[PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency

[PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency

[Alexander Shiyan]

This patch removes dependency of NEED_MACH_MEMORY_H for CLPS711X-target.
Since some board may have memory holes, define ARCH_HAS_HOLES_MEMORYMODEL
for these boards.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/Kconfig                             |  1 -
 arch/arm/mach-clps711x/Kconfig               |  3 +-
 arch/arm/mach-clps711x/include/mach/memory.h | 41 ----------------------------
 3 files changed, 1 insertion(+), 44 deletions(-)
 delete mode 100644 arch/arm/mach-clps711x/include/mach/memory.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f95674a..10cdfa9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -371,7 +371,6 @@ config ARCH_CLPS711X
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 2d00165..01ad4d4 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -22,8 +22,7 @@ config ARCH_CLEP7312
 
 config ARCH_EDB7211
 	bool "EDB7211"
-	select ARCH_SELECT_MEMORY_MODEL
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
deleted file mode 100644
index fc0e028..0000000
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1).  However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-
-#define SECTION_SIZE_BITS	24
-#define MAX_PHYSMEM_BITS	32
-
-#endif
-
-- 
1.8.1.5

[PATCH RESEND v2 2/3] ARM: clps711x: Re-add GPIO support

[Alexander Shiyan]

arch_initcall was been removed from GPIO driver, so this patch
re-add support for GPIO into boards as platform_device.
Since some drivers (spi, nand, etc.) is not support deferred probe,
separate machine init calls is used in board code to make proper
loading sequence.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/Makefile         |  5 +---
 arch/arm/mach-clps711x/board-autcpu12.c |  2 ++
 arch/arm/mach-clps711x/board-cdb89712.c |  2 ++
 arch/arm/mach-clps711x/board-edb7211.c  |  7 +++++
 arch/arm/mach-clps711x/board-p720t.c    | 10 ++++---
 arch/arm/mach-clps711x/devices.c        | 48 +++++++++++++++++++++++++++++++++
 arch/arm/mach-clps711x/devices.h        | 12 +++++++++
 7 files changed, 78 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm/mach-clps711x/devices.c
 create mode 100644 arch/arm/mach-clps711x/devices.h

diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 992995a..f30ed2b 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -4,10 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= common.o
-obj-m			:=
-obj-n			:=
-obj-			:=
+obj-y				:= common.o devices.o
 
 obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index f385847..1e22cb4 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -43,6 +43,7 @@
 #include <mach/autcpu12.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
 #define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
@@ -149,6 +150,7 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = {
 
 static void __init autcpu12_init(void)
 {
+	clps711x_devices_init();
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
 	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
 					ARRAY_SIZE(autcpu12_cs8900_resource));
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index baab7da..a80ae57 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -39,6 +39,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define CDB89712_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
 #define CDB89712_CS8900_IRQ	(IRQ_EINT3)
@@ -127,6 +128,7 @@ static struct platform_device cdb89712_sram_pdev __initdata = {
 
 static void __init cdb89712_init(void)
 {
+	clps711x_devices_init();
 	platform_device_register(&cdb89712_flash_pdev);
 	platform_device_register(&cdb89712_bootrom_pdev);
 	platform_device_register(&cdb89712_sram_pdev);
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 5f928e9..e1c5573 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -29,6 +29,7 @@
 #include <mach/hardware.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define VIDEORAM_SIZE		SZ_128K
 
@@ -151,6 +152,11 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
 
 static void __init edb7211_init(void)
 {
+	clps711x_devices_init();
+}
+
+static void __init edb7211_init_late(void)
+{
 	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
 
 	platform_device_register(&edb7211_flash_pdev);
@@ -175,6 +181,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= edb7211_init,
+	.init_late	= edb7211_init_late,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 8d3ee67..48d0737 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -43,6 +43,7 @@
 #include <video/platform_lcd.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define P720T_USERLED		CLPS711X_GPIO(3, 0)
 #define P720T_NAND_CLE		CLPS711X_GPIO(4, 0)
@@ -199,6 +200,11 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
 
 static void __init p720t_init(void)
 {
+	clps711x_devices_init();
+}
+
+static void __init p720t_init_late(void)
+{
 	platform_device_register(&p720t_nand_pdev);
 	platform_device_register_data(&platform_bus, "platform-lcd", 0,
 				      &p720t_lcd_power_pdata,
@@ -207,10 +213,6 @@ static void __init p720t_init(void)
 				      &p720t_lcd_backlight_pdata,
 				      sizeof(p720t_lcd_backlight_pdata));
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-}
-
-static void __init p720t_init_late(void)
-{
 	platform_device_register_data(&platform_bus, "leds-gpio", 0,
 				      &p720t_gpio_led_pdata,
 				      sizeof(p720t_gpio_led_pdata));
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
new file mode 100644
index 0000000..21161ed
--- /dev/null
+++ b/arch/arm/mach-clps711x/devices.c
@@ -0,0 +1,48 @@
+/*
+ *  CLPS711X common devices definitions
+ *
+ *  Author: Alexander Shiyan <shc_work@mail.ru>, 2013
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+static const phys_addr_t clps711x_gpios[][2] __initconst = {
+	{ PADR, PADDR },
+	{ PBDR, PBDDR },
+	{ PCDR, PCDDR },
+	{ PDDR, PDDDR },
+	{ PEDR, PEDDR },
+};
+
+static void __init clps711x_add_gpio(void)
+{
+	unsigned i;
+	struct resource gpio_res[2];
+
+	memset(gpio_res, 0, sizeof(gpio_res));
+
+	gpio_res[0].flags = IORESOURCE_MEM;
+	gpio_res[1].flags = IORESOURCE_MEM;
+
+	for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) {
+		gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0];
+		gpio_res[0].end = gpio_res[0].start;
+		gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1];
+		gpio_res[1].end = gpio_res[1].start;
+
+		platform_device_register_simple("clps711x-gpio", i,
+						gpio_res, ARRAY_SIZE(gpio_res));
+	}
+}
+
+void __init clps711x_devices_init(void)
+{
+	clps711x_add_gpio();
+}
diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h
new file mode 100644
index 0000000..a5efc17
--- /dev/null
+++ b/arch/arm/mach-clps711x/devices.h
@@ -0,0 +1,12 @@
+/*
+ *  CLPS711X common devices definitions
+ *
+ *  Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+void clps711x_devices_init(void);
-- 
1.8.1.5

[PATCH RESEND 02/15] ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source

[Alexander Shiyan]

This clock will be used in audio subsystem. Since audio cannot work
without PLL we should indicate this.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/common.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 20ff50f..f42302e 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -301,6 +301,7 @@ void __init clps711x_timer_init(void)
 		cpu = ext;
 		bus = cpu;
 		spi = 135400;
+		pll = 0;
 	} else {
 		cpu = pll;
 		if (cpu >= 36864000)
-- 
1.8.1.5

[PATCH RESEND 03/15] ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file

[Alexander Shiyan]

We do not have driver for Up/Down digital potentiometer (DPOT), so
just define pins as GPIOs and export these pins to user.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-autcpu12.c        | 14 ++++++++++++++
 arch/arm/mach-clps711x/include/mach/autcpu12.h |  8 --------
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 1e22cb4..78b528a 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -51,12 +51,18 @@
 #define AUTCPU12_SMC_BASE	(CS1_PHYS_BASE + 0x06000000)
 #define AUTCPU12_SMC_SEL_BASE	(AUTCPU12_SMC_BASE + 0x10)
 
+/* NAND flash */
 #define AUTCPU12_MMGPIO_BASE	(CLPS711X_NR_GPIO)
 #define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
 #define AUTCPU12_SMC_RDY	CLPS711X_GPIO(1, 2)
 #define AUTCPU12_SMC_ALE	CLPS711X_GPIO(1, 3)
 #define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 3)
 
+/* LCD contrast digital potentiometer */
+#define AUTCPU12_DPOT_CS	CLPS711X_GPIO(4, 0)
+#define AUTCPU12_DPOT_CLK	CLPS711X_GPIO(4, 1)
+#define AUTCPU12_DPOT_UD	CLPS711X_GPIO(4, 2)
+
 static struct resource autcpu12_cs8900_resource[] __initdata = {
 	DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K),
 	DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ),
@@ -148,6 +154,12 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = {
 	},
 };
 
+static const struct gpio autcpu12_gpios[] __initconst = {
+	{ AUTCPU12_DPOT_CS,	GPIOF_OUT_INIT_HIGH,	"DPOT CS" },
+	{ AUTCPU12_DPOT_CLK,	GPIOF_OUT_INIT_LOW,	"DPOT CLK" },
+	{ AUTCPU12_DPOT_UD,	GPIOF_OUT_INIT_LOW,	"DPOT UD" },
+};
+
 static void __init autcpu12_init(void)
 {
 	clps711x_devices_init();
@@ -160,6 +172,8 @@ static void __init autcpu12_init(void)
 
 static void __init autcpu12_init_late(void)
 {
+	gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
+
 	if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) {
 		/* We are need both drivers to handle NAND */
 		platform_device_register(&autcpu12_nand_pdev);
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
index 0452f5f..b95d60a 100644
--- a/arch/arm/mach-clps711x/include/mach/autcpu12.h
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -48,12 +48,4 @@
 
 #define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
 
-/*
-* defines for lcd contrast 
-*/
-#define AUTCPU12_DPOT_PORT_OFFSET	PEDR
-#define	AUTCPU12_DPOT_CS		(1<<0)
-#define AUTCPU12_DPOT_CLK    		(1<<1)
-#define	AUTCPU12_DPOT_UD		(1<<2)
-
 #endif
-- 
1.8.1.5

[PATCH RESEND 04/15] ARM: clps711x: autcpu12: Add support for NOR flash

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-autcpu12.c        | 39 ++++++++++++++++++++++++--
 arch/arm/mach-clps711x/include/mach/autcpu12.h |  5 ----
 2 files changed, 37 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 78b528a..3e22d0b 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
 #include <linux/platform_device.h>
@@ -45,12 +46,17 @@
 #include "common.h"
 #include "devices.h"
 
-#define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
+/* NOR flash */
+#define AUTCPU12_FLASH_BASE	(CS0_PHYS_BASE)
 
+/* SmartMedia flash */
 #define AUTCPU12_SMC_BASE	(CS1_PHYS_BASE + 0x06000000)
 #define AUTCPU12_SMC_SEL_BASE	(AUTCPU12_SMC_BASE + 0x10)
 
+/* Ethernet */
+#define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
+#define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
+
 /* NAND flash */
 #define AUTCPU12_MMGPIO_BASE	(CLPS711X_NR_GPIO)
 #define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
@@ -160,9 +166,38 @@ static const struct gpio autcpu12_gpios[] __initconst = {
 	{ AUTCPU12_DPOT_UD,	GPIOF_OUT_INIT_LOW,	"DPOT UD" },
 };
 
+static struct mtd_partition autcpu12_flash_partitions[] = {
+	{
+		.name	= "NOR.0",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data autcpu12_flash_pdata = {
+	.width		= 4,
+	.parts		= autcpu12_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(autcpu12_flash_partitions),
+};
+
+static struct resource autcpu12_flash_resources[] __initdata = {
+	DEFINE_RES_MEM(AUTCPU12_FLASH_BASE, SZ_8M),
+};
+
+static struct platform_device autcpu12_flash_pdev __initdata = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= autcpu12_flash_resources,
+	.num_resources	= ARRAY_SIZE(autcpu12_flash_resources),
+	.dev		= {
+		.platform_data	= &autcpu12_flash_pdata,
+	},
+};
+
 static void __init autcpu12_init(void)
 {
 	clps711x_devices_init();
+	platform_device_register(&autcpu12_flash_pdev);
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
 	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
 					ARRAY_SIZE(autcpu12_cs8900_resource));
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
index b95d60a..0db6f18 100644
--- a/arch/arm/mach-clps711x/include/mach/autcpu12.h
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -20,11 +20,6 @@
 #ifndef __ASM_ARCH_AUTCPU12_H
 #define __ASM_ARCH_AUTCPU12_H
 
-/*
- * The flash bank is wired to chip select 0
- */
-#define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
-
 /* offset for device specific information structure */
 #define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
 
-- 
1.8.1.5

[PATCH RESEND 05/15] ARM: clps711x: autcpu12: Special driver for handling memory is removed

[Alexander Shiyan]

This patch provide migration to using "mtd-ram" driver instead of using
special driver for handling NVRAM memory.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-autcpu12.c        |  68 ++++++++++---
 arch/arm/mach-clps711x/include/mach/autcpu12.h |   2 -
 drivers/mtd/maps/Kconfig                       |   7 --
 drivers/mtd/maps/Makefile                      |   1 -
 drivers/mtd/maps/autcpu12-nvram.c              | 129 -------------------------
 5 files changed, 56 insertions(+), 151 deletions(-)
 delete mode 100644 drivers/mtd/maps/autcpu12-nvram.c

diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 3e22d0b..91a3ab5 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -27,6 +27,7 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
 #include <linux/platform_device.h>
@@ -49,6 +50,9 @@
 /* NOR flash */
 #define AUTCPU12_FLASH_BASE	(CS0_PHYS_BASE)
 
+/* NVRAM */
+#define AUTCPU12_NVRAM_BASE	(CS1_PHYS_BASE + 0x02000000)
+
 /* SmartMedia flash */
 #define AUTCPU12_SMC_BASE	(CS1_PHYS_BASE + 0x06000000)
 #define AUTCPU12_SMC_SEL_BASE	(AUTCPU12_SMC_BASE + 0x10)
@@ -74,17 +78,6 @@ static struct resource autcpu12_cs8900_resource[] __initdata = {
 	DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ),
 };
 
-static struct resource autcpu12_nvram_resource[] __initdata = {
-	DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"),
-};
-
-static struct platform_device autcpu12_nvram_pdev __initdata = {
-	.name		= "autcpu12_nvram",
-	.id		= -1,
-	.resource	= autcpu12_nvram_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_nvram_resource),
-};
-
 static struct resource autcpu12_nand_resource[] __initdata = {
 	DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16),
 };
@@ -194,6 +187,57 @@ static struct platform_device autcpu12_flash_pdev __initdata = {
 	},
 };
 
