From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND 14/15] ARM: clps711x: Add support for SYSCON driver
Date: Wed, 5 Jun 2013 09:59:22 +0400 [thread overview]
Message-ID: <1370411967-29451-15-git-send-email-shc_work@mail.ru> (raw)
In-Reply-To: <1370411967-29451-1-git-send-email-shc_work@mail.ru>
This patch adds support for SYSCON driver for CLPS711X targets.
At this time there are no users for this driver, but it is will
be used as start point to use in CLPS711X drivers and remove
<mach/xx> dependencies.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-clps711x/devices.c | 20 ++++++
arch/arm/mach-clps711x/include/mach/clps711x.h | 88 +-----------------------
drivers/mfd/syscon.c | 3 +
include/linux/mfd/syscon/clps711x.h | 94 ++++++++++++++++++++++++++
5 files changed, 120 insertions(+), 86 deletions(-)
create mode 100644 include/linux/mfd/syscon/clps711x.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2af27f7..6228676 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -371,6 +371,7 @@ config ARCH_CLPS711X
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
+ select MFD_SYSCON
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
help
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index 21161ed..856b81c 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -10,6 +10,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/sizes.h>
#include <mach/hardware.h>
@@ -42,7 +43,26 @@ static void __init clps711x_add_gpio(void)
}
}
+const struct resource clps711x_syscon_res[] __initconst = {
+ /* SYSCON1, SYSFLG1 */
+ DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON1, SZ_128),
+ /* SYSCON2, SYSFLG2 */
+ DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON2, SZ_128),
+ /* SYSCON3 */
+ DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON3, SZ_64),
+};
+
+static void __init clps711x_add_syscon(void)
+{
+ unsigned i;
+
+ for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
+ platform_device_register_simple("clps711x-syscon", i + 1,
+ &clps711x_syscon_res[i], 1);
+}
+
void __init clps711x_devices_init(void)
{
clps711x_add_gpio();
+ clps711x_add_syscon();
}
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
index 01d1b95..0286f4b 100644
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -21,6 +21,8 @@
#ifndef __MACH_CLPS711X_H
#define __MACH_CLPS711X_H
+#include <linux/mfd/syscon/clps711x.h>
+
#define CLPS711X_PHYS_BASE (0x80000000)
#define PADR (0x0000)
@@ -96,83 +98,9 @@
#define RANDID2 (0x2708)
#define RANDID3 (0x270c)
-/* common bits: SYSCON1 / SYSCON2 */
-#define SYSCON_UARTEN (1 << 8)
-
-#define SYSCON1_KBDSCAN(x) ((x) & 15)
-#define SYSCON1_KBDSCANMASK (15)
-#define SYSCON1_TC1M (1 << 4)
-#define SYSCON1_TC1S (1 << 5)
-#define SYSCON1_TC2M (1 << 6)
-#define SYSCON1_TC2S (1 << 7)
-#define SYSCON1_UART1EN SYSCON_UARTEN
-#define SYSCON1_BZTOG (1 << 9)
-#define SYSCON1_BZMOD (1 << 10)
-#define SYSCON1_DBGEN (1 << 11)
-#define SYSCON1_LCDEN (1 << 12)
-#define SYSCON1_CDENTX (1 << 13)
-#define SYSCON1_CDENRX (1 << 14)
-#define SYSCON1_SIREN (1 << 15)
-#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16)
-#define SYSCON1_ADCKSEL_MASK (3 << 16)
-#define SYSCON1_EXCKEN (1 << 18)
-#define SYSCON1_WAKEDIS (1 << 19)
-#define SYSCON1_IRTXM (1 << 20)
-
-/* common bits: SYSFLG1 / SYSFLG2 */
-#define SYSFLG_UBUSY (1 << 11)
-#define SYSFLG_URXFE (1 << 22)
-#define SYSFLG_UTXFF (1 << 23)
-
-#define SYSFLG1_MCDR (1 << 0)
-#define SYSFLG1_DCDET (1 << 1)
-#define SYSFLG1_WUDR (1 << 2)
-#define SYSFLG1_WUON (1 << 3)
-#define SYSFLG1_CTS (1 << 8)
-#define SYSFLG1_DSR (1 << 9)
-#define SYSFLG1_DCD (1 << 10)
-#define SYSFLG1_UBUSY SYSFLG_UBUSY
-#define SYSFLG1_NBFLG (1 << 12)
-#define SYSFLG1_RSTFLG (1 << 13)
