From mboxrd@z Thu Jan 1 00:00:00 1970 From: c.hemp@phytec.de (Christian Hemp) Date: Wed, 29 May 2013 23:06:49 +0200 Subject: [PATCH 2/2] ARM: dts: Phytec phyFLEX-i.MX6 support In-Reply-To: <1369861609-30408-1-git-send-email-c.hemp@phytec.de> References: <1369861609-30408-1-git-send-email-c.hemp@phytec.de> Message-ID: <1369861609-30408-3-git-send-email-c.hemp@phytec.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add support for Phytec phyFLEX-i.MX6 board Signed-off-by: Christian Hemp --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-phytec-phyflex.dts | 76 ++++++++++++++++++++++++++++ 2 files changed, 77 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-phytec-phyflex.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4c58951..6ffdaa1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-sabresd.dtb \ imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ + imx6q-phytec-phyflex.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ diff --git a/arch/arm/boot/dts/imx6q-phytec-phyflex.dts b/arch/arm/boot/dts/imx6q-phytec-phyflex.dts new file mode 100644 index 0000000..9690691 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-phytec-phyflex.dts @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6"; + compatible = "phytec,phyflex-imx6", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000 + >; + }; + }; + + phyflex { + pinctrl_usdhc3_phyflex: usdhc3grp-phyflex { + fsl,pins = < + MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 0>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2 + &pinctrl_usdhc3_phyflex>; + cd-gpios = <&gpio1 27 0>; + wp-gpios = <&gpio1 29 0>; + status = "okay"; +}; + -- 1.7.9.5