+static struct resource autcpu12_nvram_resource[] __initdata = {
+	DEFINE_RES_MEM(AUTCPU12_NVRAM_BASE, 0),
+};
+
+static struct platdata_mtd_ram autcpu12_nvram_pdata = {
+	.bankwidth	= 4,
+};
+
+static struct platform_device autcpu12_nvram_pdev __initdata = {
+	.name		= "mtd-ram",
+	.id		= 0,
+	.resource	= autcpu12_nvram_resource,
+	.num_resources	= ARRAY_SIZE(autcpu12_nvram_resource),
+	.dev		= {
+		.platform_data	= &autcpu12_nvram_pdata,
+	},
+};
+
+static void __init autcpu12_nvram_init(void)
+{
+	void __iomem *nvram;
+	unsigned int save[2];
+	resource_size_t nvram_size = SZ_128K;
+
+	/*
+	 * Check for 32K/128K
+	 * Read ofs 0K
+	 * Read ofs 64K
+	 * Write complement to ofs 64K
+	 * Read and check result on ofs 0K
+	 * Restore contents
+	 */
+	nvram = ioremap(autcpu12_nvram_resource[0].start, SZ_128K);
+	if (nvram) {
+		save[0] = readl(nvram + 0);
+		save[1] = readl(nvram + SZ_64K);
+		writel(~save[0], nvram + SZ_64K);
+		if (readl(nvram + 0) != save[0]) {
+			writel(save[0], nvram + 0);
+			nvram_size = SZ_32K;
+		} else
+			writel(save[1], nvram + SZ_64K);
+		iounmap(nvram);
+
+		autcpu12_nvram_resource[0].end =
+			autcpu12_nvram_resource[0].start + nvram_size - 1;
+		platform_device_register(&autcpu12_nvram_pdev);
+	} else
+		pr_err("Failed to remap NVRAM resource\n");
+}
+
 static void __init autcpu12_init(void)
 {
 	clps711x_devices_init();
@@ -202,7 +246,7 @@ static void __init autcpu12_init(void)
 	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
 					ARRAY_SIZE(autcpu12_cs8900_resource));
 	platform_device_register(&autcpu12_mmgpio_pdev);
-	platform_device_register(&autcpu12_nvram_pdev);
+	autcpu12_nvram_init();
 }
 
 static void __init autcpu12_init_late(void)
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
index 0db6f18..0e00148 100644
--- a/arch/arm/mach-clps711x/include/mach/autcpu12.h
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -31,8 +31,6 @@
 */
 #define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
 
-#define AUTCPU12_PHYS_NVRAM            	CS1_PHYS_BASE +0x02000000  /* physical */
-
 #define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
 
 #define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index bed9d58..8b27ca0 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -297,13 +297,6 @@ config MTD_IXP4XX
 	  IXDP425 and Coyote. If you have an IXP4xx based board and
 	  would like to use the flash chips on it, say 'Y'.
 
-config MTD_AUTCPU12
-	bool "NV-RAM mapping AUTCPU12 board"
-	depends on ARCH_AUTCPU12
-	help
-	  This enables access to the NV-RAM on autronix autcpu12 board.
-	  If you have such a board, say 'Y'.
-
 config MTD_IMPA7
 	tristate "JEDEC Flash device mapped on impA7"
 	depends on ARM && MTD_JEDECPROBE
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 395a124..9fdbd4b 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -32,7 +32,6 @@ obj-$(CONFIG_MTD_VMAX)		+= vmax301.o
 obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
-obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
 obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
 obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
 obj-$(CONFIG_MTD_NETtel)	+= nettel.o
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
deleted file mode 100644
index c3525d2..0000000
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * NV-RAM memory access on autcpu12
- * (C) 2002 Thomas Gleixner (gleixner at autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/err.h>
-#include <linux/sizes.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-struct autcpu12_nvram_priv {
-	struct mtd_info *mtd;
-	struct map_info map;
-};
-
-static int autcpu12_nvram_probe(struct platform_device *pdev)
-{
-	map_word tmp, save0, save1;
-	struct resource *res;
-	struct autcpu12_nvram_priv *priv;
-
-	priv = devm_kzalloc(&pdev->dev,
-			    sizeof(struct autcpu12_nvram_priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, priv);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to get memory resource\n");
-		return -ENOENT;
-	}
-
-	priv->map.bankwidth	= 4;
-	priv->map.phys		= res->start;
-	priv->map.size		= resource_size(res);
-	priv->map.virt = devm_ioremap_resource(&pdev->dev, res);
-	strcpy((char *)priv->map.name, res->name);
-	if (IS_ERR(priv->map.virt))
-		return PTR_ERR(priv->map.virt);
-
-	simple_map_init(&priv->map);
-
-	/*
-	 * Check for 32K/128K
-	 * read ofs 0
-	 * read ofs 0x10000
-	 * Write complement to ofs 0x100000
-	 * Read	and check result on ofs 0x0
-	 * Restore contents
-	 */
-	save0 = map_read(&priv->map, 0);
-	save1 = map_read(&priv->map, 0x10000);
-	tmp.x[0] = ~save0.x[0];
-	map_write(&priv->map, tmp, 0x10000);
-	tmp = map_read(&priv->map, 0);
-	/* if we find this pattern on 0x0, we have 32K size */
-	if (!map_word_equal(&priv->map, tmp, save0)) {
-		map_write(&priv->map, save0, 0x0);
-		priv->map.size = SZ_32K;
-	} else
-		map_write(&priv->map, save1, 0x10000);
-
-	priv->mtd = do_map_probe("map_ram", &priv->map);
-	if (!priv->mtd) {
-		dev_err(&pdev->dev, "probing failed\n");
-		return -ENXIO;
-	}
-
-	priv->mtd->owner	= THIS_MODULE;
-	priv->mtd->erasesize	= 16;
-	priv->mtd->dev.parent	= &pdev->dev;
-	if (!mtd_device_register(priv->mtd, NULL, 0)) {
-		dev_info(&pdev->dev,
-			 "NV-RAM device size %ldKiB registered on AUTCPU12\n",
-			 priv->map.size / SZ_1K);
-		return 0;
-	}
-
-	map_destroy(priv->mtd);
-	dev_err(&pdev->dev, "NV-RAM device addition failed\n");
-	return -ENOMEM;
-}
-
-static int autcpu12_nvram_remove(struct platform_device *pdev)
-{
-	struct autcpu12_nvram_priv *priv = platform_get_drvdata(pdev);
-
-	mtd_device_unregister(priv->mtd);
-	map_destroy(priv->mtd);
-
-	return 0;
-}
-
-static struct platform_driver autcpu12_nvram_driver = {
-	.driver		= {
-		.name	= "autcpu12_nvram",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= autcpu12_nvram_probe,
-	.remove		= autcpu12_nvram_remove,
-};
-module_platform_driver(autcpu12_nvram_driver);
-
-MODULE_AUTHOR("Thomas Gleixner");
-MODULE_DESCRIPTION("autcpu12 NVRAM map driver");
-MODULE_LICENSE("GPL");
-- 
1.8.1.5

[PATCH RESEND 06/15] ARM: clps711x: autcpu12: Move remaining specific definitions to board file

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-autcpu12.c        |  9 +++++-
 arch/arm/mach-clps711x/include/mach/autcpu12.h | 44 --------------------------
 2 files changed, 8 insertions(+), 45 deletions(-)
 delete mode 100644 arch/arm/mach-clps711x/include/mach/autcpu12.h

diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 91a3ab5..cd50314 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -42,7 +42,6 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <mach/autcpu12.h>
 
 #include "common.h"
 #include "devices.h"
@@ -50,6 +49,14 @@
 /* NOR flash */
 #define AUTCPU12_FLASH_BASE	(CS0_PHYS_BASE)
 
+/* Board specific hardware definitions */
+#define AUTCPU12_CHAR_LCD_BASE	(CS1_PHYS_BASE + 0x00000000)
+#define AUTCPU12_CSAUX1_BASE	(CS1_PHYS_BASE + 0x04000000)
+#define AUTCPU12_CAN_BASE	(CS1_PHYS_BASE + 0x08000000)
+#define AUTCPU12_TOUCH_BASE	(CS1_PHYS_BASE + 0x0a000000)
+#define AUTCPU12_IO_BASE	(CS1_PHYS_BASE + 0x0c000000)
+#define AUTCPU12_LPT_BASE	(CS1_PHYS_BASE + 0x0e000000)
+
 /* NVRAM */
 #define AUTCPU12_NVRAM_BASE	(CS1_PHYS_BASE + 0x02000000)
 
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
deleted file mode 100644
index 0e00148..0000000
--- a/arch/arm/mach-clps711x/include/mach/autcpu12.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * AUTCPU12 specific defines
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_AUTCPU12_H
-#define __ASM_ARCH_AUTCPU12_H
-
-/* offset for device specific information structure */
-#define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
-
-/* Videomemory in the internal SRAM (CS 6) */
-#define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
-
-/*
-* All special IO's are tied to CS1
-*/
-#define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
-
-#define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
-
-#define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
-
-#define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
-
-#define AUTCPU12_PHYS_IO               	CS1_PHYS_BASE +0x0C000000  /* physical */
-
-#define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
-
-#endif
-- 
1.8.1.5

[PATCH RESEND 07/15] ARM: clps711x: p720t: Define PLD registers as GPIOs

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-p720t.c         | 245 +++++++++++++++++++++------
 arch/arm/mach-clps711x/include/mach/syspld.h | 116 -------------
 2 files changed, 193 insertions(+), 168 deletions(-)
 delete mode 100644 arch/arm/mach-clps711x/include/mach/syspld.h

diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 48d0737..601ef38 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -23,10 +23,12 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/leds.h>
 #include <linux/sizes.h>
 #include <linux/backlight.h>
+#include <linux/basic_mmio_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
@@ -38,7 +40,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/syspld.h>
 
 #include <video/platform_lcd.h>
 
@@ -52,6 +53,178 @@
 
 #define P720T_NAND_BASE		(CLPS711X_SDRAM1_BASE)
 
