* [PATCH v2 1/5] ARM: davinci: uart: move to devid based clk_get
2013-05-28 8:28 [PATCH v2 0/5] ARM: davinci: fix UART clock enabling Manjunathappa, Prakash
@ 2013-05-28 8:28 ` Manjunathappa, Prakash
2013-06-06 10:32 ` Sekhar Nori
2013-06-07 5:35 ` Sekhar Nori
2013-05-28 8:28 ` [PATCH v2 2/5] ARM: davinci: da850: override device name of UART in DT kernel Manjunathappa, Prakash
` (3 subsequent siblings)
4 siblings, 2 replies; 13+ messages in thread
From: Manjunathappa, Prakash @ 2013-05-28 8:28 UTC (permalink / raw)
To: linux-arm-kernel
For modules having single clock, clk_get should be done with dev_id.
But current davinci implementation handles multiple instances
of the UART devices with single platform_device_register. Hence clk_get
is based on con_id rather than dev_id, this is not correct. Do
platform_device_register for each instance and clk_get on dev_id.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
---
arch/arm/mach-davinci/da830.c | 8 ++--
arch/arm/mach-davinci/da850.c | 8 ++--
arch/arm/mach-davinci/devices-da8xx.c | 41 ++++++++++++++------
arch/arm/mach-davinci/devices-tnetv107x.c | 34 ++++++++++++-----
arch/arm/mach-davinci/dm355.c | 49 ++++++++++++++++--------
arch/arm/mach-davinci/dm365.c | 37 +++++++++++-------
arch/arm/mach-davinci/dm644x.c | 49 ++++++++++++++++--------
arch/arm/mach-davinci/dm646x.c | 48 ++++++++++++++++-------
arch/arm/mach-davinci/include/mach/da8xx.h | 2 +-
arch/arm/mach-davinci/include/mach/serial.h | 4 ++
arch/arm/mach-davinci/include/mach/tnetv107x.h | 2 +-
arch/arm/mach-davinci/serial.c | 19 ++++++---
arch/arm/mach-davinci/tnetv107x.c | 8 ++--
13 files changed, 205 insertions(+), 104 deletions(-)
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index abbaf02..a3ffd52 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -395,9 +395,9 @@ static struct clk_lookup da830_clks[] = {
CLK(NULL, "tptc0", &tptc0_clk),
CLK(NULL, "tptc1", &tptc1_clk),
CLK("da830-mmc.0", NULL, &mmcsd_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK(NULL, "ecap0", &ecap0_clk),
@@ -1199,7 +1199,7 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 128,
.gpio_irq = IRQ_DA8XX_GPIO0,
- .serial_dev = &da8xx_serial_device,
+ .serial_dev = da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
};
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 4d69338..7ce691c 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -451,9 +451,9 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "tpcc1", &tpcc1_clk),
CLK(NULL, "tptc2", &tptc2_clk),
CLK("pruss_uio", "pruss", &pruss_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("i2c_davinci.2", NULL, &i2c1_clk),
@@ -1301,7 +1301,7 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 144,
.gpio_irq = IRQ_DA8XX_GPIO0,
- .serial_dev = &da8xx_serial_device,
+ .serial_dev = da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_SHARED_RAM_BASE,
.sram_len = SZ_128K,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index bf57252..e243d97 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -67,7 +67,7 @@
void __iomem *da8xx_syscfg0_base;
void __iomem *da8xx_syscfg1_base;
-static struct plat_serial8250_port da8xx_serial_pdata[] = {
+static struct plat_serial8250_port da8xx_serial0_pdata[] = {
{
.mapbase = DA8XX_UART0_BASE,
.irq = IRQ_DA8XX_UARTINT0,
@@ -75,7 +75,9 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port da8xx_serial1_pdata[] = {
{
.mapbase = DA8XX_UART1_BASE,
.irq = IRQ_DA8XX_UARTINT1,
@@ -83,7 +85,9 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port da8xx_serial2_pdata[] = {
{
.mapbase = DA8XX_UART2_BASE,
.irq = IRQ_DA8XX_UARTINT2,
@@ -91,18 +95,31 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
- {
- .flags = 0,
- },
+ }
};
-struct platform_device da8xx_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = da8xx_serial_pdata,
+struct platform_device da8xx_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = da8xx_serial0_pdata
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = da8xx_serial1_pdata
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = da8xx_serial2_pdata
+ }
+ }
};
static const s8 da8xx_queue_tc_mapping[][2] = {
