From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 27 May 2013 12:00:37 +0200 Subject: [PATCHv3 0/6] Add I2C support for Allwinner SoCs Message-ID: <1369648843-1640-1-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, This patchset adds support for the I2C controller found on most of the Allwinner SoCs, especially the already supported A10 and A13, and the yet to come A31. It has been tested on a A13-Olinuxino. Thanks, Maxime Changes from v2: * Slightly modified the switch comments again * Removed the of_* calls in favor of platform_get_* functions Changes from v1: * Added comments to the switch statements to clarify when the fall through to the next case is made on purpose * Use devm_ioremap_resource instead of of_iomap * Moved the reset after enabling the clocks * Added Emilio Lopez' patch to add the available i2c controllers to the cubieboard Emilio L?pez (1): ARM: sun4i: cubieboard: Enable the i2c controllers Maxime Ripard (5): i2c: sunxi: Add Allwinner A1X i2c driver ARM: sunxi: dt: Add i2c controller nodes to the DTSI ARM: sun4i: dt: Add i2c muxing options ARM: sun5i: dt: Add i2c muxing options ARM: sun5i: olinuxino: Enable the i2c controllers .../devicetree/bindings/i2c/i2c-sunxi.txt | 19 + arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 12 + arch/arm/boot/dts/sun4i-a10.dtsi | 48 +++ arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 18 + arch/arm/boot/dts/sun5i-a13.dtsi | 48 +++ drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-sunxi.c | 444 +++++++++++++++++++++ 8 files changed, 600 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sunxi.txt create mode 100644 drivers/i2c/busses/i2c-sunxi.c -- 1.8.2.3