+#define P720T_MMGPIO_BASE	(CLPS711X_NR_GPIO)
+
+#define SYSPLD_PHYS_BASE	IOMEM(CS1_PHYS_BASE)
+
+#define PLD_INT			(SYSPLD_PHYS_BASE + 0x000000)
+#define PLD_INT_MMGPIO_BASE	(P720T_MMGPIO_BASE + 0)
+#define PLD_INT_PENIRQ		(PLD_INT_MMGPIO_BASE + 5)
+#define PLD_INT_UCB_IRQ		(PLD_INT_MMGPIO_BASE + 1)
+#define PLD_INT_KBD_ATN		(PLD_INT_MMGPIO_BASE + 0) /* EINT1 */
+
+#define PLD_PWR			(SYSPLD_PHYS_BASE + 0x000004)
+#define PLD_PWR_MMGPIO_BASE	(P720T_MMGPIO_BASE + 8)
+#define PLD_PWR_EXT		(PLD_PWR_MMGPIO_BASE + 5)
+#define PLD_PWR_MODE		(PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON		(PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */
+#define PLD_S3_ON		(PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */
+#define PLD_S2_ON		(PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */
+#define PLD_S1_ON		(PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */
+
+#define PLD_KBD			(SYSPLD_PHYS_BASE + 0x000008)
+#define PLD_KBD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 16)
+#define PLD_KBD_WAKE		(PLD_KBD_MMGPIO_BASE + 1)
+#define PLD_KBD_EN		(PLD_KBD_MMGPIO_BASE + 0)
+
+#define PLD_SPI			(SYSPLD_PHYS_BASE + 0x00000c)
+#define PLD_SPI_MMGPIO_BASE	(P720T_MMGPIO_BASE + 24)
+#define PLD_SPI_EN		(PLD_SPI_MMGPIO_BASE + 0)
+
+#define PLD_IO			(SYSPLD_PHYS_BASE + 0x000010)
+#define PLD_IO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 32)
+#define PLD_IO_BOOTSEL		(PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */
+#define PLD_IO_USER		(PLD_IO_MMGPIO_BASE + 5) /* User defined switch */
+#define PLD_IO_LED3		(PLD_IO_MMGPIO_BASE + 4)
+#define PLD_IO_LED2		(PLD_IO_MMGPIO_BASE + 3)
+#define PLD_IO_LED1		(PLD_IO_MMGPIO_BASE + 2)
+#define PLD_IO_LED0		(PLD_IO_MMGPIO_BASE + 1)
+#define PLD_IO_LEDEN		(PLD_IO_MMGPIO_BASE + 0)
+
+#define PLD_IRDA		(SYSPLD_PHYS_BASE + 0x000014)
+#define PLD_IRDA_MMGPIO_BASE	(P720T_MMGPIO_BASE + 40)
+#define PLD_IRDA_EN		(PLD_IRDA_MMGPIO_BASE + 0)
+
+#define PLD_COM2		(SYSPLD_PHYS_BASE + 0x000018)
+#define PLD_COM2_MMGPIO_BASE	(P720T_MMGPIO_BASE + 48)
+#define PLD_COM2_EN		(PLD_COM2_MMGPIO_BASE + 0)
+
+#define PLD_COM1		(SYSPLD_PHYS_BASE + 0x00001c)
+#define PLD_COM1_MMGPIO_BASE	(P720T_MMGPIO_BASE + 56)
+#define PLD_COM1_EN		(PLD_COM1_MMGPIO_BASE + 0)
+
+#define PLD_AUD			(SYSPLD_PHYS_BASE + 0x000020)
+#define PLD_AUD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 64)
+#define PLD_AUD_DIV1		(PLD_AUD_MMGPIO_BASE + 6)
+#define PLD_AUD_DIV0		(PLD_AUD_MMGPIO_BASE + 5)
+#define PLD_AUD_CLK_SEL1	(PLD_AUD_MMGPIO_BASE + 4)
+#define PLD_AUD_CLK_SEL0	(PLD_AUD_MMGPIO_BASE + 3)
+#define PLD_AUD_MIC_PWR		(PLD_AUD_MMGPIO_BASE + 2)
+#define PLD_AUD_MIC_GAIN	(PLD_AUD_MMGPIO_BASE + 1)
+#define PLD_AUD_CODEC_EN	(PLD_AUD_MMGPIO_BASE + 0)
+
+#define PLD_CF			(SYSPLD_PHYS_BASE + 0x000024)
+#define PLD_CF_MMGPIO_BASE	(P720T_MMGPIO_BASE + 72)
+#define PLD_CF2_SLEEP		(PLD_CF_MMGPIO_BASE + 5)
+#define PLD_CF1_SLEEP		(PLD_CF_MMGPIO_BASE + 4)
+#define PLD_CF2_nPDREQ		(PLD_CF_MMGPIO_BASE + 3)
+#define PLD_CF1_nPDREQ		(PLD_CF_MMGPIO_BASE + 2)
+#define PLD_CF2_nIRQ		(PLD_CF_MMGPIO_BASE + 1)
+#define PLD_CF1_nIRQ		(PLD_CF_MMGPIO_BASE + 0)
+
+#define PLD_SDC			(SYSPLD_PHYS_BASE + 0x000028)
+#define PLD_SDC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 80)
+#define PLD_SDC_INT_EN		(PLD_SDC_MMGPIO_BASE + 2)
+#define PLD_SDC_WP		(PLD_SDC_MMGPIO_BASE + 1)
+#define PLD_SDC_CD		(PLD_SDC_MMGPIO_BASE + 0)
+
+#define PLD_CODEC		(SYSPLD_PHYS_BASE + 0x400000)
+#define PLD_CODEC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 88)
+#define PLD_CODEC_IRQ3		(PLD_CODEC_MMGPIO_BASE + 4)
+#define PLD_CODEC_IRQ2		(PLD_CODEC_MMGPIO_BASE + 3)
+#define PLD_CODEC_IRQ1		(PLD_CODEC_MMGPIO_BASE + 2)
+#define PLD_CODEC_EN		(PLD_CODEC_MMGPIO_BASE + 0)
+
+#define PLD_BRITE		(SYSPLD_PHYS_BASE + 0x400004)
+#define PLD_BRITE_MMGPIO_BASE	(P720T_MMGPIO_BASE + 96)
+#define PLD_BRITE_UP		(PLD_BRITE_MMGPIO_BASE + 1)
+#define PLD_BRITE_DN		(PLD_BRITE_MMGPIO_BASE + 0)
+
+#define PLD_LCDEN		(SYSPLD_PHYS_BASE + 0x400008)
+#define PLD_LCDEN_MMGPIO_BASE	(P720T_MMGPIO_BASE + 104)
+#define PLD_LCDEN_EN		(PLD_LCDEN_MMGPIO_BASE + 0)
+
+#define PLD_TCH			(SYSPLD_PHYS_BASE + 0x400010)
+#define PLD_TCH_MMGPIO_BASE	(P720T_MMGPIO_BASE + 112)
+#define PLD_TCH_PENIRQ		(PLD_TCH_MMGPIO_BASE + 1)
+#define PLD_TCH_EN		(PLD_TCH_MMGPIO_BASE + 0)
+
+#define PLD_GPIO		(SYSPLD_PHYS_BASE + 0x400014)
+#define PLD_GPIO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 120)
+#define PLD_GPIO2		(PLD_GPIO_MMGPIO_BASE + 2)
+#define PLD_GPIO1		(PLD_GPIO_MMGPIO_BASE + 1)
+#define PLD_GPIO0		(PLD_GPIO_MMGPIO_BASE + 0)
+
+static struct gpio p720t_gpios[] __initconst = {
+	{ PLD_S1_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S1_ON" },
+	{ PLD_S2_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S2_ON" },
+	{ PLD_S3_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S3_ON" },
+	{ PLD_S4_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S4_ON" },
+	{ PLD_KBD_EN,	GPIOF_OUT_INIT_LOW,	"PLD_KBD_EN" },
+	{ PLD_SPI_EN,	GPIOF_OUT_INIT_LOW,	"PLD_SPI_EN" },
+	{ PLD_IO_USER,	GPIOF_OUT_INIT_LOW,	"PLD_IO_USER" },
+	{ PLD_IO_LED0,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED0" },
+	{ PLD_IO_LED1,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED1" },
+	{ PLD_IO_LED2,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED2" },
+	{ PLD_IO_LED3,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED3" },
+	{ PLD_IO_LEDEN,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LEDEN" },
+	{ PLD_IRDA_EN,	GPIOF_OUT_INIT_LOW,	"PLD_IRDA_EN" },
+	{ PLD_COM1_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM1_EN" },
+	{ PLD_COM2_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM2_EN" },
+	{ PLD_CODEC_EN,	GPIOF_OUT_INIT_LOW,	"PLD_CODEC_EN" },
+	{ PLD_LCDEN_EN,	GPIOF_OUT_INIT_LOW,	"PLD_LCDEN_EN" },
+	{ PLD_TCH_EN,	GPIOF_OUT_INIT_LOW,	"PLD_TCH_EN" },
+	{ P720T_USERLED,GPIOF_OUT_INIT_LOW,	"USER_LED" },
+};
+
+static struct resource p720t_mmgpio_resource[] __initdata = {
+	DEFINE_RES_MEM_NAMED(0, 4, "dat"),
+};
+
+static struct bgpio_pdata p720t_mmgpio_pdata = {
+	.ngpio	= 8,
+};
+
+static struct platform_device p720t_mmgpio __initdata = {
+	.name		= "basic-mmio-gpio",
+	.id		= -1,
+	.resource	= p720t_mmgpio_resource,
+	.num_resources	= ARRAY_SIZE(p720t_mmgpio_resource),
+	.dev		= {
+		.platform_data	= &p720t_mmgpio_pdata,
+	},
+};
+
+static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase)
+{
+	p720t_mmgpio_resource[0].start = (unsigned long)addrbase;
+	p720t_mmgpio_pdata.base = gpiobase;
+
+	platform_device_register(&p720t_mmgpio);
+}
+
+static struct {
+	void __iomem	*addrbase;
+	int		gpiobase;
+} mmgpios[] __initconst = {
+	{ PLD_INT,	PLD_INT_MMGPIO_BASE },
+	{ PLD_PWR,	PLD_PWR_MMGPIO_BASE },
+	{ PLD_KBD,	PLD_KBD_MMGPIO_BASE },
+	{ PLD_SPI,	PLD_SPI_MMGPIO_BASE },
+	{ PLD_IO,	PLD_IO_MMGPIO_BASE },
+	{ PLD_IRDA,	PLD_IRDA_MMGPIO_BASE },
+	{ PLD_COM2,	PLD_COM2_MMGPIO_BASE },
+	{ PLD_COM1,	PLD_COM1_MMGPIO_BASE },
+	{ PLD_AUD,	PLD_AUD_MMGPIO_BASE },
+	{ PLD_CF,	PLD_CF_MMGPIO_BASE },
+	{ PLD_SDC,	PLD_SDC_MMGPIO_BASE },
+	{ PLD_CODEC,	PLD_CODEC_MMGPIO_BASE },
+	{ PLD_BRITE,	PLD_BRITE_MMGPIO_BASE },
+	{ PLD_LCDEN,	PLD_LCDEN_MMGPIO_BASE },
+	{ PLD_TCH,	PLD_TCH_MMGPIO_BASE },
+	{ PLD_GPIO,	PLD_GPIO_MMGPIO_BASE },
+};
+
 static struct resource p720t_nand_resource[] __initdata = {
 	DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4),
 };
@@ -93,11 +266,15 @@ static struct platform_device p720t_nand_pdev __initdata = {
 static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
 {
 	if (power) {
-		PLD_LCDEN = PLD_LCDEN_EN;
-		PLD_PWR |= PLD_S4_ON | PLD_S2_ON | PLD_S1_ON;
+		gpio_set_value(PLD_LCDEN_EN, 1);
+		gpio_set_value(PLD_S1_ON, 1);
+		gpio_set_value(PLD_S2_ON, 1);
+		gpio_set_value(PLD_S4_ON, 1);
 	} else {
-		PLD_PWR &= ~(PLD_S4_ON | PLD_S2_ON | PLD_S1_ON);
-		PLD_LCDEN = 0;
+		gpio_set_value(PLD_S1_ON, 0);
+		gpio_set_value(PLD_S2_ON, 0);
+		gpio_set_value(PLD_S4_ON, 0);
+		gpio_set_value(PLD_LCDEN_EN, 0);
 	}
 }
 
@@ -107,10 +284,7 @@ static struct plat_lcd_data p720t_lcd_power_pdata = {
 
 static void p720t_lcd_backlight_set_intensity(int intensity)
 {
-	if (intensity)
-		PLD_PWR |= PLD_S3_ON;
-	else
-		PLD_PWR = 0;
+	gpio_set_value(PLD_S3_ON, intensity);
 }
 
 static struct generic_bl_info p720t_lcd_backlight_pdata = {
@@ -120,19 +294,6 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = {
 	.set_bl_intensity	= p720t_lcd_backlight_set_intensity,
 };
 
-/*
- * Map the P720T system PLD. It occupies two address spaces:
- * 0x10000000 and 0x10400000. We map both regions as one.
- */
-static struct map_desc p720t_io_desc[] __initdata = {
-	{
-		.virtual	= SYSPLD_VIRT_BASE,
-		.pfn		= __phys_to_pfn(SYSPLD_PHYS_BASE),
-		.length		= SZ_8M,
-		.type		= MT_DEVICE,
-	},
-};
-
 static void __init
 fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
 {
@@ -158,33 +319,6 @@ fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
 	}
 }
 
-static void __init p720t_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc));
-}
-
-static void __init p720t_init_early(void)
-{
-	/*
-	 * Power down as much as possible in case we don't
-	 * have the drivers loaded.
-	 */
-	PLD_LCDEN = 0;
-	PLD_PWR  &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON);
-
-	PLD_KBD   = 0;
-	PLD_IO    = 0;
-	PLD_IRDA  = 0;
-	PLD_CODEC = 0;
-	PLD_TCH   = 0;
-	PLD_SPI   = 0;
-	if (!IS_ENABLED(CONFIG_DEBUG_LL)) {
-		PLD_COM2 = 0;
-		PLD_COM1 = 0;
-	}
-}
-
 static struct gpio_led p720t_gpio_leds[] = {
 	{
 		.name			= "User LED",
@@ -200,12 +334,20 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
 
 static void __init p720t_init(void)
 {
+	int i;
+
 	clps711x_devices_init();
+
+	for (i = 0; i < ARRAY_SIZE(mmgpios); i++)
+		p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase);
+
+	platform_device_register(&p720t_nand_pdev);
 }
 
 static void __init p720t_init_late(void)
 {
-	platform_device_register(&p720t_nand_pdev);
+	WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios)));
+
 	platform_device_register_data(&platform_bus, "platform-lcd", 0,
 				      &p720t_lcd_power_pdata,
 				      sizeof(p720t_lcd_power_pdata));
@@ -223,8 +365,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.atag_offset	= 0x100,
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_p720t,
-	.map_io		= p720t_map_io,
-	.init_early	= p720t_init_early,
+	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= p720t_init,
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
deleted file mode 100644
index 9a43315..0000000
--- a/arch/arm/mach-clps711x/include/mach/syspld.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/syspld.h
- *
- *  System Control PLD register definitions.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSPLD_H
-#define __ASM_ARCH_SYSPLD_H
-
-#define SYSPLD_PHYS_BASE	(0x10000000)
-#define SYSPLD_VIRT_BASE	IO_ADDRESS(SYSPLD_PHYS_BASE)
-
-#define SYSPLD_REG(type, off)	(*(volatile type *)(SYSPLD_VIRT_BASE + (off)))
-
-#define PLD_INT		SYSPLD_REG(u32, 0x000000)
-#define PLD_INT_PENIRQ		(1 << 5)
-#define PLD_INT_UCB_IRQ		(1 << 1)
-#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
-
-#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
-#define PLD_PWR_EXT		(1 << 5)
-#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
-#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
-#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
-#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
-
-#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
-#define PLD_KBD_WAKE		(1 << 1)
-#define PLD_KBD_EN		(1 << 0)
-
-#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
-#define PLD_SPI_EN		(1 << 0)
-
-#define PLD_IO		SYSPLD_REG(u32, 0x000010)
-#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
-#define PLD_IO_USER		(1 << 5)	/* user defined switch */
-#define PLD_IO_LED3		(1 << 4)
-#define PLD_IO_LED2		(1 << 3)
-#define PLD_IO_LED1		(1 << 2)
-#define PLD_IO_LED0		(1 << 1)
-#define PLD_IO_LEDEN		(1 << 0)
-
-#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
-#define PLD_IRDA_EN		(1 << 0)
-
-#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
-#define PLD_COM2_EN		(1 << 0)
-
-#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
-#define PLD_COM1_EN		(1 << 0)
-
-#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
-#define PLD_AUD_DIV1		(1 << 6)
-#define PLD_AUD_DIV0		(1 << 5)
-#define PLD_AUD_CLK_SEL1	(1 << 4)
-#define PLD_AUD_CLK_SEL0	(1 << 3)
-#define PLD_AUD_MIC_PWR		(1 << 2)
-#define PLD_AUD_MIC_GAIN	(1 << 1)
-#define PLD_AUD_CODEC_EN	(1 << 0)
-
-#define PLD_CF		SYSPLD_REG(u32, 0x000024)
-#define PLD_CF2_SLEEP		(1 << 5)
-#define PLD_CF1_SLEEP		(1 << 4)
-#define PLD_CF2_nPDREQ		(1 << 3)
-#define PLD_CF1_nPDREQ		(1 << 2)
-#define PLD_CF2_nIRQ		(1 << 1)
-#define PLD_CF1_nIRQ		(1 << 0)
-
-#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
-#define PLD_SDC_INT_EN		(1 << 2)
-#define PLD_SDC_WP		(1 << 1)
-#define PLD_SDC_CD		(1 << 0)
-
-#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
-
-#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
-#define PLD_CODEC_IRQ3		(1 << 4)
-#define PLD_CODEC_IRQ2		(1 << 3)
-#define PLD_CODEC_IRQ1		(1 << 2)
-#define PLD_CODEC_EN		(1 << 0)
-
-#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
-#define PLD_BRITE_UP		(1 << 1)
-#define PLD_BRITE_DN		(1 << 0)
-
-#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
-#define PLD_LCDEN_EN		(1 << 0)
-
-#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
-
-#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
-#define PLD_TCH_PENIRQ		(1 << 1)
-#define PLD_TCH_EN		(1 << 0)
-
-#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
-#define PLD_GPIO2		(1 << 2)
-#define PLD_GPIO1		(1 << 1)
-#define PLD_GPIO0		(1 << 0)
-
-#endif
-- 
1.8.1.5