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index cfb194d..35e5594 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -126,7 +126,7 @@ static struct platform_device edma_device = {
.dev.platform_data = tnetv107x_edma_info,
};
-static struct plat_serial8250_port serial_data[] = {
+static struct plat_serial8250_port serial0_platform_data[] = {
{
.mapbase = TNETV107X_UART0_BASE,
.irq = IRQ_TNETV107X_UART0,
@@ -135,7 +135,9 @@ static struct plat_serial8250_port serial_data[] = {
.type = PORT_AR7,
.iotype = UPIO_MEM32,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port serial1_platform_data[] = {
{
.mapbase = TNETV107X_UART1_BASE,
.irq = IRQ_TNETV107X_UART1,
@@ -144,7 +146,9 @@ static struct plat_serial8250_port serial_data[] = {
.type = PORT_AR7,
.iotype = UPIO_MEM32,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port serial2_platform_data[] = {
{
.mapbase = TNETV107X_UART2_BASE,
.irq = IRQ_TNETV107X_UART2,
@@ -153,16 +157,26 @@ static struct plat_serial8250_port serial_data[] = {
.type = PORT_AR7,
.iotype = UPIO_MEM32,
.regshift = 2,
+ }
+};
+
+
+struct platform_device tnetv107x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = serial0_platform_data
},
{
- .flags = 0,
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev.platform_data = serial1_platform_data
},
-};
-
-struct platform_device tnetv107x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev.platform_data = serial_data,
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev.platform_data = serial2_platform_data
+ }
};
static struct resource mmc0_resources[] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a11034a..a7ef0e3 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -357,9 +357,9 @@ static struct clk_lookup dm355_clks[] = {
CLK(NULL, "clkout3", &clkout3_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "mjcp", &mjcp_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("davinci-mcbsp.0", NULL, &asp0_clk),
CLK("davinci-mcbsp.1", NULL, &asp1_clk),
@@ -922,7 +922,7 @@ static struct davinci_timer_info dm355_timer_info = {
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm355_serial_platform_data[] = {
+static struct plat_serial8250_port dm355_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -930,7 +930,9 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port dm355_serial1_platform_data[] = {
{
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
@@ -938,7 +940,9 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port dm355_serial2_platform_data[] = {
{
.mapbase = DM355_UART2_BASE,
.irq = IRQ_DM355_UARTINT2,
@@ -946,18 +950,31 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
- {
- .flags = 0
- },
+ }
};
-static struct platform_device dm355_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm355_serial_platform_data,
+static struct platform_device dm355_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm355_serial0_platform_data
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm355_serial1_platform_data
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm355_serial2_platform_data
+ }
+ }
};
static struct davinci_soc_info davinci_soc_info_dm355 = {
@@ -981,7 +998,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 104,
.gpio_irq = IRQ_DM355_GPIOBNK0,
- .serial_dev = &dm355_serial_device,
+ .serial_dev = dm355_serial_device,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 40fa4fe..abeac28 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -455,8 +455,8 @@ static struct clk_lookup dm365_clks[] = {
CLK("vpss", "master", &vpss_master_clk),
CLK("vpss", "slave", &vpss_slave_clk),
CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("da830-mmc.0", NULL, &mmcsd0_clk),
CLK("da830-mmc.1", NULL, &mmcsd1_clk),
@@ -1041,7 +1041,7 @@ static struct davinci_timer_info dm365_timer_info = {
#define DM365_UART1_BASE (IO_PHYS + 0x106000)
-static struct plat_serial8250_port dm365_serial_platform_data[] = {
+static struct plat_serial8250_port dm365_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -1049,7 +1049,9 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port dm365_serial1_platform_data[] = {
{
.mapbase = DM365_UART1_BASE,
