+ };
+
+ dbg_clk: dbg_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x68 2 2>;
+ clk-gate = <0x60 5>;
+ };
+
+ dbg_trace_clk: dbg_trace_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x6C 0 3>;
+ clk-gate = <0x60 6>;
+ };
+
+ dbg_timer_clk: dbg_timer_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ clk-gate = <0x60 7>;
+ };
+
+ cfg_clk: cfg_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&cfg_s2f_usr0_clk>;
+ clk-gate = <0x60 8>;
+ };
+
+ s2f_user0_clk: s2f_user0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&cfg_s2f_usr0_clk>;
+ clk-gate = <0x60 9>;
+ };
+
+ emac_0_clk: emac_0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&emac0_clk>;
+ clk-gate = <0xa0 0>;
+ };
+
+ emac_1_clk: emac_1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&emac1_clk>;
+ clk-gate = <0xa0 1>;
+ };
+
+ usb_mp_clk: usb_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 2>;
+ div-reg = <0xa4 0 3>;
+ };
+
+ spi_m_clk: spi_m_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 3>;
+ div-reg = <0xa4 3 3>;
+ };
+
+ can0_clk: can0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 4>;
+ div-reg = <0xa4 6 3>;
+ };
+
+ can1_clk: can1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 5>;
+ div-reg = <0xa4 9 3>;
+ };
+
+ gpio_db_clk: gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 6>;
+ div-reg = <0xa8 0 24>;
+ };
+
+ s2f_user1_clk: s2f_user1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&s2f_usr1_clk>;
+ clk-gate = <0xa0 7>;
+ };
+
+ sdmmc_clk: sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 8>;
+ };
+
+ nand_x_clk: nand_x_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 9>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 10>;
+ fixed-divider = <4>;
+ };
+
+ qspi_clk: qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+ clk-gate = <0xa0 11>;
+ };
};
};
--
1.7.9.5
next prev parent reply other threads:[~2013-05-24 15:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-24 15:41 [PATCHv4 1/6] ARM: socfpga: dts: Add ethernet bindings for SOCFPGA dinguyen at altera.com
2013-05-24 15:41 ` dinguyen at altera.com [this message]
2013-05-24 15:41 ` [PATCHv4 3/6] ARM: socfpga: Add support to gate peripheral clocks dinguyen at altera.com
2013-05-30 19:42 ` Mike Turquette
2013-05-30 21:33 ` Dinh Nguyen
2013-05-24 15:41 ` [PATCHv4 4/6] ARM: socfpga: Add syscon to be part of socfpga dinguyen at altera.com
2013-05-24 15:41 ` [PATCHv4 5/6] ARM: socfpga: dts: Add support for SD/MMC dinguyen at altera.com
2013-05-24 15:41 ` [PATCHv4 6/6] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA dinguyen at altera.com
2013-05-24 17:10 ` Arnd Bergmann
2013-05-24 17:12 ` Arnd Bergmann
2013-05-24 18:03 ` Dinh Nguyen
2013-05-24 18:58 ` Arnd Bergmann
2013-05-26 18:11 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369410080-436-2-git-send-email-dinguyen@altera.com \
--to=dinguyen@altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).