[PATCH RESEND 08/15] ARM: clps711x: Move specific definitions from hardware.h to boards files

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-edb7211.c         | 8 ++++++--
 arch/arm/mach-clps711x/include/mach/hardware.h | 7 -------
 2 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index e1c5573..3ba4b9e 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -39,9 +39,13 @@
 
 #define EDB7211_FLASH0_BASE	(CS0_PHYS_BASE)
 #define EDB7211_FLASH1_BASE	(CS1_PHYS_BASE)
+
 #define EDB7211_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
 #define EDB7211_CS8900_IRQ	(IRQ_EINT3)
 
+/* The extra 8 lines of the keyboard matrix */
+#define EDB7211_EXTKBD_BASE	(CS3_PHYS_BASE)
+
 static struct resource edb7211_cs8900_resource[] __initdata = {
 	DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K),
 	DEFINE_RES_IRQ(EDB7211_CS8900_IRQ),
@@ -113,8 +117,8 @@ static struct gpio edb7211_gpios[] __initconst = {
 
 static struct map_desc edb7211_io_desc[] __initdata = {
 	{	/* Memory-mapped extra keyboard row */
-		.virtual	= IO_ADDRESS(EP7211_PHYS_EXTKBD),
-		.pfn		= __phys_to_pfn(EP7211_PHYS_EXTKBD),
+		.virtual	= IO_ADDRESS(EDB7211_EXTKBD_BASE),
+		.pfn		= __phys_to_pfn(EDB7211_EXTKBD_BASE),
 		.length		= SZ_1M,
 		.type		= MT_DEVICE,
 	},
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 2f23dd5..c5a8ea6 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -70,11 +70,4 @@
 #define CLPS711X_SDRAM0_BASE	(0xc0000000)
 #define CLPS711X_SDRAM1_BASE	(0xd0000000)
 
-#if defined (CONFIG_ARCH_EDB7211)
-
-/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */
-#define EP7211_PHYS_EXTKBD	CS3_PHYS_BASE
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
 #endif
-- 
1.8.1.5

[PATCH RESEND 09/15] ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-autcpu12.c |  1 +
 arch/arm/mach-clps711x/board-cdb89712.c |  1 +
 arch/arm/mach-clps711x/board-clep7312.c |  1 +
 arch/arm/mach-clps711x/board-edb7211.c  |  1 +
 arch/arm/mach-clps711x/board-fortunet.c |  1 +
 arch/arm/mach-clps711x/board-p720t.c    |  1 +
 arch/arm/mach-clps711x/common.c         | 10 +++-------
 arch/arm/mach-clps711x/common.h         |  1 +
 8 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index cd50314..5867aeb 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -271,6 +271,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
 	.atag_offset	= 0x20000,
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
+	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= autcpu12_init,
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index a80ae57..a9e38c6 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -141,6 +141,7 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	.atag_offset	= 0x100,
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
+	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= cdb89712_init,
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
index 014aa3c..b476424 100644
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -39,6 +39,7 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
+	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.handle_irq	= clps711x_handle_irq,
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 3ba4b9e..db804b4 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -182,6 +182,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.fixup		= fixup_edb7211,
 	.reserve	= edb7211_reserve,
 	.map_io		= edb7211_map_io,
+	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= edb7211_init,
diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c
index c5675ef..b1561e3 100644
--- a/arch/arm/mach-clps711x/board-fortunet.c
+++ b/arch/arm/mach-clps711x/board-fortunet.c
@@ -77,6 +77,7 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fortunet_fixup,
 	.map_io		= clps711x_map_io,
+	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.handle_irq	= clps711x_handle_irq,
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 601ef38..dd81b06 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -366,6 +366,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_p720t,
 	.map_io		= clps711x_map_io,
+	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= p720t_init,
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index f42302e..768d41c6 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -354,15 +354,11 @@ void clps711x_restart(char mode, const char *cmd)
 static void clps711x_idle(void)
 {
 	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov    r0, r0\n\
-	mov     r0, r0");
+	asm("mov r0, r0");
+	asm("mov r0, r0");
 }
 
-static int __init clps711x_idle_init(void)
+void __init clps711x_init_early(void)
 {
 	arm_pm_idle = clps711x_idle;
-	return 0;
 }
-
-arch_initcall(clps711x_idle_init);
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index f84a729..2a22f4c 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -13,3 +13,4 @@ extern void clps711x_init_irq(void);
 extern void clps711x_timer_init(void);
 extern void clps711x_handle_irq(struct pt_regs *regs);
 extern void clps711x_restart(char mode, const char *cmd);
+extern void clps711x_init_early(void);
-- 
1.8.1.5

[PATCH RESEND 10/15] ARM: clps711x: Add clocksource framework

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/Kconfig                |  1 +
 arch/arm/mach-clps711x/common.c | 48 ++++++++++++++++++++++++++++++++++-------
 2 files changed, 41 insertions(+), 8 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 10cdfa9..2af27f7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -367,6 +367,7 @@ config ARCH_CLPS711X
 	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 768d41c6..bd65839 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -27,12 +27,14 @@
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/clockchips.h>
+#include <linux/clocksource.h>
 #include <linux/clk-provider.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
+#include <asm/sched_clock.h>
 #include <asm/system_misc.h>
 
 #include <mach/hardware.h>
@@ -251,13 +253,32 @@ asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs)
 		handle_IRQ(fls16(irqstat) + 16, regs);
 }
 
+static u32 notrace clps711x_sched_clock_read(void)
+{
+	return ~readw_relaxed(CLPS711X_VIRT_BASE + TC1D);
+}
+
 static void clps711x_clockevent_set_mode(enum clock_event_mode mode,
 					 struct clock_event_device *evt)
 {
+	disable_irq(IRQ_TC2OI);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		enable_irq(IRQ_TC2OI);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Not supported */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		/* Left event sources disabled, no more interrupts appear */
+		break;
+	}
 }
 
 static struct clock_event_device clockevent_clps711x = {
-	.name		= "CLPS711x Clockevents",
+	.name		= "clps711x-clockevent",
 	.rating		= 300,
 	.features	= CLOCK_EVT_FEAT_PERIODIC,
 	.set_mode	= clps711x_clockevent_set_mode,
@@ -271,8 +292,8 @@ static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
 }
 
 static struct irqaction clps711x_timer_irq = {
-	.name		= "CLPS711x Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.name		= "clps711x-timer",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= clps711x_timer_interrupt,
 };
 
@@ -320,9 +341,9 @@ void __init clps711x_timer_init(void)
 		else
 			timh = 541440;
 	} else
-		timh = cpu / 144;
+		timh = DIV_ROUND_CLOSEST(cpu, 144);
 
-	timl = timh / 256;
+	timl = DIV_ROUND_CLOSEST(timh, 256);
 
 	/* All clocks are fixed */
 	add_fixed_clk(clk_pll, "pll", pll);
@@ -335,13 +356,24 @@ void __init clps711x_timer_init(void)
 
 	pr_info("CPU frequency set at %i Hz.\n", cpu);
 
+	/* Start Timer1 in free running mode (Low frequency) */
+	tmp = clps_readl(SYSCON1) & ~(SYSCON1_TC1S | SYSCON1_TC1M);
+	clps_writel(tmp, SYSCON1);
+
+	setup_sched_clock(clps711x_sched_clock_read, 16, timl);
+
+	clocksource_mmio_init(CLPS711X_VIRT_BASE + TC1D,
+			      "clps711x_clocksource", timl, 300, 16,
+			      clocksource_mmio_readw_down);
+
+	/* Set Timer2 prescaler */
 	clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D);
 
-	tmp = clps_readl(SYSCON1);
-	tmp |= SYSCON1_TC2S | SYSCON1_TC2M;
+	/* Start Timer2 in prescale mode (High frequency)*/
+	tmp = clps_readl(SYSCON1) | SYSCON1_TC2M | SYSCON1_TC2S;
 	clps_writel(tmp, SYSCON1);
 
-	clockevents_config_and_register(&clockevent_clps711x, timh, 1, 0xffff);
+	clockevents_config_and_register(&clockevent_clps711x, timh, 0, 0);
 
 	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
 }
-- 
1.8.1.5

[PATCH RESEND 11/15] ARM: clps711x: Optimize interrupt handling

[Alexander Shiyan]

This patch modify interrupt handler for processing all penging interrupts
at once.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/common.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index bd65839..f6d1746 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -215,7 +215,7 @@ void __init clps711x_init_irq(void)
 	}
 }
 
-inline u32 fls16(u32 x)
+static inline u32 fls16(u32 x)
 {
 	u32 r = 15;
 
@@ -239,18 +239,24 @@ inline u32 fls16(u32 x)
 
 asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs)
 {
-	u32 irqstat;
-	void __iomem *base = CLPS711X_VIRT_BASE;
+	do {
+		u32 irqstat;
+		void __iomem *base = CLPS711X_VIRT_BASE;
+
+		irqstat = readw_relaxed(base + INTSR1) &
+			  readw_relaxed(base + INTMR1);
+		if (irqstat)
+			handle_IRQ(fls16(irqstat), regs);
+
+		irqstat = readw_relaxed(base + INTSR2) &
+			  readw_relaxed(base + INTMR2);
+		if (irqstat) {
+			handle_IRQ(fls16(irqstat) + 16, regs);
+			continue;
+		}
 
-	irqstat = readl_relaxed(base + INTSR1) & readl_relaxed(base + INTMR1);
-	if (irqstat) {
-		handle_IRQ(fls16(irqstat), regs);
-		return;
-	}
-
-	irqstat = readl_relaxed(base + INTSR2) & readl_relaxed(base + INTMR2);
-	if (likely(irqstat))
-		handle_IRQ(fls16(irqstat) + 16, regs);
+		break;
+	} while (1);
 }
 
 static u32 notrace clps711x_sched_clock_read(void)
-- 
1.8.1.5

[PATCH RESEND 12/15] ARM: clps711x: edb7211: Add support for I2C

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-edb7211.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index db804b4..970f4e1 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/memblock.h>
 #include <linux/types.h>
+#include <linux/i2c-gpio.h>
 #include <linux/interrupt.h>
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
@@ -37,6 +38,9 @@
 #define EDB7211_LCDEN		CLPS711X_GPIO(3, 2)
 #define EDB7211_LCDBL		CLPS711X_GPIO(3, 3)
 
+#define EDB7211_I2C_SDA		CLPS711X_GPIO(3, 4)
+#define EDB7211_I2C_SCL		CLPS711X_GPIO(3, 5)
+
 #define EDB7211_FLASH0_BASE	(CS0_PHYS_BASE)
 #define EDB7211_FLASH1_BASE	(CS1_PHYS_BASE)
 
@@ -46,6 +50,12 @@
 /* The extra 8 lines of the keyboard matrix */
 #define EDB7211_EXTKBD_BASE	(CS3_PHYS_BASE)
 
+static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata = {
+	.sda_pin	= EDB7211_I2C_SDA,
+	.scl_pin	= EDB7211_I2C_SCL,
+	.scl_is_output_only = 1,
+};
+
 static struct resource edb7211_cs8900_resource[] __initdata = {
 	DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K),
 	DEFINE_RES_IRQ(EDB7211_CS8900_IRQ),
@@ -173,6 +183,9 @@ static void __init edb7211_init_late(void)
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
 	platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
 					ARRAY_SIZE(edb7211_cs8900_resource));
+	platform_device_register_data(&platform_bus, "i2c-gpio", 0,
+				      &edb7211_i2c_pdata,
+				      sizeof(edb7211_i2c_pdata));
 }
 
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
-- 
1.8.1.5

[PATCH RESEND 13/15] ARM: clps711x: edb7211: Control LCD backlight via PWM

[Alexander Shiyan]

This patch provide control LCD backlight via PWM. GPIO is used
only for switch backlight ON and OFF.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-edb7211.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 970f4e1..9dfb990 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -109,13 +109,14 @@ static struct plat_lcd_data edb7211_lcd_power_pdata = {
 
 static void edb7211_lcd_backlight_set_intensity(int intensity)
 {
-	gpio_set_value(EDB7211_LCDBL, intensity);
+	gpio_set_value(EDB7211_LCDBL, !!intensity);
+	clps_writel((clps_readl(PMPCON) & 0xf0ff) | (intensity << 8), PMPCON);
 }
 
 static struct generic_bl_info edb7211_lcd_backlight_pdata = {
 	.name			= "lcd-backlight.0",
 	.default_intensity	= 0x01,
-	.max_intensity		= 0x01,
+	.max_intensity		= 0x0f,
 	.set_bl_intensity	= edb7211_lcd_backlight_set_intensity,
 };
 
-- 
1.8.1.5

[PATCH RESEND 14/15] ARM: clps711x: Add support for SYSCON driver

[Alexander Shiyan]

This patch adds support for SYSCON driver for CLPS711X targets.
At this time there are no users for this driver, but it is will
be used as start point to use in CLPS711X drivers and remove
<mach/xx> dependencies.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/Kconfig                               |  1 +
 arch/arm/mach-clps711x/devices.c               | 20 ++++++
 arch/arm/mach-clps711x/include/mach/clps711x.h | 88 +-----------------------
 drivers/mfd/syscon.c                           |  3 +
 include/linux/mfd/syscon/clps711x.h            | 94 ++++++++++++++++++++++++++
 5 files changed, 120 insertions(+), 86 deletions(-)
 create mode 100644 include/linux/mfd/syscon/clps711x.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2af27f7..6228676 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -371,6 +371,7 @@ config ARCH_CLPS711X
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
+	select MFD_SYSCON
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	help
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index 21161ed..856b81c 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/sizes.h>
 