.irq = IRQ_UARTINT1,
@@ -1057,20 +1059,27 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
- {
- .flags = 0
- },
+ }
};
-static struct platform_device dm365_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm365_serial_platform_data,
+static struct platform_device dm365_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm365_serial0_platform_data
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm365_serial1_platform_data
+ }
+ }
};
+
static struct davinci_soc_info davinci_soc_info_dm365 = {
.io_desc = dm365_io_desc,
.io_desc_num = ARRAY_SIZE(dm365_io_desc),
@@ -1093,7 +1102,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
.gpio_num = 104,
.gpio_irq = IRQ_DM365_GPIO0,
.gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */
- .serial_dev = &dm365_serial_device,
+ .serial_dev = dm365_serial_device,
.emac_pdata = &dm365_emac_pdata,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4d37d3e..cc68266 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -303,9 +303,9 @@ static struct clk_lookup dm644x_clks[] = {
CLK("vpss", "master", &vpss_master_clk),
CLK("vpss", "slave", &vpss_slave_clk),
CLK(NULL, "arm", &arm_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
@@ -813,7 +813,7 @@ static struct davinci_timer_info dm644x_timer_info = {
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+static struct plat_serial8250_port dm644x_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -821,7 +821,9 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port dm644x_serial1_platform_data[] = {
{
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
@@ -829,7 +831,9 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
{
.mapbase = DAVINCI_UART2_BASE,
.irq = IRQ_UARTINT2,
@@ -837,18 +841,31 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- },
- {
- .flags = 0
- },
+ }
};
-static struct platform_device dm644x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm644x_serial_platform_data,
+static struct platform_device dm644x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm644x_serial0_platform_data
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm644x_serial1_platform_data
+ }
+ },
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm644x_serial2_platform_data
+ }
+ }
};
static struct davinci_soc_info davinci_soc_info_dm644x = {
@@ -872,7 +889,7 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 71,
.gpio_irq = IRQ_GPIOBNK0,
- .serial_dev = &dm644x_serial_device,
+ .serial_dev = dm644x_serial_device,
.emac_pdata = &dm644x_emac_pdata,
.sram_dma = 0x00008000,
.sram_len = SZ_16K,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index ac7b431..1fec246 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -342,9 +342,9 @@ static struct clk_lookup dm646x_clks[] = {
CLK(NULL, "edma_tc1", &edma_tc1_clk),
CLK(NULL, "edma_tc2", &edma_tc2_clk),
CLK(NULL, "edma_tc3", &edma_tc3_clk),
- CLK(NULL, "uart0", &uart0_clk),
- CLK(NULL, "uart1", &uart1_clk),
- CLK(NULL, "uart2", &uart2_clk),
+ CLK("serial8250.0", NULL, &uart0_clk),
+ CLK("serial8250.1", NULL, &uart1_clk),
+ CLK("serial8250.2", NULL, &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
@@ -790,7 +790,7 @@ static struct davinci_timer_info dm646x_timer_info = {
.clocksource_id = T0_TOP,
};
-static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
@@ -798,7 +798,9 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM32,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port dm646x_serial1_platform_data[] = {
{
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
@@ -806,7 +808,9 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM32,
.regshift = 2,
- },
+ }
+};
+static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
{
.mapbase = DAVINCI_UART2_BASE,
.irq = IRQ_DM646X_UARTINT2,
@@ -814,19 +818,33 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
UPF_IOREMAP,
.iotype = UPIO_MEM32,
.regshift = 2,
+ }
+};
+
+static struct platform_device dm646x_serial_device[] = {
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm646x_serial0_platform_data
+ }
},
{
- .flags = 0
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = dm646x_serial1_platform_data
+ }
},