-#define SYSFLG1_PFFLG (1 << 14)
-#define SYSFLG1_CLDFLG (1 << 15)
-#define SYSFLG1_URXFE SYSFLG_URXFE
-#define SYSFLG1_UTXFF SYSFLG_UTXFF
-#define SYSFLG1_CRXFE (1 << 24)
-#define SYSFLG1_CTXFF (1 << 25)
-#define SYSFLG1_SSIBUSY (1 << 26)
-#define SYSFLG1_ID (1 << 29)
-#define SYSFLG1_VERID(x) (((x) >> 30) & 3)
-#define SYSFLG1_VERID_MASK (3 << 30)
-
-#define SYSFLG2_SSRXOF (1 << 0)
-#define SYSFLG2_RESVAL (1 << 1)
-#define SYSFLG2_RESFRM (1 << 2)
-#define SYSFLG2_SS2RXFE (1 << 3)
-#define SYSFLG2_SS2TXFF (1 << 4)
-#define SYSFLG2_SS2TXUF (1 << 5)
-#define SYSFLG2_CKMODE (1 << 6)
-#define SYSFLG2_UBUSY SYSFLG_UBUSY
-#define SYSFLG2_URXFE SYSFLG_URXFE
-#define SYSFLG2_UTXFF SYSFLG_UTXFF
-
#define LCDCON_GSEN (1 << 30)
#define LCDCON_GSMD (1 << 31)
-#define SYSCON2_SERSEL (1 << 0)
-#define SYSCON2_KBD6 (1 << 1)
-#define SYSCON2_DRAMZ (1 << 2)
-#define SYSCON2_KBWEN (1 << 3)
-#define SYSCON2_SS2TXEN (1 << 4)
-#define SYSCON2_PCCARD1 (1 << 5)
-#define SYSCON2_PCCARD2 (1 << 6)
-#define SYSCON2_SS2RXEN (1 << 7)
-#define SYSCON2_UART2EN SYSCON_UARTEN
-#define SYSCON2_SS2MAEN (1 << 9)
-#define SYSCON2_OSTB (1 << 12)
-#define SYSCON2_CLKENSL (1 << 13)
-#define SYSCON2_BUZFREQ (1 << 14)
-
/* common bits: UARTDR1 / UARTDR2 */
#define UARTDR_FRMERR (1 << 8)
#define UARTDR_PARERR (1 << 9)
@@ -228,18 +156,6 @@
#define DAI64FS_MCLK256EN (1 << 3)
#define DAI64FS_LOOPBACK (1 << 5)
-#define SYSCON3_ADCCON (1 << 0)
-#define SYSCON3_CLKCTL0 (1 << 1)
-#define SYSCON3_CLKCTL1 (1 << 2)
-#define SYSCON3_DAISEL (1 << 3)
-#define SYSCON3_ADCCKNSEN (1 << 4)
-#define SYSCON3_VERSN(x) (((x) >> 5) & 7)
-#define SYSCON3_VERSN_MASK (7 << 5)
-#define SYSCON3_FASTWAKE (1 << 8)
-#define SYSCON3_DAIEN (1 << 9)
-#define SYSCON3_128FS SYSCON3_DAIEN
-#define SYSCON3_ENPD67 (1 << 10)
-
#define SDCONF_ACTIVE (1 << 10)
#define SDCONF_CLKCTL (1 << 9)
#define SDCONF_WIDTH_4 (0 << 7)
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 962a6e1..1a31512 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -159,6 +159,9 @@ static int syscon_probe(struct platform_device *pdev)
static const struct platform_device_id syscon_ids[] = {
{ "syscon", },
+#ifdef CONFIG_ARCH_CLPS711X
+ { "clps711x-syscon", },
+#endif
{ }
};
diff --git a/include/linux/mfd/syscon/clps711x.h b/include/linux/mfd/syscon/clps711x.h
new file mode 100644
index 0000000..26355ab
--- /dev/null
+++ b/include/linux/mfd/syscon/clps711x.h
@@ -0,0 +1,94 @@
+/*
+ * CLPS711X system register bits definitions
+ *
+ * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_CLPS711X_H_
+#define _LINUX_MFD_SYSCON_CLPS711X_H_
+
+#define SYSCON_OFFSET (0x00)
+#define SYSFLG_OFFSET (0x40)
+
+#define SYSCON1_KBDSCAN(x) ((x) & 15)
+#define SYSCON1_KBDSCAN_MASK (15)
+#define SYSCON1_TC1M (1 << 4)
+#define SYSCON1_TC1S (1 << 5)
+#define SYSCON1_TC2M (1 << 6)
+#define SYSCON1_TC2S (1 << 7)
+#define SYSCON1_BZTOG (1 << 9)
+#define SYSCON1_BZMOD (1 << 10)
+#define SYSCON1_DBGEN (1 << 11)
+#define SYSCON1_LCDEN (1 << 12)
+#define SYSCON1_CDENTX (1 << 13)
+#define SYSCON1_CDENRX (1 << 14)
+#define SYSCON1_SIREN (1 << 15)
+#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16)
+#define SYSCON1_ADCKSEL_MASK (3 << 16)
+#define SYSCON1_EXCKEN (1 << 18)
+#define SYSCON1_WAKEDIS (1 << 19)
+#define SYSCON1_IRTXM (1 << 20)
+
+#define SYSCON2_SERSEL (1 << 0)
+#define SYSCON2_KBD6 (1 << 1)
+#define SYSCON2_DRAMZ (1 << 2)
+#define SYSCON2_KBWEN (1 << 3)
+#define SYSCON2_SS2TXEN (1 << 4)
+#define SYSCON2_PCCARD1 (1 << 5)
+#define SYSCON2_PCCARD2 (1 << 6)
+#define SYSCON2_SS2RXEN (1 << 7)
+#define SYSCON2_SS2MAEN (1 << 9)
+#define SYSCON2_OSTB (1 << 12)
+#define SYSCON2_CLKENSL (1 << 13)
+#define SYSCON2_BUZFREQ (1 << 14)
+
+#define SYSCON3_ADCCON (1 << 0)