 #include <mach/hardware.h>
 
@@ -42,7 +43,26 @@ static void __init clps711x_add_gpio(void)
 	}
 }
 
+const struct resource clps711x_syscon_res[] __initconst = {
+	/* SYSCON1, SYSFLG1 */
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON1, SZ_128),
+	/* SYSCON2, SYSFLG2 */
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON2, SZ_128),
+	/* SYSCON3 */
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON3, SZ_64),
+};
+
+static void __init clps711x_add_syscon(void)
+{
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
+		platform_device_register_simple("clps711x-syscon", i + 1,
+						&clps711x_syscon_res[i], 1);
+}
+
 void __init clps711x_devices_init(void)
 {
 	clps711x_add_gpio();
+	clps711x_add_syscon();
 }
diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h
index 01d1b95..0286f4b 100644
--- a/arch/arm/mach-clps711x/include/mach/clps711x.h
+++ b/arch/arm/mach-clps711x/include/mach/clps711x.h
@@ -21,6 +21,8 @@
 #ifndef __MACH_CLPS711X_H
 #define __MACH_CLPS711X_H
 
+#include <linux/mfd/syscon/clps711x.h>
+
 #define CLPS711X_PHYS_BASE	(0x80000000)
 
 #define PADR		(0x0000)
@@ -96,83 +98,9 @@
 #define RANDID2		(0x2708)
 #define RANDID3		(0x270c)
 
-/* common bits: SYSCON1 / SYSCON2 */
-#define SYSCON_UARTEN		(1 << 8)
-
-#define SYSCON1_KBDSCAN(x)	((x) & 15)
-#define SYSCON1_KBDSCANMASK	(15)
-#define SYSCON1_TC1M		(1 << 4)
-#define SYSCON1_TC1S		(1 << 5)
-#define SYSCON1_TC2M		(1 << 6)
-#define SYSCON1_TC2S		(1 << 7)
-#define SYSCON1_UART1EN		SYSCON_UARTEN
-#define SYSCON1_BZTOG		(1 << 9)
-#define SYSCON1_BZMOD		(1 << 10)
-#define SYSCON1_DBGEN		(1 << 11)
-#define SYSCON1_LCDEN		(1 << 12)
-#define SYSCON1_CDENTX		(1 << 13)
-#define SYSCON1_CDENRX		(1 << 14)
-#define SYSCON1_SIREN		(1 << 15)
-#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
-#define SYSCON1_ADCKSEL_MASK	(3 << 16)
-#define SYSCON1_EXCKEN		(1 << 18)
-#define SYSCON1_WAKEDIS		(1 << 19)
-#define SYSCON1_IRTXM		(1 << 20)
-
-/* common bits: SYSFLG1 / SYSFLG2 */
-#define SYSFLG_UBUSY		(1 << 11)
-#define SYSFLG_URXFE		(1 << 22)
-#define SYSFLG_UTXFF		(1 << 23)
-
-#define SYSFLG1_MCDR		(1 << 0)
-#define SYSFLG1_DCDET		(1 << 1)
-#define SYSFLG1_WUDR		(1 << 2)
-#define SYSFLG1_WUON		(1 << 3)
-#define SYSFLG1_CTS		(1 << 8)
-#define SYSFLG1_DSR		(1 << 9)
-#define SYSFLG1_DCD		(1 << 10)
-#define SYSFLG1_UBUSY		SYSFLG_UBUSY
-#define SYSFLG1_NBFLG		(1 << 12)
-#define SYSFLG1_RSTFLG		(1 << 13)
-#define SYSFLG1_PFFLG		(1 << 14)
-#define SYSFLG1_CLDFLG		(1 << 15)
-#define SYSFLG1_URXFE		SYSFLG_URXFE
-#define SYSFLG1_UTXFF		SYSFLG_UTXFF
-#define SYSFLG1_CRXFE		(1 << 24)
-#define SYSFLG1_CTXFF		(1 << 25)
-#define SYSFLG1_SSIBUSY		(1 << 26)
-#define SYSFLG1_ID		(1 << 29)
-#define SYSFLG1_VERID(x)	(((x) >> 30) & 3)
-#define SYSFLG1_VERID_MASK	(3 << 30)
-
-#define SYSFLG2_SSRXOF		(1 << 0)
-#define SYSFLG2_RESVAL		(1 << 1)
-#define SYSFLG2_RESFRM		(1 << 2)
-#define SYSFLG2_SS2RXFE		(1 << 3)
-#define SYSFLG2_SS2TXFF		(1 << 4)
-#define SYSFLG2_SS2TXUF		(1 << 5)
-#define SYSFLG2_CKMODE		(1 << 6)
-#define SYSFLG2_UBUSY		SYSFLG_UBUSY
-#define SYSFLG2_URXFE		SYSFLG_URXFE
-#define SYSFLG2_UTXFF		SYSFLG_UTXFF
-
 #define LCDCON_GSEN		(1 << 30)
 #define LCDCON_GSMD		(1 << 31)
 
-#define SYSCON2_SERSEL		(1 << 0)
-#define SYSCON2_KBD6		(1 << 1)
-#define SYSCON2_DRAMZ		(1 << 2)
-#define SYSCON2_KBWEN		(1 << 3)
-#define SYSCON2_SS2TXEN		(1 << 4)
-#define SYSCON2_PCCARD1		(1 << 5)
-#define SYSCON2_PCCARD2		(1 << 6)
-#define SYSCON2_SS2RXEN		(1 << 7)
-#define SYSCON2_UART2EN		SYSCON_UARTEN
-#define SYSCON2_SS2MAEN		(1 << 9)
-#define SYSCON2_OSTB		(1 << 12)
-#define SYSCON2_CLKENSL		(1 << 13)
-#define SYSCON2_BUZFREQ		(1 << 14)
-
 /* common bits: UARTDR1 / UARTDR2 */
 #define UARTDR_FRMERR		(1 << 8)
 #define UARTDR_PARERR		(1 << 9)
@@ -228,18 +156,6 @@
 #define DAI64FS_MCLK256EN	(1 << 3)
 #define DAI64FS_LOOPBACK	(1 << 5)
 
-#define SYSCON3_ADCCON		(1 << 0)
-#define SYSCON3_CLKCTL0		(1 << 1)
-#define SYSCON3_CLKCTL1		(1 << 2)
-#define SYSCON3_DAISEL		(1 << 3)
-#define SYSCON3_ADCCKNSEN	(1 << 4)
-#define SYSCON3_VERSN(x)	(((x) >> 5) & 7)
-#define SYSCON3_VERSN_MASK	(7 << 5)
-#define SYSCON3_FASTWAKE	(1 << 8)
-#define SYSCON3_DAIEN		(1 << 9)
-#define SYSCON3_128FS		SYSCON3_DAIEN
-#define SYSCON3_ENPD67		(1 << 10)
-
 #define SDCONF_ACTIVE		(1 << 10)
 #define SDCONF_CLKCTL		(1 << 9)
 #define SDCONF_WIDTH_4		(0 << 7)
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 962a6e1..1a31512 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -159,6 +159,9 @@ static int syscon_probe(struct platform_device *pdev)
 
 static const struct platform_device_id syscon_ids[] = {
 	{ "syscon", },
+#ifdef CONFIG_ARCH_CLPS711X
+	{ "clps711x-syscon", },
+#endif
 	{ }
 };
 
diff --git a/include/linux/mfd/syscon/clps711x.h b/include/linux/mfd/syscon/clps711x.h
new file mode 100644
index 0000000..26355ab
--- /dev/null
+++ b/include/linux/mfd/syscon/clps711x.h
@@ -0,0 +1,94 @@
+/*
+ *  CLPS711X system register bits definitions
+ *
+ *  Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_CLPS711X_H_
+#define _LINUX_MFD_SYSCON_CLPS711X_H_
+
+#define SYSCON_OFFSET		(0x00)
+#define SYSFLG_OFFSET		(0x40)
+
+#define SYSCON1_KBDSCAN(x)	((x) & 15)
+#define SYSCON1_KBDSCAN_MASK	(15)
+#define SYSCON1_TC1M		(1 << 4)
+#define SYSCON1_TC1S		(1 << 5)
+#define SYSCON1_TC2M		(1 << 6)
+#define SYSCON1_TC2S		(1 << 7)
+#define SYSCON1_BZTOG		(1 << 9)
+#define SYSCON1_BZMOD		(1 << 10)
+#define SYSCON1_DBGEN		(1 << 11)
+#define SYSCON1_LCDEN		(1 << 12)
+#define SYSCON1_CDENTX		(1 << 13)
+#define SYSCON1_CDENRX		(1 << 14)
+#define SYSCON1_SIREN		(1 << 15)
+#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
+#define SYSCON1_ADCKSEL_MASK	(3 << 16)
+#define SYSCON1_EXCKEN		(1 << 18)
+#define SYSCON1_WAKEDIS		(1 << 19)
+#define SYSCON1_IRTXM		(1 << 20)
+
+#define SYSCON2_SERSEL		(1 << 0)
+#define SYSCON2_KBD6		(1 << 1)
+#define SYSCON2_DRAMZ		(1 << 2)
+#define SYSCON2_KBWEN		(1 << 3)
+#define SYSCON2_SS2TXEN		(1 << 4)
+#define SYSCON2_PCCARD1		(1 << 5)
+#define SYSCON2_PCCARD2		(1 << 6)
+#define SYSCON2_SS2RXEN		(1 << 7)
+#define SYSCON2_SS2MAEN		(1 << 9)
+#define SYSCON2_OSTB		(1 << 12)
+#define SYSCON2_CLKENSL		(1 << 13)
+#define SYSCON2_BUZFREQ		(1 << 14)
+
+#define SYSCON3_ADCCON		(1 << 0)
+#define SYSCON3_CLKCTL0		(1 << 1)
+#define SYSCON3_CLKCTL1		(1 << 2)
+#define SYSCON3_DAISEL		(1 << 3)
+#define SYSCON3_ADCCKNSEN	(1 << 4)
+#define SYSCON3_VERSN(x)	(((x) >> 5) & 7)
+#define SYSCON3_VERSN_MASK	(7 << 5)
+#define SYSCON3_FASTWAKE	(1 << 8)
+#define SYSCON3_DAIEN		(1 << 9)
+#define SYSCON3_128FS		SYSCON3_DAIEN
+#define SYSCON3_ENPD67		(1 << 10)
+
+#define SYSCON_UARTEN		(1 << 8)
+
+#define SYSFLG1_MCDR		(1 << 0)
+#define SYSFLG1_DCDET		(1 << 1)
+#define SYSFLG1_WUDR		(1 << 2)
+#define SYSFLG1_WUON		(1 << 3)
+#define SYSFLG1_CTS		(1 << 8)
+#define SYSFLG1_DSR		(1 << 9)
+#define SYSFLG1_DCD		(1 << 10)
+#define SYSFLG1_NBFLG		(1 << 12)
+#define SYSFLG1_RSTFLG		(1 << 13)
+#define SYSFLG1_PFFLG		(1 << 14)
+#define SYSFLG1_CLDFLG		(1 << 15)
+#define SYSFLG1_CRXFE		(1 << 24)
+#define SYSFLG1_CTXFF		(1 << 25)
+#define SYSFLG1_SSIBUSY		(1 << 26)
+#define SYSFLG1_ID		(1 << 29)
+#define SYSFLG1_VERID(x)	(((x) >> 30) & 3)
+#define SYSFLG1_VERID_MASK	(3 << 30)
+
+#define SYSFLG2_SSRXOF		(1 << 0)
+#define SYSFLG2_RESVAL		(1 << 1)
+#define SYSFLG2_RESFRM		(1 << 2)
+#define SYSFLG2_SS2RXFE		(1 << 3)
+#define SYSFLG2_SS2TXFF		(1 << 4)
+#define SYSFLG2_SS2TXUF		(1 << 5)
+#define SYSFLG2_CKMODE		(1 << 6)
+
+#define SYSFLG_UBUSY		(1 << 11)
+#define SYSFLG_URXFE		(1 << 22)
+#define SYSFLG_UTXFF		(1 << 23)
+
+#endif
-- 
1.8.1.5

[PATCH RESEND 15/15] ARM: clps711x: Update defconfig

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/configs/clps711x_defconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 1cd94c3..9e8c831 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -31,21 +31,18 @@ CONFIG_EP7211_DONGLE=y
 # CONFIG_WIRELESS is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_AUTCPU12=y
 CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPIO=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
 CONFIG_CS89x0=y
 CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -63,7 +60,11 @@ CONFIG_CS89x0_PLATFORM=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
+CONFIG_SPI_CLPS711X=y
+CONFIG_GPIO_CLPS711X=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
@@ -87,4 +88,3 @@ CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_CRC32 is not set
-- 
1.8.1.5

[PATCH RESEND v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Alexander Shiyan]

This patch provides rewritten driver for CLPS711X GPIO which uses
generic GPIO code.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 drivers/gpio/Kconfig         |   5 +-
 drivers/gpio/gpio-clps711x.c | 226 +++++++++++--------------------------------
 2 files changed, 63 insertions(+), 168 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 30d89ed..b0d967b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -109,8 +109,11 @@ config GPIO_MAX730X
 comment "Memory mapped GPIO drivers:"
 
 config GPIO_CLPS711X
-	def_bool y
+	tristate "CLPS711X GPIO support"
 	depends on ARCH_CLPS711X
+	select GPIO_GENERIC
+	help
+	  Say yes here to support GPIO on CLPS711X SoCs.
 
 config GPIO_GENERIC_PLATFORM
 	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index ce63b75..6ce8a8c 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -1,7 +1,7 @@
 /*
  *  CLPS711X GPIO driver
  *
- *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *  Copyright (C) 2012,2013 Alexander Shiyan <shc_work@mail.ru>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -9,191 +9,83 @@
  * (at your option) any later version.
  */
 
-#include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/basic_mmio_gpio.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-
-#define CLPS711X_GPIO_PORTS	5
-#define CLPS711X_GPIO_NAME	"gpio-clps711x"
-
-struct clps711x_gpio {
-	struct gpio_chip	chip[CLPS711X_GPIO_PORTS];
-	spinlock_t		lock;
-};
-
-static void __iomem *clps711x_ports[] = {
-	CLPS711X_VIRT_BASE + PADR,
-	CLPS711X_VIRT_BASE + PBDR,
-	CLPS711X_VIRT_BASE + PCDR,
-	CLPS711X_VIRT_BASE + PDDR,
-	CLPS711X_VIRT_BASE + PEDR,
-};
-
-static void __iomem *clps711x_pdirs[] = {
-	CLPS711X_VIRT_BASE + PADDR,
-	CLPS711X_VIRT_BASE + PBDDR,
-	CLPS711X_VIRT_BASE + PCDDR,
-	CLPS711X_VIRT_BASE + PDDDR,
-	CLPS711X_VIRT_BASE + PEDDR,
-};
-
-#define clps711x_port(x)	clps711x_ports[x->base / 8]
-#define clps711x_pdir(x)	clps711x_pdirs[x->base / 8]
-
-static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset)
+static int clps711x_gpio_probe(struct platform_device *pdev)
 {
-	return !!(readb(clps711x_port(chip)) & (1 << offset));
-}
+	void __iomem *dat, *dir;
+	struct bgpio_chip *bgc;
+	struct resource *res;
+	int err, id = pdev->id;
 
-static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset,
-			      int value)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	if ((id < 0) || (id > 4))
+		return -ENODEV;
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-}
-
-static int gpio_clps711x_dir_in(struct gpio_chip *chip, unsigned offset)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
-
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-
-	return 0;
-}
+	bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
+	if (!bgc)
+		return -ENOMEM;
 
-static int gpio_clps711x_dir_out(struct gpio_chip *chip, unsigned offset,
-				 int value)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dat = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dat))
+		return PTR_ERR(dat);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	dir = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+
+	switch (id) {
+	case 3:
+		/* PORTD is inverted logic for direction register */
+		err = bgpio_init(bgc, &pdev->dev, 1, dat, NULL, NULL,
+				 NULL, dir, 0);
+		break;
+	default:
+		err = bgpio_init(bgc, &pdev->dev, 1, dat, NULL, NULL,
+				 dir, NULL, 0);
+		break;
+	}
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	if (err)
+		return err;
 
-	return 0;
-}
-
-static int gpio_clps711x_dir_in_inv(struct gpio_chip *chip, unsigned offset)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	switch (id) {
+	case 4:
+		/* PORTE is 3 lines only */
+		bgc->gc.ngpio = 3;
+		break;
+	default:
+		break;
+	}
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	bgc->gc.base = id * 8;
+	platform_set_drvdata(pdev, bgc);
 
-	return 0;
+	return gpiochip_add(&bgc->gc);
 }
 
-static int gpio_clps711x_dir_out_inv(struct gpio_chip *chip, unsigned offset,
-				     int value)
+static int clps711x_gpio_remove(struct platform_device *pdev)
 {
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	struct bgpio_chip *bgc = platform_get_drvdata(pdev);
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-
-	return 0;
+	return bgpio_remove(bgc);
 }
 
-static struct {
-	char	*name;
-	int	nr;
-	int	inv_dir;
-} clps711x_gpio_ports[] __initconst = {
-	{ "PORTA", 8, 0, },
-	{ "PORTB", 8, 0, },
-	{ "PORTC", 8, 0, },
-	{ "PORTD", 8, 1, },
-	{ "PORTE", 3, 0, },
+static struct platform_driver clps711x_gpio_driver = {
+	.driver	= {
+		.name	= "clps711x-gpio",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= clps711x_gpio_probe,
+	.remove	= clps711x_gpio_remove,
 };
+module_platform_driver(clps711x_gpio_driver);
 
-static int __init gpio_clps711x_init(void)
-{
-	int i;
-	struct platform_device *pdev;
-	struct clps711x_gpio *gpio;
-
-	pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0);
-	if (!pdev) {
-		pr_err("Cannot create platform device: %s\n",
-		       CLPS711X_GPIO_NAME);
-		return -ENOMEM;
-	}
-
-	platform_device_add(pdev);
-
-	gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio),
-			    GFP_KERNEL);
-	if (!gpio) {
-		dev_err(&pdev->dev, "GPIO allocating memory error\n");
-		platform_device_unregister(pdev);
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(pdev, gpio);
-
-	spin_lock_init(&gpio->lock);
-
-	for (i = 0; i < CLPS711X_GPIO_PORTS; i++) {
-		gpio->chip[i].owner		= THIS_MODULE;
-		gpio->chip[i].dev		= &pdev->dev;
-		gpio->chip[i].label		= clps711x_gpio_ports[i].name;
-		gpio->chip[i].base		= i * 8;
-		gpio->chip[i].ngpio		= clps711x_gpio_ports[i].nr;
-		gpio->chip[i].get		= gpio_clps711x_get;
-		gpio->chip[i].set		= gpio_clps711x_set;
-		if (!clps711x_gpio_ports[i].inv_dir) {
-			gpio->chip[i].direction_input = gpio_clps711x_dir_in;
-			gpio->chip[i].direction_output = gpio_clps711x_dir_out;
-		} else {
-			gpio->chip[i].direction_input = gpio_clps711x_dir_in_inv;
-			gpio->chip[i].direction_output = gpio_clps711x_dir_out_inv;
-		}
-		WARN_ON(gpiochip_add(&gpio->chip[i]));
-	}
-
-	dev_info(&pdev->dev, "GPIO driver initialized\n");
-
-	return 0;
-}
-arch_initcall(gpio_clps711x_init);
-
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
 MODULE_DESCRIPTION("CLPS711X GPIO driver");
-- 
1.8.1.5

[PATCH RESEND v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Linus Walleij]

On Wed, Jun 5, 2013 at 7:59 AM, Alexander Shiyan <shc_work@mail.ru> wrote:

> This patch provides rewritten driver for CLPS711X GPIO which uses
> generic GPIO code.
>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

Alexander are you sending this through ARM SoC?

Alternatively I can carry this in the GPIO tree if there are
no conflicts elsewhere in this next merge window.

Yours,
Linus Walleij

Re: [PATCH RESEND v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Alexander Shiyan]

> On Wed, Jun 5, 2013 at 7:59 AM, Alexander Shiyan <shc_work@mail.ru> wrote:
> 
> > This patch provides rewritten driver for CLPS711X GPIO which uses
> > generic GPIO code.
> >
> > Acked-by: Arnd Bergmann <arnd@arndb.de>
> > Acked-by: Linus Walleij <linus.walleij@linaro.org>
> > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> 
> Alexander are you sending this through ARM SoC?
> 
> Alternatively I can carry this in the GPIO tree if there are
> no conflicts elsewhere in this next merge window.

This series already in arm-soc.
https://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git/log/?h=clps711x/soc
Thanks.

---

[PATCH RESEND v2 2/3] ARM: clps711x: Re-add GPIO support

[Alexander Shiyan]

arch_initcall was been removed from GPIO driver, so this patch
re-add support for GPIO into boards as platform_device.
Since some drivers (spi, nand, etc.) is not support deferred probe,
separate machine init calls is used in board code to make proper
loading sequence.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/Makefile         |  5 +---
 arch/arm/mach-clps711x/board-autcpu12.c |  2 ++
 arch/arm/mach-clps711x/board-cdb89712.c |  2 ++
 arch/arm/mach-clps711x/board-edb7211.c  |  7 +++++
 arch/arm/mach-clps711x/board-p720t.c    | 10 ++++---
 arch/arm/mach-clps711x/devices.c        | 48 +++++++++++++++++++++++++++++++++
 arch/arm/mach-clps711x/devices.h        | 12 +++++++++
 7 files changed, 78 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm/mach-clps711x/devices.c
 create mode 100644 arch/arm/mach-clps711x/devices.h

diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 992995a..f30ed2b 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -4,10 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= common.o
-obj-m			:=
-obj-n			:=
-obj-			:=
+obj-y				:= common.o devices.o
 
 obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index f385847..1e22cb4 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -43,6 +43,7 @@
 #include <mach/autcpu12.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
 #define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
@@ -149,6 +150,7 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = {
 
 static void __init autcpu12_init(void)
 {
+	clps711x_devices_init();
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
 	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
 					ARRAY_SIZE(autcpu12_cs8900_resource));
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index baab7da..a80ae57 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -39,6 +39,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define CDB89712_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
 #define CDB89712_CS8900_IRQ	(IRQ_EINT3)
@@ -127,6 +128,7 @@ static struct platform_device cdb89712_sram_pdev __initdata = {
 
 static void __init cdb89712_init(void)
 {
+	clps711x_devices_init();
 	platform_device_register(&cdb89712_flash_pdev);
 	platform_device_register(&cdb89712_bootrom_pdev);
 	platform_device_register(&cdb89712_sram_pdev);
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 5f928e9..e1c5573 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -29,6 +29,7 @@
 #include <mach/hardware.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define VIDEORAM_SIZE		SZ_128K
 
@@ -151,6 +152,11 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
 
 static void __init edb7211_init(void)
 {
+	clps711x_devices_init();
+}
+
+static void __init edb7211_init_late(void)
+{
 	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
 
 	platform_device_register(&edb7211_flash_pdev);
@@ -175,6 +181,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= edb7211_init,
+	.init_late	= edb7211_init_late,
 	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 8d3ee67..48d0737 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -43,6 +43,7 @@
 #include <video/platform_lcd.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define P720T_USERLED		CLPS711X_GPIO(3, 0)
 #define P720T_NAND_CLE		CLPS711X_GPIO(4, 0)
@@ -199,6 +200,11 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
 
 static void __init p720t_init(void)
 {
+	clps711x_devices_init();
+}
+
+static void __init p720t_init_late(void)
+{
 	platform_device_register(&p720t_nand_pdev);
 	platform_device_register_data(&platform_bus, "platform-lcd", 0,
 				      &p720t_lcd_power_pdata,
@@ -207,10 +213,6 @@ static void __init p720t_init(void)
 				      &p720t_lcd_backlight_pdata,
 				      sizeof(p720t_lcd_backlight_pdata));
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-}
-
-static void __init p720t_init_late(void)
-{
 	platform_device_register_data(&platform_bus, "leds-gpio", 0,
 				      &p720t_gpio_led_pdata,
 				      sizeof(p720t_gpio_led_pdata));
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
new file mode 100644
index 0000000..21161ed
--- /dev/null
+++ b/arch/arm/mach-clps711x/devices.c
@@ -0,0 +1,48 @@
+/*
+ *  CLPS711X common devices definitions
+ *
+ *  Author: Alexander Shiyan <shc_work@mail.ru>, 2013
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+static const phys_addr_t clps711x_gpios[][2] __initconst = {
+	{ PADR, PADDR },
+	{ PBDR, PBDDR },
+	{ PCDR, PCDDR },
+	{ PDDR, PDDDR },
+	{ PEDR, PEDDR },
+};
+
+static void __init clps711x_add_gpio(void)
+{
+	unsigned i;
+	struct resource gpio_res[2];
+
+	memset(gpio_res, 0, sizeof(gpio_res));
+
+	gpio_res[0].flags = IORESOURCE_MEM;
+	gpio_res[1].flags = IORESOURCE_MEM;
+
+	for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) {
+		gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0];
+		gpio_res[0].end = gpio_res[0].start;
+		gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1];
+		gpio_res[1].end = gpio_res[1].start;
+
+		platform_device_register_simple("clps711x-gpio", i,
+						gpio_res, ARRAY_SIZE(gpio_res));
+	}
+}
+
+void __init clps711x_devices_init(void)
+{
+	clps711x_add_gpio();
+}
diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h
new file mode 100644
index 0000000..a5efc17
--- /dev/null
+++ b/arch/arm/mach-clps711x/devices.h
@@ -0,0 +1,12 @@
+/*
+ *  CLPS711X common devices definitions
+ *
+ *  Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+void clps711x_devices_init(void);
-- 
1.8.1.5

[PATCH RESEND v2 3/3] GPIO: clps711x: Add DT support

[Alexander Shiyan]

Add DT support to the CLPS711X GPIO driver.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 .../devicetree/bindings/gpio/gpio-clps711x.txt     | 28 ++++++++++++++++++++++
 drivers/gpio/gpio-clps711x.c                       | 14 ++++++++---
 2 files changed, 39 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-clps711x.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
new file mode 100644
index 0000000..e0d0446
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
@@ -0,0 +1,28 @@
+Cirrus Logic CLPS711X GPIO controller
+
+Required properties:
+- compatible: Should be "cirrus,clps711x-gpio"
+- reg: Physical base GPIO controller registers location and length.
+  There should be two registers, first is DATA register, the second
+  is DIRECTION.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+    0 = active high
+    1 = active low
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+	gpio0 = &porta;
+};
+
+porta: gpio at 80000000 {
+	compatible = "cirrus,clps711x-gpio";
+	reg = <0x80000000 0x1>, <0x80000040 0x1>;
+	gpio-controller;
+	#gpio-cells = <2>;
+};
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index 6ce8a8c..0edaf2c 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -17,10 +17,11 @@
 
 static int clps711x_gpio_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	void __iomem *dat, *dir;
 	struct bgpio_chip *bgc;
 	struct resource *res;
-	int err, id = pdev->id;
+	int err, id = np ? of_alias_get_id(np, "gpio") : pdev->id;
 
 	if ((id < 0) || (id > 4))
 		return -ENODEV;
@@ -76,10 +77,17 @@ static int clps711x_gpio_remove(struct platform_device *pdev)
 	return bgpio_remove(bgc);
 }
 
+static const struct of_device_id clps711x_gpio_ids[] = {
+	{ .compatible = "cirrus,clps711x-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_gpio_ids);
+
 static struct platform_driver clps711x_gpio_driver = {
 	.driver	= {
-		.name	= "clps711x-gpio",
-		.owner	= THIS_MODULE,
+		.name		= "clps711x-gpio",
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(clps711x_gpio_ids),
 	},
 	.probe	= clps711x_gpio_probe,
 	.remove	= clps711x_gpio_remove,
-- 
1.8.1.5

[PATCH RESEND 07/15] ARM: clps711x: p720t: Define PLD registers as GPIOs

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-clps711x/board-p720t.c         | 245 +++++++++++++++++++++------
 arch/arm/mach-clps711x/include/mach/syspld.h | 116 -------------
 2 files changed, 193 insertions(+), 168 deletions(-)
 delete mode 100644 arch/arm/mach-clps711x/include/mach/syspld.h

diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 48d0737..601ef38 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -23,10 +23,12 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/leds.h>
 #include <linux/sizes.h>
 #include <linux/backlight.h>
+#include <linux/basic_mmio_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
@@ -38,7 +40,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/syspld.h>
 