+ {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM2,
+ .dev = {
+ .platform_data = dm646x_serial2_platform_data
+ }
+ }
};
-static struct platform_device dm646x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = dm646x_serial_platform_data,
- },
-};
static struct davinci_soc_info davinci_soc_info_dm646x = {
.io_desc = dm646x_io_desc,
@@ -849,7 +867,7 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 43, /* Only 33 usable */
.gpio_irq = IRQ_DM646X_GPIOBNK0,
- .serial_dev = &dm646x_serial_device,
+ .serial_dev = dm646x_serial_device,
.emac_pdata = &dm646x_emac_pdata,
.sram_dma = 0x10010000,
.sram_len = SZ_32K,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 2e1c9ea..71aa7d0 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -110,7 +110,7 @@ void da8xx_restart(char mode, const char *cmd);
void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
-extern struct platform_device da8xx_serial_device;
+extern struct platform_device da8xx_serial_device[];
extern struct emac_platform_data da8xx_emac_pdata;
extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 62ad300..34d9877 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -44,6 +44,10 @@ struct davinci_uart_config {
extern int davinci_serial_init(struct davinci_uart_config *);
extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate);
+extern struct platform_device dm365_serial_device[];
+extern struct platform_device dm355_serial_device[];
+extern struct platform_device dm644x_serial_device[];
+extern struct platform_device dm646x_serial_device[];
#endif
#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 1656a02..07948a5 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -49,7 +49,7 @@ struct tnetv107x_device_info {
};
extern struct platform_device tnetv107x_wdt_device;
-extern struct platform_device tnetv107x_serial_device;
+extern struct platform_device tnetv107x_serial_device[];
extern void __init tnetv107x_init(void);
extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index f262581..57e6150 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -76,7 +76,7 @@ int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
char name[16];
struct clk *clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct device *dev = &soc_info->serial_dev->dev;
+ struct device *dev = &soc_info->serial_dev[instance].dev;
sprintf(name, "uart%d", instance);
clk = clk_get(dev, name);
@@ -96,19 +96,25 @@ int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
int __init davinci_serial_init(struct davinci_uart_config *info)
{
- int i, ret;
+ int i, ret = 0;
struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct device *dev = &soc_info->serial_dev->dev;
- struct plat_serial8250_port *p = dev->platform_data;
+ struct device *dev;
+ struct plat_serial8250_port *p;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on if not needed.
*/
- for (i = 0; p->flags; i++, p++) {
+ for (i = 0; soc_info->serial_dev[i].dev.platform_data != NULL; i++) {
+ dev = &soc_info->serial_dev[i].dev;
+ p = dev->platform_data;
if (!(info->enabled_uarts & (1 << i)))
continue;
+ ret = platform_device_register(&soc_info->serial_dev[i]);
+ if (ret)
+ continue;
+
ret = davinci_serial_setup_clk(i, &p->uartclk);
if (ret)
continue;
@@ -125,6 +131,5 @@ int __init davinci_serial_init(struct davinci_uart_config *info)
if (p->membase && p->type != PORT_AR7)
davinci_serial_reset(p);
}
-
- return platform_device_register(soc_info->serial_dev);
+ return ret;
}
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 3b2a70d..d8a9516 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -263,7 +263,7 @@ static struct clk_lookup clks[] = {
CLK(NULL, "clk_chipcfg", &clk_chipcfg),
CLK("tnetv107x-ts.0", NULL, &clk_tsc),
CLK(NULL, "clk_rom", &clk_rom),
- CLK(NULL, "uart2", &clk_uart2),
+ CLK("serial8250.2", NULL, &clk_uart2),
CLK(NULL, "clk_pktsec", &clk_pktsec),
CLK("tnetv107x-rng.0", NULL, &clk_rng),
CLK("tnetv107x-pka.0", NULL, &clk_pka),
@@ -273,8 +273,8 @@ static struct clk_lookup clks[] = {
CLK(NULL, "clk_gpio", &clk_gpio),
CLK(NULL, "clk_mdio", &clk_mdio),
CLK("dm6441-mmc.0", NULL, &clk_sdio0),
- CLK(NULL, "uart0", &clk_uart0),