+#define SYSCON3_CLKCTL0 (1 << 1)
+#define SYSCON3_CLKCTL1 (1 << 2)
+#define SYSCON3_DAISEL (1 << 3)
+#define SYSCON3_ADCCKNSEN (1 << 4)
+#define SYSCON3_VERSN(x) (((x) >> 5) & 7)
+#define SYSCON3_VERSN_MASK (7 << 5)
+#define SYSCON3_FASTWAKE (1 << 8)
+#define SYSCON3_DAIEN (1 << 9)
+#define SYSCON3_128FS SYSCON3_DAIEN
+#define SYSCON3_ENPD67 (1 << 10)
+
+#define SYSCON_UARTEN (1 << 8)
+
+#define SYSFLG1_MCDR (1 << 0)
+#define SYSFLG1_DCDET (1 << 1)
+#define SYSFLG1_WUDR (1 << 2)
+#define SYSFLG1_WUON (1 << 3)
+#define SYSFLG1_CTS (1 << 8)
+#define SYSFLG1_DSR (1 << 9)
+#define SYSFLG1_DCD (1 << 10)
+#define SYSFLG1_NBFLG (1 << 12)
+#define SYSFLG1_RSTFLG (1 << 13)
+#define SYSFLG1_PFFLG (1 << 14)
+#define SYSFLG1_CLDFLG (1 << 15)
+#define SYSFLG1_CRXFE (1 << 24)
+#define SYSFLG1_CTXFF (1 << 25)
+#define SYSFLG1_SSIBUSY (1 << 26)
+#define SYSFLG1_ID (1 << 29)
+#define SYSFLG1_VERID(x) (((x) >> 30) & 3)
+#define SYSFLG1_VERID_MASK (3 << 30)
+
+#define SYSFLG2_SSRXOF (1 << 0)
+#define SYSFLG2_RESVAL (1 << 1)
+#define SYSFLG2_RESFRM (1 << 2)
+#define SYSFLG2_SS2RXFE (1 << 3)
+#define SYSFLG2_SS2TXFF (1 << 4)
+#define SYSFLG2_SS2TXUF (1 << 5)
+#define SYSFLG2_CKMODE (1 << 6)
+
+#define SYSFLG_UBUSY (1 << 11)
+#define SYSFLG_URXFE (1 << 22)
+#define SYSFLG_UTXFF (1 << 23)
+
+#endif
--
1.8.1.5
next prev parent reply other threads:[~2013-06-05 5:59 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 5:59 [PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND v2 2/3] ARM: clps711x: Re-add GPIO support Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 02/15] ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 03/15] ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 04/15] ARM: clps711x: autcpu12: Add support for NOR flash Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 05/15] ARM: clps711x: autcpu12: Special driver for handling memory is removed Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 06/15] ARM: clps711x: autcpu12: Move remaining specific definitions to board file Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 07/15] ARM: clps711x: p720t: Define PLD registers as GPIOs Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 08/15] ARM: clps711x: Move specific definitions from hardware.h to boards files Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 09/15] ARM: clps711x: Replace "arch_initcall" in common code with ".init_early" Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 10/15] ARM: clps711x: Add clocksource framework Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 11/15] ARM: clps711x: Optimize interrupt handling Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 12/15] ARM: clps711x: edb7211: Add support for I2C Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 13/15] ARM: clps711x: edb7211: Control LCD backlight via PWM Alexander Shiyan
2013-06-05 5:59 ` Alexander Shiyan [this message]
2013-06-05 5:59 ` [PATCH RESEND 15/15] ARM: clps711x: Update defconfig Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code Alexander Shiyan
2013-06-17 6:24 ` Linus Walleij
2013-06-17 6:29 ` Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND v2 2/3] ARM: clps711x: Re-add GPIO support Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND v2 3/3] GPIO: clps711x: Add DT support Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 07/15] ARM: clps711x: p720t: Define PLD registers as GPIOs Alexander Shiyan
2013-06-19 16:18 ` [PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency Arnd Bergmann
2013-06-19 16:25 ` Re[2]: " Alexander Shiyan
2013-06-19 17:59 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370411967-29451-15-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).