 #include <video/platform_lcd.h>
 
@@ -52,6 +53,178 @@
 
 #define P720T_NAND_BASE		(CLPS711X_SDRAM1_BASE)
 
+#define P720T_MMGPIO_BASE	(CLPS711X_NR_GPIO)
+
+#define SYSPLD_PHYS_BASE	IOMEM(CS1_PHYS_BASE)
+
+#define PLD_INT			(SYSPLD_PHYS_BASE + 0x000000)
+#define PLD_INT_MMGPIO_BASE	(P720T_MMGPIO_BASE + 0)
+#define PLD_INT_PENIRQ		(PLD_INT_MMGPIO_BASE + 5)
+#define PLD_INT_UCB_IRQ		(PLD_INT_MMGPIO_BASE + 1)
+#define PLD_INT_KBD_ATN		(PLD_INT_MMGPIO_BASE + 0) /* EINT1 */
+
+#define PLD_PWR			(SYSPLD_PHYS_BASE + 0x000004)
+#define PLD_PWR_MMGPIO_BASE	(P720T_MMGPIO_BASE + 8)
+#define PLD_PWR_EXT		(PLD_PWR_MMGPIO_BASE + 5)
+#define PLD_PWR_MODE		(PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON		(PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */
+#define PLD_S3_ON		(PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */
+#define PLD_S2_ON		(PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */
+#define PLD_S1_ON		(PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */
+
+#define PLD_KBD			(SYSPLD_PHYS_BASE + 0x000008)
+#define PLD_KBD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 16)
+#define PLD_KBD_WAKE		(PLD_KBD_MMGPIO_BASE + 1)
+#define PLD_KBD_EN		(PLD_KBD_MMGPIO_BASE + 0)
+
+#define PLD_SPI			(SYSPLD_PHYS_BASE + 0x00000c)
+#define PLD_SPI_MMGPIO_BASE	(P720T_MMGPIO_BASE + 24)
+#define PLD_SPI_EN		(PLD_SPI_MMGPIO_BASE + 0)
+
+#define PLD_IO			(SYSPLD_PHYS_BASE + 0x000010)
+#define PLD_IO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 32)
+#define PLD_IO_BOOTSEL		(PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */
+#define PLD_IO_USER		(PLD_IO_MMGPIO_BASE + 5) /* User defined switch */
+#define PLD_IO_LED3		(PLD_IO_MMGPIO_BASE + 4)
+#define PLD_IO_LED2		(PLD_IO_MMGPIO_BASE + 3)
+#define PLD_IO_LED1		(PLD_IO_MMGPIO_BASE + 2)
+#define PLD_IO_LED0		(PLD_IO_MMGPIO_BASE + 1)
+#define PLD_IO_LEDEN		(PLD_IO_MMGPIO_BASE + 0)
+
+#define PLD_IRDA		(SYSPLD_PHYS_BASE + 0x000014)
+#define PLD_IRDA_MMGPIO_BASE	(P720T_MMGPIO_BASE + 40)
+#define PLD_IRDA_EN		(PLD_IRDA_MMGPIO_BASE + 0)
+
+#define PLD_COM2		(SYSPLD_PHYS_BASE + 0x000018)
+#define PLD_COM2_MMGPIO_BASE	(P720T_MMGPIO_BASE + 48)
+#define PLD_COM2_EN		(PLD_COM2_MMGPIO_BASE + 0)
+
+#define PLD_COM1		(SYSPLD_PHYS_BASE + 0x00001c)
+#define PLD_COM1_MMGPIO_BASE	(P720T_MMGPIO_BASE + 56)
+#define PLD_COM1_EN		(PLD_COM1_MMGPIO_BASE + 0)
+
+#define PLD_AUD			(SYSPLD_PHYS_BASE + 0x000020)
+#define PLD_AUD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 64)
+#define PLD_AUD_DIV1		(PLD_AUD_MMGPIO_BASE + 6)
+#define PLD_AUD_DIV0		(PLD_AUD_MMGPIO_BASE + 5)
+#define PLD_AUD_CLK_SEL1	(PLD_AUD_MMGPIO_BASE + 4)
+#define PLD_AUD_CLK_SEL0	(PLD_AUD_MMGPIO_BASE + 3)
+#define PLD_AUD_MIC_PWR		(PLD_AUD_MMGPIO_BASE + 2)
+#define PLD_AUD_MIC_GAIN	(PLD_AUD_MMGPIO_BASE + 1)
+#define PLD_AUD_CODEC_EN	(PLD_AUD_MMGPIO_BASE + 0)
+
+#define PLD_CF			(SYSPLD_PHYS_BASE + 0x000024)
+#define PLD_CF_MMGPIO_BASE	(P720T_MMGPIO_BASE + 72)
+#define PLD_CF2_SLEEP		(PLD_CF_MMGPIO_BASE + 5)
+#define PLD_CF1_SLEEP		(PLD_CF_MMGPIO_BASE + 4)
+#define PLD_CF2_nPDREQ		(PLD_CF_MMGPIO_BASE + 3)
+#define PLD_CF1_nPDREQ		(PLD_CF_MMGPIO_BASE + 2)
+#define PLD_CF2_nIRQ		(PLD_CF_MMGPIO_BASE + 1)
+#define PLD_CF1_nIRQ		(PLD_CF_MMGPIO_BASE + 0)
+
+#define PLD_SDC			(SYSPLD_PHYS_BASE + 0x000028)
+#define PLD_SDC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 80)
+#define PLD_SDC_INT_EN		(PLD_SDC_MMGPIO_BASE + 2)
+#define PLD_SDC_WP		(PLD_SDC_MMGPIO_BASE + 1)
+#define PLD_SDC_CD		(PLD_SDC_MMGPIO_BASE + 0)
+
+#define PLD_CODEC		(SYSPLD_PHYS_BASE + 0x400000)
+#define PLD_CODEC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 88)
+#define PLD_CODEC_IRQ3		(PLD_CODEC_MMGPIO_BASE + 4)
+#define PLD_CODEC_IRQ2		(PLD_CODEC_MMGPIO_BASE + 3)
+#define PLD_CODEC_IRQ1		(PLD_CODEC_MMGPIO_BASE + 2)
+#define PLD_CODEC_EN		(PLD_CODEC_MMGPIO_BASE + 0)
+
+#define PLD_BRITE		(SYSPLD_PHYS_BASE + 0x400004)
+#define PLD_BRITE_MMGPIO_BASE	(P720T_MMGPIO_BASE + 96)
+#define PLD_BRITE_UP		(PLD_BRITE_MMGPIO_BASE + 1)
+#define PLD_BRITE_DN		(PLD_BRITE_MMGPIO_BASE + 0)
+
+#define PLD_LCDEN		(SYSPLD_PHYS_BASE + 0x400008)
+#define PLD_LCDEN_MMGPIO_BASE	(P720T_MMGPIO_BASE + 104)
+#define PLD_LCDEN_EN		(PLD_LCDEN_MMGPIO_BASE + 0)
+
+#define PLD_TCH			(SYSPLD_PHYS_BASE + 0x400010)
+#define PLD_TCH_MMGPIO_BASE	(P720T_MMGPIO_BASE + 112)
+#define PLD_TCH_PENIRQ		(PLD_TCH_MMGPIO_BASE + 1)
+#define PLD_TCH_EN		(PLD_TCH_MMGPIO_BASE + 0)
+
+#define PLD_GPIO		(SYSPLD_PHYS_BASE + 0x400014)
+#define PLD_GPIO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 120)
+#define PLD_GPIO2		(PLD_GPIO_MMGPIO_BASE + 2)
+#define PLD_GPIO1		(PLD_GPIO_MMGPIO_BASE + 1)
+#define PLD_GPIO0		(PLD_GPIO_MMGPIO_BASE + 0)
+
+static struct gpio p720t_gpios[] __initconst = {
+	{ PLD_S1_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S1_ON" },
+	{ PLD_S2_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S2_ON" },
+	{ PLD_S3_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S3_ON" },
+	{ PLD_S4_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S4_ON" },
+	{ PLD_KBD_EN,	GPIOF_OUT_INIT_LOW,	"PLD_KBD_EN" },
+	{ PLD_SPI_EN,	GPIOF_OUT_INIT_LOW,	"PLD_SPI_EN" },
+	{ PLD_IO_USER,	GPIOF_OUT_INIT_LOW,	"PLD_IO_USER" },
+	{ PLD_IO_LED0,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED0" },
+	{ PLD_IO_LED1,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED1" },
+	{ PLD_IO_LED2,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED2" },
+	{ PLD_IO_LED3,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED3" },
+	{ PLD_IO_LEDEN,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LEDEN" },
+	{ PLD_IRDA_EN,	GPIOF_OUT_INIT_LOW,	"PLD_IRDA_EN" },
+	{ PLD_COM1_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM1_EN" },
+	{ PLD_COM2_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM2_EN" },
+	{ PLD_CODEC_EN,	GPIOF_OUT_INIT_LOW,	"PLD_CODEC_EN" },
+	{ PLD_LCDEN_EN,	GPIOF_OUT_INIT_LOW,	"PLD_LCDEN_EN" },
+	{ PLD_TCH_EN,	GPIOF_OUT_INIT_LOW,	"PLD_TCH_EN" },
+	{ P720T_USERLED,GPIOF_OUT_INIT_LOW,	"USER_LED" },
+};
+
+static struct resource p720t_mmgpio_resource[] __initdata = {
+	DEFINE_RES_MEM_NAMED(0, 4, "dat"),
+};
+
+static struct bgpio_pdata p720t_mmgpio_pdata = {
+	.ngpio	= 8,
+};
+
+static struct platform_device p720t_mmgpio __initdata = {
+	.name		= "basic-mmio-gpio",
+	.id		= -1,
+	.resource	= p720t_mmgpio_resource,
+	.num_resources	= ARRAY_SIZE(p720t_mmgpio_resource),
+	.dev		= {
+		.platform_data	= &p720t_mmgpio_pdata,
+	},
+};
+
+static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase)
+{
+	p720t_mmgpio_resource[0].start = (unsigned long)addrbase;
+	p720t_mmgpio_pdata.base = gpiobase;
+
+	platform_device_register(&p720t_mmgpio);
+}
+
+static struct {
+	void __iomem	*addrbase;
+	int		gpiobase;
+} mmgpios[] __initconst = {
+	{ PLD_INT,	PLD_INT_MMGPIO_BASE },
+	{ PLD_PWR,	PLD_PWR_MMGPIO_BASE },
+	{ PLD_KBD,	PLD_KBD_MMGPIO_BASE },
+	{ PLD_SPI,	PLD_SPI_MMGPIO_BASE },
+	{ PLD_IO,	PLD_IO_MMGPIO_BASE },
+	{ PLD_IRDA,	PLD_IRDA_MMGPIO_BASE },
+	{ PLD_COM2,	PLD_COM2_MMGPIO_BASE },
+	{ PLD_COM1,	PLD_COM1_MMGPIO_BASE },
+	{ PLD_AUD,	PLD_AUD_MMGPIO_BASE },
+	{ PLD_CF,	PLD_CF_MMGPIO_BASE },
+	{ PLD_SDC,	PLD_SDC_MMGPIO_BASE },
+	{ PLD_CODEC,	PLD_CODEC_MMGPIO_BASE },
+	{ PLD_BRITE,	PLD_BRITE_MMGPIO_BASE },
+	{ PLD_LCDEN,	PLD_LCDEN_MMGPIO_BASE },
+	{ PLD_TCH,	PLD_TCH_MMGPIO_BASE },
+	{ PLD_GPIO,	PLD_GPIO_MMGPIO_BASE },
+};
+
 static struct resource p720t_nand_resource[] __initdata = {
 	DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4),
 };
@@ -93,11 +266,15 @@ static struct platform_device p720t_nand_pdev __initdata = {
 static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
 {
 	if (power) {
-		PLD_LCDEN = PLD_LCDEN_EN;
-		PLD_PWR |= PLD_S4_ON | PLD_S2_ON | PLD_S1_ON;
+		gpio_set_value(PLD_LCDEN_EN, 1);
+		gpio_set_value(PLD_S1_ON, 1);
+		gpio_set_value(PLD_S2_ON, 1);
+		gpio_set_value(PLD_S4_ON, 1);
 	} else {
-		PLD_PWR &= ~(PLD_S4_ON | PLD_S2_ON | PLD_S1_ON);
-		PLD_LCDEN = 0;
+		gpio_set_value(PLD_S1_ON, 0);
+		gpio_set_value(PLD_S2_ON, 0);
+		gpio_set_value(PLD_S4_ON, 0);
+		gpio_set_value(PLD_LCDEN_EN, 0);
 	}
 }
 
@@ -107,10 +284,7 @@ static struct plat_lcd_data p720t_lcd_power_pdata = {
 
 static void p720t_lcd_backlight_set_intensity(int intensity)
 {
-	if (intensity)
-		PLD_PWR |= PLD_S3_ON;
-	else
-		PLD_PWR = 0;
+	gpio_set_value(PLD_S3_ON, intensity);
 }
 
 static struct generic_bl_info p720t_lcd_backlight_pdata = {
@@ -120,19 +294,6 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = {
 	.set_bl_intensity	= p720t_lcd_backlight_set_intensity,
 };
 
-/*
- * Map the P720T system PLD. It occupies two address spaces:
- * 0x10000000 and 0x10400000. We map both regions as one.
- */
-static struct map_desc p720t_io_desc[] __initdata = {
-	{
-		.virtual	= SYSPLD_VIRT_BASE,
-		.pfn		= __phys_to_pfn(SYSPLD_PHYS_BASE),
-		.length		= SZ_8M,
-		.type		= MT_DEVICE,
-	},
-};
-
 static void __init
 fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
 {
@@ -158,33 +319,6 @@ fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
 	}
 }
 