- CLK(NULL, "uart1", &clk_uart1),
+ CLK("serial8250.0", NULL, &clk_uart0),
+ CLK("serial8250.1", NULL, &clk_uart1),
CLK(NULL, "timer0", &clk_timer0),
CLK(NULL, "timer1", &clk_timer1),
CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm),
@@ -756,7 +756,7 @@ static struct davinci_soc_info tnetv107x_soc_info = {
.gpio_type = GPIO_TYPE_TNETV107X,
.gpio_num = TNETV107X_N_GPIO,
.timer_info = &timer_info,
- .serial_dev = &tnetv107x_serial_device,
+ .serial_dev = tnetv107x_serial_device,
};
void __init tnetv107x_init(void)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v2 5/5] ARM: davinci: serial: platform code cleanup
2013-05-28 8:28 [PATCH v2 0/5] ARM: davinci: fix UART clock enabling Manjunathappa, Prakash
` (3 preceding siblings ...)
2013-05-28 8:28 ` [PATCH v2 4/5] ARM: davinci: da8xx: remove da8xx_uart_clk_enable Manjunathappa, Prakash
@ 2013-05-28 8:28 ` Manjunathappa, Prakash
2013-06-05 11:41 ` Sekhar Nori
4 siblings, 1 reply; 13+ messages in thread
From: Manjunathappa, Prakash @ 2013-05-28 8:28 UTC (permalink / raw)
To: linux-arm-kernel
1) "struct davinci_uart_config" is introduced to specify
UART ports brought out or enabled on the board. But
none of the boards use them for that purpose, so clean
it up.
2) Have pointer to platform device as a argument for
davinci_serial_init(), no need of serial_dev in
struct soc_info now.
3) No need of davinci_serial_setup_clk(), not called from
multiple places, hence reduce function call overhead.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Suggested-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 6 +---
arch/arm/mach-davinci/board-da850-evm.c | 6 +---
arch/arm/mach-davinci/board-dm355-evm.c | 6 +---
arch/arm/mach-davinci/board-dm355-leopard.c | 6 +---
arch/arm/mach-davinci/board-dm365-evm.c | 6 +---
arch/arm/mach-davinci/board-dm644x-evm.c | 6 +---
arch/arm/mach-davinci/board-dm646x-evm.c | 6 +---
arch/arm/mach-davinci/board-mityomapl138.c | 6 +---
arch/arm/mach-davinci/board-neuros-osd2.c | 6 +---
arch/arm/mach-davinci/board-omapl138-hawk.c | 6 +---
arch/arm/mach-davinci/board-sffsdr.c | 7 +---
arch/arm/mach-davinci/da830.c | 1 -
arch/arm/mach-davinci/da850.c | 1 -
arch/arm/mach-davinci/devices-tnetv107x.c | 2 +-
arch/arm/mach-davinci/dm355.c | 3 +-
arch/arm/mach-davinci/dm365.c | 3 +-
arch/arm/mach-davinci/dm644x.c | 3 +-
arch/arm/mach-davinci/dm646x.c | 3 +-
arch/arm/mach-davinci/include/mach/common.h | 1 -
arch/arm/mach-davinci/include/mach/serial.h | 10 ++---
arch/arm/mach-davinci/include/mach/tnetv107x.h | 1 -
arch/arm/mach-davinci/serial.c | 47 +++++++-----------------
22 files changed, 35 insertions(+), 107 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 1332de8..c4bdc0a 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -185,10 +185,6 @@ static __init void da830_evm_usb_init(void)
__func__, ret);
}
-static struct davinci_uart_config da830_evm_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
static const short da830_evm_mcasp1_pins[] = {
DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
@@ -630,7 +626,7 @@ static __init void da830_evm_init(void)
pr_warning("da830_evm_init: watchdog registration failed: %d\n",
ret);
- davinci_serial_init(&da830_evm_uart_config);
+ davinci_serial_init(da8xx_serial_device);
i2c_register_board_info(1, da830_evm_i2c_devices,
ARRAY_SIZE(da830_evm_i2c_devices));
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 8a24b6c..9ac76ee 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -746,10 +746,6 @@ static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
.bus_delay = 0, /* usec */
};
-static struct davinci_uart_config da850_evm_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
/* davinci da850 evm audio machine driver */
static u8 da850_iis_serializer_direction[] = {
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
@@ -1495,7 +1491,7 @@ static __init void da850_evm_init(void)
__func__, ret);
}
- davinci_serial_init(&da850_evm_uart_config);
+ davinci_serial_init(da8xx_serial_device);
i2c_register_board_info(1, da850_evm_i2c_devices,
ARRAY_SIZE(da850_evm_i2c_devices));
