From: vikas.sajjan@linaro.org (Vikas Sajjan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/6] clk: samsung: Add alias for mout_vpllsrc and reorder MUX registration for it
Date: Fri, 31 May 2013 18:01:35 +0530 [thread overview]
Message-ID: <1370003496-19288-6-git-send-email-vikas.sajjan@linaro.org> (raw)
In-Reply-To: <1370003496-19288-1-git-send-email-vikas.sajjan@linaro.org>
While trying to get rate of "mout_vpllsrc" MUX (parent) for registering the
"fout_vpll" (child), we found get rate was failing.
So this patch moves the mout_vpllsrc MUX out of the existing common list
and registers the mout_vpllsrc MUX before the PLL registrations.
Its also adds the alias for the mout_vpllsrc MUX.
Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
---
drivers/clk/samsung/clk-exynos5250.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index ddf10ca..b0e6680 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -207,6 +207,11 @@ struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = {
FFACTOR(none, "fout_bplldiv2", "fout_bpll", 1, 2, 0),
};
+struct samsung_mux_clock exynos5250_pll_pmux_clks[] __initdata = {
+ MUX_A(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1,
+ "mout_vpllsrc"),
+};
+
struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
MUX(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
MUX(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
@@ -214,7 +219,6 @@ struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
MUX(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1),
MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1),
MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1),
- MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1),
MUX(none, "sclk_vpll", mout_vpll_p, SRC_TOP2, 16, 1),
MUX(none, "sclk_epll", mout_epll_p, SRC_TOP2, 12, 1),
MUX(none, "sclk_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
@@ -490,6 +494,9 @@ void __init exynos5250_clk_init(struct device_node *np)
ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
ext_clk_match);
+ samsung_clk_register_mux(exynos5250_pll_pmux_clks,
+ ARRAY_SIZE(exynos5250_pll_pmux_clks));
+
apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll",
reg_base, NULL, 0);
mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll",
--
1.7.9.5
next prev parent reply other threads:[~2013-05-31 12:31 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-31 12:31 [PATCH v3 0/6] Add generic set_rate clk_ops for PLL35xx and PLL36xx for samsung SoCs Vikas Sajjan
2013-05-31 12:31 ` [PATCH v3 1/6] clk: samsung: Use clk->base instead of directly using clk->con0 for PLL3xxx Vikas Sajjan
2013-06-08 12:04 ` Tomasz Figa
2013-05-31 12:31 ` [PATCH v3 2/6] clk: samsung: Add support to register rate_table " Vikas Sajjan
2013-05-31 17:08 ` Doug Anderson
2013-05-31 12:31 ` [PATCH v3 3/6] clk: samsung: Add set_rate() clk_ops for PLL35xx Vikas Sajjan
2013-05-31 17:10 ` Doug Anderson
2013-06-08 12:12 ` Tomasz Figa
2013-06-12 14:51 ` Yadwinder Singh Brar
2013-05-31 12:31 ` [PATCH v3 4/6] clk: samsung: Add set_rate() clk_ops for PLL36xx Vikas Sajjan
2013-05-31 17:15 ` Doug Anderson
2013-06-08 12:17 ` Tomasz Figa
2013-06-12 6:09 ` Vikas Sajjan
2013-05-31 12:31 ` Vikas Sajjan [this message]
2013-05-31 17:20 ` [PATCH v3 5/6] clk: samsung: Add alias for mout_vpllsrc and reorder MUX registration for it Doug Anderson
2013-05-31 12:31 ` [PATCH v3 6/6] clk: samsung: Add EPLL and VPLL freq table for exynos5250 SoC Vikas Sajjan
2013-05-31 17:58 ` Doug Anderson
2013-06-03 21:06 ` [PATCH v3 0/6] Add generic set_rate clk_ops for PLL35xx and PLL36xx for samsung SoCs Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370003496-19288-6-git-send-email-vikas.sajjan@linaro.org \
--to=vikas.sajjan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).