-static void __init p720t_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc));
-}
-
-static void __init p720t_init_early(void)
-{
-	/*
-	 * Power down as much as possible in case we don't
-	 * have the drivers loaded.
-	 */
-	PLD_LCDEN = 0;
-	PLD_PWR  &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON);
-
-	PLD_KBD   = 0;
-	PLD_IO    = 0;
-	PLD_IRDA  = 0;
-	PLD_CODEC = 0;
-	PLD_TCH   = 0;
-	PLD_SPI   = 0;
-	if (!IS_ENABLED(CONFIG_DEBUG_LL)) {
-		PLD_COM2 = 0;
-		PLD_COM1 = 0;
-	}
-}
-
 static struct gpio_led p720t_gpio_leds[] = {
 	{
 		.name			= "User LED",
@@ -200,12 +334,20 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
 
 static void __init p720t_init(void)
 {
+	int i;
+
 	clps711x_devices_init();
+
+	for (i = 0; i < ARRAY_SIZE(mmgpios); i++)
+		p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase);
+
+	platform_device_register(&p720t_nand_pdev);
 }
 
 static void __init p720t_init_late(void)
 {
-	platform_device_register(&p720t_nand_pdev);
+	WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios)));
+
 	platform_device_register_data(&platform_bus, "platform-lcd", 0,
 				      &p720t_lcd_power_pdata,
 				      sizeof(p720t_lcd_power_pdata));
@@ -223,8 +365,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.atag_offset	= 0x100,
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_p720t,
-	.map_io		= p720t_map_io,
-	.init_early	= p720t_init_early,
+	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= p720t_init,
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
deleted file mode 100644
index 9a43315..0000000
--- a/arch/arm/mach-clps711x/include/mach/syspld.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/syspld.h
- *
- *  System Control PLD register definitions.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSPLD_H
-#define __ASM_ARCH_SYSPLD_H
-
-#define SYSPLD_PHYS_BASE	(0x10000000)
-#define SYSPLD_VIRT_BASE	IO_ADDRESS(SYSPLD_PHYS_BASE)
-
-#define SYSPLD_REG(type, off)	(*(volatile type *)(SYSPLD_VIRT_BASE + (off)))
-
-#define PLD_INT		SYSPLD_REG(u32, 0x000000)
-#define PLD_INT_PENIRQ		(1 << 5)
-#define PLD_INT_UCB_IRQ		(1 << 1)
-#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
-
-#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
-#define PLD_PWR_EXT		(1 << 5)
-#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
-#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
-#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
-#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
-
-#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
-#define PLD_KBD_WAKE		(1 << 1)
-#define PLD_KBD_EN		(1 << 0)
-
-#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
-#define PLD_SPI_EN		(1 << 0)
-
-#define PLD_IO		SYSPLD_REG(u32, 0x000010)
-#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
-#define PLD_IO_USER		(1 << 5)	/* user defined switch */
-#define PLD_IO_LED3		(1 << 4)
-#define PLD_IO_LED2		(1 << 3)
-#define PLD_IO_LED1		(1 << 2)
-#define PLD_IO_LED0		(1 << 1)
-#define PLD_IO_LEDEN		(1 << 0)
-
-#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
-#define PLD_IRDA_EN		(1 << 0)
-
-#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
-#define PLD_COM2_EN		(1 << 0)
-
-#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
-#define PLD_COM1_EN		(1 << 0)
-
-#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
-#define PLD_AUD_DIV1		(1 << 6)
-#define PLD_AUD_DIV0		(1 << 5)
-#define PLD_AUD_CLK_SEL1	(1 << 4)
-#define PLD_AUD_CLK_SEL0	(1 << 3)
-#define PLD_AUD_MIC_PWR		(1 << 2)
-#define PLD_AUD_MIC_GAIN	(1 << 1)
-#define PLD_AUD_CODEC_EN	(1 << 0)
-
-#define PLD_CF		SYSPLD_REG(u32, 0x000024)
-#define PLD_CF2_SLEEP		(1 << 5)
-#define PLD_CF1_SLEEP		(1 << 4)
-#define PLD_CF2_nPDREQ		(1 << 3)
-#define PLD_CF1_nPDREQ		(1 << 2)
-#define PLD_CF2_nIRQ		(1 << 1)
-#define PLD_CF1_nIRQ		(1 << 0)
-
-#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
-#define PLD_SDC_INT_EN		(1 << 2)
-#define PLD_SDC_WP		(1 << 1)
-#define PLD_SDC_CD		(1 << 0)
-
-#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
-
-#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
-#define PLD_CODEC_IRQ3		(1 << 4)
-#define PLD_CODEC_IRQ2		(1 << 3)
-#define PLD_CODEC_IRQ1		(1 << 2)
-#define PLD_CODEC_EN		(1 << 0)
-
-#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
-#define PLD_BRITE_UP		(1 << 1)
-#define PLD_BRITE_DN		(1 << 0)
-
-#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
-#define PLD_LCDEN_EN		(1 << 0)
-
-#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
-
-#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
-#define PLD_TCH_PENIRQ		(1 << 1)
-#define PLD_TCH_EN		(1 << 0)
-
-#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
-#define PLD_GPIO2		(1 << 2)
-#define PLD_GPIO1		(1 << 1)
-#define PLD_GPIO0		(1 << 0)
-
-#endif
-- 
1.8.1.5

[PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency

[Arnd Bergmann]

Hi Alexander,

I'm having trouble applying these. Can you say which base you used
and in which order to apply the two series?

	Arnd

Re[2]: [PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency

[Alexander Shiyan]

> I'm having trouble applying these. Can you say which base you used
> and in which order to apply the two series?

Afaik this is already in the arm-soc by Olof.
See clps711x/soc branch.
Thanks.

---

[PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency

[Arnd Bergmann]

On Wednesday 19 June 2013, Alexander Shiyan wrote:
> > I'm having trouble applying these. Can you say which base you used
> > and in which order to apply the two series?
> 
> Afaik this is already in the arm-soc by Olof.

Yes, you are right. It's harder to track what has gone in for
standaline patches, so I assumed these would be different.

Thanks for the quick confirmation.

	Arnd

[PATCH 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency

[Alexander Shiyan]

This patch removes dependency of NEED_MACH_MEMORY_H for CLPS711X-target.
Since some board may have memory holes, define ARCH_HAS_HOLES_MEMORYMODEL
for these boards.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/Kconfig                             |  1 -
 arch/arm/mach-clps711x/Kconfig               |  3 +-
 arch/arm/mach-clps711x/include/mach/memory.h | 41 ----------------------------
 3 files changed, 1 insertion(+), 44 deletions(-)
 delete mode 100644 arch/arm/mach-clps711x/include/mach/memory.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f95674a..10cdfa9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -371,7 +371,6 @@ config ARCH_CLPS711X
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 2d00165..01ad4d4 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -22,8 +22,7 @@ config ARCH_CLEP7312
 
 config ARCH_EDB7211
 	bool "EDB7211"
-	select ARCH_SELECT_MEMORY_MODEL
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
deleted file mode 100644
index fc0e028..0000000
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1).  However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-
-#define SECTION_SIZE_BITS	24
-#define MAX_PHYSMEM_BITS	32
-
-#endif
-
-- 
1.8.1.5

[PATCH RESEND v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code

[Alexander Shiyan]

This patch provides rewritten driver for CLPS711X GPIO which uses
generic GPIO code.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 drivers/gpio/Kconfig         |   5 +-
 drivers/gpio/gpio-clps711x.c | 226 +++++++++++--------------------------------
 2 files changed, 63 insertions(+), 168 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 30d89ed..b0d967b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -109,8 +109,11 @@ config GPIO_MAX730X
 comment "Memory mapped GPIO drivers:"
 
 config GPIO_CLPS711X
-	def_bool y
+	tristate "CLPS711X GPIO support"
 	depends on ARCH_CLPS711X
+	select GPIO_GENERIC
+	help
+	  Say yes here to support GPIO on CLPS711X SoCs.
 
 config GPIO_GENERIC_PLATFORM
 	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index ce63b75..6ce8a8c 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -1,7 +1,7 @@
 /*
  *  CLPS711X GPIO driver
  *
- *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *  Copyright (C) 2012,2013 Alexander Shiyan <shc_work@mail.ru>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -9,191 +9,83 @@
  * (at your option) any later version.
  */
 
-#include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/basic_mmio_gpio.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
-
-#define CLPS711X_GPIO_PORTS	5
-#define CLPS711X_GPIO_NAME	"gpio-clps711x"
-
-struct clps711x_gpio {
-	struct gpio_chip	chip[CLPS711X_GPIO_PORTS];
-	spinlock_t		lock;
-};
-
-static void __iomem *clps711x_ports[] = {
-	CLPS711X_VIRT_BASE + PADR,
-	CLPS711X_VIRT_BASE + PBDR,
-	CLPS711X_VIRT_BASE + PCDR,
-	CLPS711X_VIRT_BASE + PDDR,
-	CLPS711X_VIRT_BASE + PEDR,
-};
-
-static void __iomem *clps711x_pdirs[] = {
-	CLPS711X_VIRT_BASE + PADDR,
-	CLPS711X_VIRT_BASE + PBDDR,
-	CLPS711X_VIRT_BASE + PCDDR,
-	CLPS711X_VIRT_BASE + PDDDR,
-	CLPS711X_VIRT_BASE + PEDDR,
-};
-
-#define clps711x_port(x)	clps711x_ports[x->base / 8]
-#define clps711x_pdir(x)	clps711x_pdirs[x->base / 8]
-
-static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset)
+static int clps711x_gpio_probe(struct platform_device *pdev)
 {
-	return !!(readb(clps711x_port(chip)) & (1 << offset));
-}
+	void __iomem *dat, *dir;
+	struct bgpio_chip *bgc;
+	struct resource *res;
+	int err, id = pdev->id;
 
-static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset,
-			      int value)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	if ((id < 0) || (id > 4))
+		return -ENODEV;
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-}
-
-static int gpio_clps711x_dir_in(struct gpio_chip *chip, unsigned offset)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
-
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-
-	return 0;
-}
+	bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
+	if (!bgc)
+		return -ENOMEM;
 
-static int gpio_clps711x_dir_out(struct gpio_chip *chip, unsigned offset,
-				 int value)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dat = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dat))
+		return PTR_ERR(dat);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	dir = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+
+	switch (id) {
+	case 3:
+		/* PORTD is inverted logic for direction register */
+		err = bgpio_init(bgc, &pdev->dev, 1, dat, NULL, NULL,
+				 NULL, dir, 0);
+		break;
+	default:
+		err = bgpio_init(bgc, &pdev->dev, 1, dat, NULL, NULL,
+				 dir, NULL, 0);
+		break;
+	}
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	if (err)
+		return err;
 
-	return 0;
-}
-
-static int gpio_clps711x_dir_in_inv(struct gpio_chip *chip, unsigned offset)
-{
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	switch (id) {
+	case 4:
+		/* PORTE is 3 lines only */
+		bgc->gc.ngpio = 3;
+		break;
+	default:
+		break;
+	}
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
+	bgc->gc.base = id * 8;
+	platform_set_drvdata(pdev, bgc);
 
-	return 0;
+	return gpiochip_add(&bgc->gc);
 }
 
-static int gpio_clps711x_dir_out_inv(struct gpio_chip *chip, unsigned offset,
-				     int value)
+static int clps711x_gpio_remove(struct platform_device *pdev)
 {
-	int tmp;
-	unsigned long flags;
-	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+	struct bgpio_chip *bgc = platform_get_drvdata(pdev);
 
-	spin_lock_irqsave(&gpio->lock, flags);
-	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
-	writeb(tmp, clps711x_pdir(chip));
-	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
-	if (value)
-		tmp |= 1 << offset;
-	writeb(tmp, clps711x_port(chip));
-	spin_unlock_irqrestore(&gpio->lock, flags);
-
-	return 0;
+	return bgpio_remove(bgc);
 }
 
-static struct {
-	char	*name;
-	int	nr;
-	int	inv_dir;
-} clps711x_gpio_ports[] __initconst = {
-	{ "PORTA", 8, 0, },
-	{ "PORTB", 8, 0, },
-	{ "PORTC", 8, 0, },
-	{ "PORTD", 8, 1, },
-	{ "PORTE", 3, 0, },
+static struct platform_driver clps711x_gpio_driver = {
+	.driver	= {
+		.name	= "clps711x-gpio",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= clps711x_gpio_probe,
+	.remove	= clps711x_gpio_remove,
 };
+module_platform_driver(clps711x_gpio_driver);
 
-static int __init gpio_clps711x_init(void)
-{
-	int i;
-	struct platform_device *pdev;
-	struct clps711x_gpio *gpio;
-
-	pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0);
-	if (!pdev) {
-		pr_err("Cannot create platform device: %s\n",
-		       CLPS711X_GPIO_NAME);
-		return -ENOMEM;
-	}
-
-	platform_device_add(pdev);
-
-	gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio),
-			    GFP_KERNEL);
-	if (!gpio) {
-		dev_err(&pdev->dev, "GPIO allocating memory error\n");
-		platform_device_unregister(pdev);
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(pdev, gpio);
-
-	spin_lock_init(&gpio->lock);
-
-	for (i = 0; i < CLPS711X_GPIO_PORTS; i++) {
-		gpio->chip[i].owner		= THIS_MODULE;
-		gpio->chip[i].dev		= &pdev->dev;
-		gpio->chip[i].label		= clps711x_gpio_ports[i].name;
-		gpio->chip[i].base		= i * 8;
-		gpio->chip[i].ngpio		= clps711x_gpio_ports[i].nr;
-		gpio->chip[i].get		= gpio_clps711x_get;
-		gpio->chip[i].set		= gpio_clps711x_set;
-		if (!clps711x_gpio_ports[i].inv_dir) {
-			gpio->chip[i].direction_input = gpio_clps711x_dir_in;
-			gpio->chip[i].direction_output = gpio_clps711x_dir_out;
-		} else {
-			gpio->chip[i].direction_input = gpio_clps711x_dir_in_inv;
-			gpio->chip[i].direction_output = gpio_clps711x_dir_out_inv;
-		}
-		WARN_ON(gpiochip_add(&gpio->chip[i]));
-	}
-
-	dev_info(&pdev->dev, "GPIO driver initialized\n");
-
-	return 0;
-}
-arch_initcall(gpio_clps711x_init);
-
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
 MODULE_DESCRIPTION("CLPS711X GPIO driver");
-- 
1.8.1.5