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index c2a0a67..42b23a3 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -314,10 +314,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
&davinci_nand_device,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init dm355_evm_map_io(void)
{
dm355_init();
@@ -393,7 +389,7 @@ static __init void dm355_evm_init(void)
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm355_serial_device);
/* NOTE: NAND flash timings set by the UBL are slower than
* needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index dff4ddc..d9eb1c9 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -172,10 +172,6 @@ static struct platform_device *davinci_leopard_devices[] __initdata = {
&davinci_nand_device,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init dm355_leopard_map_io(void)
{
dm355_init();
@@ -251,7 +247,7 @@ static __init void dm355_leopard_init(void)
platform_add_devices(davinci_leopard_devices,
ARRAY_SIZE(davinci_leopard_devices));
leopard_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm355_serial_device);
/* NOTE: NAND flash timings set by the UBL are slower than
* needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index fd38c8d..5f1ec9d 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -719,10 +719,6 @@ fail:
/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
}
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init dm365_evm_map_io(void)
{
dm365_init();
@@ -749,7 +745,7 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = {
static __init void dm365_evm_init(void)
{
evm_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm365_serial_device);
dm365evm_emac_configure();
dm365evm_mmc_configure();
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index a33686a..462812b 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -726,10 +726,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
&rtc_dev,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init
davinci_evm_map_io(void)
{
@@ -791,7 +787,7 @@ static __init void davinci_evm_init(void)
davinci_setup_mmc(0, &dm6446evm_mmc_config);
dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm644x_serial_device);
dm644x_init_asp(&dm644x_evm_snd_data);
/* irlml6401 switches over 1A, in under 8 msec */
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index fbb8e5a..734cc02 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -749,10 +749,6 @@ static void __init davinci_map_io(void)
cdce_clk_init();
}
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
/*
* The following EDMA channels/slots are not being used by drivers (for
@@ -792,7 +788,7 @@ static __init void evm_init(void)
struct davinci_soc_info *soc_info = &davinci_soc_info;
evm_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm646x_serial_device);
dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 9549d53..cd0f587 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -434,10 +434,6 @@ static void __init mityomapl138_setup_nand(void)
ARRAY_SIZE(mityomapl138_devices));
}
-static struct davinci_uart_config mityomapl138_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
static const short mityomap_mii_pins[] = {
DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
@@ -517,7 +513,7 @@ static void __init mityomapl138_init(void)
if (ret)
pr_warning("watchdog registration failed: %d\n", ret);
- davinci_serial_init(&mityomapl138_uart_config);
+ davinci_serial_init(da8xx_serial_device);
ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
if (ret)
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 2bc112a..8e156e0 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -153,10 +153,6 @@ static struct platform_device *davinci_ntosd2_devices[] __initdata = {
&ntosd2_leds_dev,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init davinci_ntosd2_map_io(void)
{
dm644x_init();
@@ -197,7 +193,7 @@ static __init void davinci_ntosd2_init(void)
platform_add_devices(davinci_ntosd2_devices,
ARRAY_SIZE(davinci_ntosd2_devices));
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm644x_serial_device);
dm644x_init_asp(&dm644x_ntosd2_snd_data);
soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index b8c20de..ab98c75 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -286,15 +286,11 @@ usb11_setup_oc_fail:
gpio_free(DA850_USB1_VBUS_PIN);
}
-static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
- .enabled_uarts = 0x7,
-};
-
static __init void omapl138_hawk_init(void)
{
int ret;
- davinci_serial_init(&omapl138_hawk_uart_config);
+ davinci_serial_init(da8xx_serial_device);
omapl138_hawk_config_emac();
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 739be7e..96ca11b 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -44,6 +44,7 @@
#include "davinci.h"
#define SFFSDR_PHY_ID "davinci_mdio-0:01"
+
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
* UBL: Block 1
@@ -125,10 +126,6 @@ static struct platform_device *davinci_sffsdr_devices[] __initdata = {
&davinci_sffsdr_nandflash_device,
};
-static struct davinci_uart_config uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
static void __init davinci_sffsdr_map_io(void)
{
dm644x_init();
@@ -141,7 +138,7 @@ static __init void davinci_sffsdr_init(void)
platform_add_devices(davinci_sffsdr_devices,
ARRAY_SIZE(davinci_sffsdr_devices));
sffsdr_init_i2c();
- davinci_serial_init(&uart_config);
+ davinci_serial_init(dm644x_serial_device);
soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
davinci_setup_usb(0, 0); /* We support only peripheral mode. */
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index a3ffd52..111613b 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1199,7 +1199,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 128,
.gpio_irq = IRQ_DA8XX_GPIO0,
- .serial_dev = da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
};
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 7ce691c..b1d56e5 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1301,7 +1301,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
.gpio_base = DA8XX_GPIO_BASE,
.gpio_num = 144,
.gpio_irq = IRQ_DA8XX_GPIO0,
- .serial_dev = da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_SHARED_RAM_BASE,
.sram_len = SZ_128K,
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 35e5594..549cfad 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -399,7 +399,7 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
platform_device_register(&tsc_device);
if (info->serial_config)
- davinci_serial_init(info->serial_config);
+ davinci_serial_init(tnetv107x_serial_device);
for (i = 0; i < 2; i++)
if (info->mmc_config[i]) {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a7ef0e3..006d5aa 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -953,7 +953,7 @@ static struct plat_serial8250_port dm355_serial2_platform_data[] = {
}
};
-static struct platform_device dm355_serial_device[] = {
+struct platform_device dm355_serial_device[] = {
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
@@ -998,7 +998,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 104,
.gpio_irq = IRQ_DM355_GPIOBNK0,
- .serial_dev = dm355_serial_device,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index abeac28..a8c4c95 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1062,7 +1062,7 @@ static struct plat_serial8250_port dm365_serial1_platform_data[] = {
}
};
-static struct platform_device dm365_serial_device[] = {
+struct platform_device dm365_serial_device[] = {
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
@@ -1102,7 +1102,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
.gpio_num = 104,
.gpio_irq = IRQ_DM365_GPIO0,
.gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */
- .serial_dev = dm365_serial_device,
.emac_pdata = &dm365_emac_pdata,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index cc68266..f4da786 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -844,7 +844,7 @@ static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
}
};
-static struct platform_device dm644x_serial_device[] = {
+struct platform_device dm644x_serial_device[] = {
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
@@ -889,7 +889,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 71,
.gpio_irq = IRQ_GPIOBNK0,
- .serial_dev = dm644x_serial_device,
.emac_pdata = &dm644x_emac_pdata,
.sram_dma = 0x00008000,
.sram_len = SZ_16K,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1fec246..72cc683 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -821,7 +821,7 @@ static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
}
};
-static struct platform_device dm646x_serial_device[] = {
+struct platform_device dm646x_serial_device[] = {
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
@@ -867,7 +867,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
.gpio_base = DAVINCI_GPIO_BASE,
.gpio_num = 43, /* Only 33 usable */
.gpio_irq = IRQ_DM646X_GPIOBNK0,
- .serial_dev = dm646x_serial_device,
.emac_pdata = &dm646x_emac_pdata,
.sram_dma = 0x10010000,
.sram_len = SZ_32K,
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index b124b77..7f5a2e9 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -71,7 +71,6 @@ struct davinci_soc_info {
unsigned gpio_unbanked;
struct davinci_gpio_controller *gpio_ctlrs;
int gpio_ctlrs_num;
- struct platform_device *serial_dev;
struct emac_platform_data *emac_pdata;
dma_addr_t sram_dma;
unsigned sram_len;
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 34d9877..c7303d0 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -15,6 +15,8 @@
#include <mach/hardware.h>
+#include <linux/platform_device.h>
+
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
@@ -37,13 +39,9 @@
#define UART_DM646X_SCR_TX_WATERMARK 0x08
#ifndef __ASSEMBLY__
-struct davinci_uart_config {
- /* Bit field of UARTs present; bit 0 --> UART0 */
- unsigned int enabled_uarts;
-};
-extern int davinci_serial_init(struct davinci_uart_config *);
-extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate);
+extern int davinci_serial_init(struct platform_device *);
+
extern struct platform_device dm365_serial_device[];
extern struct platform_device dm355_serial_device[];
extern struct platform_device dm644x_serial_device[];
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 07948a5..c68c7a9 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -41,7 +41,6 @@
#include <mach/serial.h>
struct tnetv107x_device_info {
- struct davinci_uart_config *serial_config;
struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */
struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */
struct matrix_keypad_platform_data *keypad_config;
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 57e6150..5e93a73 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -70,54 +70,35 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
UART_DM646X_SCR_TX_WATERMARK);
}
-/* Enable UART clock and obtain its rate */
-int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
-{
- char name[16];
- struct clk *clk;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
- struct device *dev = &soc_info->serial_dev[instance].dev;
-
- sprintf(name, "uart%d", instance);
- clk = clk_get(dev, name);
- if (IS_ERR(clk)) {
- pr_err("%s:%d: failed to get UART%d clock\n",
- __func__, __LINE__, instance);
- return PTR_ERR(clk);
- }
-
- clk_prepare_enable(clk);
-
- if (rate)
- *rate = clk_get_rate(clk);
-
- return 0;
-}
-
-int __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct platform_device *serial_dev)
{
int i, ret = 0;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
struct device *dev;
struct plat_serial8250_port *p;
+ struct clk *clk;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on if not needed.
*/
- for (i = 0; soc_info->serial_dev[i].dev.platform_data != NULL; i++) {
- dev = &soc_info->serial_dev[i].dev;
+ for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) {
+ dev = &serial_dev[i].dev;
p = dev->platform_data;
- if (!(info->enabled_uarts & (1 << i)))
- continue;
- ret = platform_device_register(&soc_info->serial_dev[i]);
+ ret = platform_device_register(&serial_dev[i]);
if (ret)
continue;
- ret = davinci_serial_setup_clk(i, &p->uartclk);
- if (ret)
+ clk = clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:%d: failed to get UART%d clock\n",
+ __func__, __LINE__, i);
continue;
+ }
+
+ clk_prepare_enable(clk);
+
+ p->uartclk = clk_get_rate(clk);
if (!p->membase && p->mapbase) {
p->membase = ioremap(p->mapbase, SZ_4K);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread