From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v2 2/3] ARM: clps711x: Re-add GPIO support
Date: Wed, 5 Jun 2013 09:59:09 +0400 [thread overview]
Message-ID: <1370411967-29451-2-git-send-email-shc_work@mail.ru> (raw)
In-Reply-To: <1370411967-29451-1-git-send-email-shc_work@mail.ru>
arch_initcall was been removed from GPIO driver, so this patch
re-add support for GPIO into boards as platform_device.
Since some drivers (spi, nand, etc.) is not support deferred probe,
separate machine init calls is used in board code to make proper
loading sequence.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/mach-clps711x/Makefile | 5 +---
arch/arm/mach-clps711x/board-autcpu12.c | 2 ++
arch/arm/mach-clps711x/board-cdb89712.c | 2 ++
arch/arm/mach-clps711x/board-edb7211.c | 7 +++++
arch/arm/mach-clps711x/board-p720t.c | 10 ++++---
arch/arm/mach-clps711x/devices.c | 48 +++++++++++++++++++++++++++++++++
arch/arm/mach-clps711x/devices.h | 12 +++++++++
7 files changed, 78 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/mach-clps711x/devices.c
create mode 100644 arch/arm/mach-clps711x/devices.h
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 992995a..f30ed2b 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -4,10 +4,7 @@
# Object file lists.
-obj-y := common.o
-obj-m :=
-obj-n :=
-obj- :=
+obj-y := common.o devices.o
obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o
obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index f385847..1e22cb4 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -43,6 +43,7 @@
#include <mach/autcpu12.h>
#include "common.h"
+#include "devices.h"
#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300)
#define AUTCPU12_CS8900_IRQ (IRQ_EINT3)
@@ -149,6 +150,7 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = {
static void __init autcpu12_init(void)
{
+ clps711x_devices_init();
platform_device_register_simple("video-clps711x", 0, NULL, 0);
platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
ARRAY_SIZE(autcpu12_cs8900_resource));
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index baab7da..a80ae57 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -39,6 +39,7 @@
#include <asm/mach/map.h>
#include "common.h"
+#include "devices.h"
#define CDB89712_CS8900_BASE (CS2_PHYS_BASE + 0x300)
#define CDB89712_CS8900_IRQ (IRQ_EINT3)
@@ -127,6 +128,7 @@ static struct platform_device cdb89712_sram_pdev __initdata = {
static void __init cdb89712_init(void)
{
+ clps711x_devices_init();
platform_device_register(&cdb89712_flash_pdev);
platform_device_register(&cdb89712_bootrom_pdev);
platform_device_register(&cdb89712_sram_pdev);
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 5f928e9..e1c5573 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -29,6 +29,7 @@
#include <mach/hardware.h>
#include "common.h"
+#include "devices.h"
#define VIDEORAM_SIZE SZ_128K
@@ -151,6 +152,11 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
static void __init edb7211_init(void)
{
+ clps711x_devices_init();
+}
+
+static void __init edb7211_init_late(void)
+{
gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
platform_device_register(&edb7211_flash_pdev);
@@ -175,6 +181,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
.init_irq = clps711x_init_irq,
.init_time = clps711x_timer_init,
.init_machine = edb7211_init,
+ .init_late = edb7211_init_late,
.handle_irq = clps711x_handle_irq,
.restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 8d3ee67..48d0737 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -43,6 +43,7 @@
#include <video/platform_lcd.h>
#include "common.h"
+#include "devices.h"
#define P720T_USERLED CLPS711X_GPIO(3, 0)
#define P720T_NAND_CLE CLPS711X_GPIO(4, 0)
@@ -199,6 +200,11 @@ static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
static void __init p720t_init(void)
{
+ clps711x_devices_init();
+}
+
+static void __init p720t_init_late(void)
+{
platform_device_register(&p720t_nand_pdev);
platform_device_register_data(&platform_bus, "platform-lcd", 0,
&p720t_lcd_power_pdata,
@@ -207,10 +213,6 @@ static void __init p720t_init(void)
&p720t_lcd_backlight_pdata,
sizeof(p720t_lcd_backlight_pdata));
platform_device_register_simple("video-clps711x", 0, NULL, 0);
-}
-
-static void __init p720t_init_late(void)
-{
platform_device_register_data(&platform_bus, "leds-gpio", 0,
&p720t_gpio_led_pdata,
sizeof(p720t_gpio_led_pdata));
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
new file mode 100644
index 0000000..21161ed
--- /dev/null
+++ b/arch/arm/mach-clps711x/devices.c
@@ -0,0 +1,48 @@
+/*
+ * CLPS711X common devices definitions
+ *
+ * Author: Alexander Shiyan <shc_work@mail.ru>, 2013
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+static const phys_addr_t clps711x_gpios[][2] __initconst = {
+ { PADR, PADDR },
+ { PBDR, PBDDR },
+ { PCDR, PCDDR },
+ { PDDR, PDDDR },
+ { PEDR, PEDDR },
+};
+
+static void __init clps711x_add_gpio(void)
+{
+ unsigned i;
+ struct resource gpio_res[2];
+
+ memset(gpio_res, 0, sizeof(gpio_res));
+
+ gpio_res[0].flags = IORESOURCE_MEM;
+ gpio_res[1].flags = IORESOURCE_MEM;
+
+ for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) {
+ gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0];
+ gpio_res[0].end = gpio_res[0].start;
+ gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1];
+ gpio_res[1].end = gpio_res[1].start;
+
+ platform_device_register_simple("clps711x-gpio", i,
+ gpio_res, ARRAY_SIZE(gpio_res));
+ }
+}
+
+void __init clps711x_devices_init(void)
+{
+ clps711x_add_gpio();
+}
diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h
new file mode 100644
index 0000000..a5efc17
--- /dev/null
+++ b/arch/arm/mach-clps711x/devices.h
@@ -0,0 +1,12 @@
+/*
+ * CLPS711X common devices definitions
+ *
+ * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+void clps711x_devices_init(void);
--
1.8.1.5
next prev parent reply other threads:[~2013-06-05 5:59 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 5:59 [PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency Alexander Shiyan
2013-06-05 5:59 ` Alexander Shiyan [this message]
2013-06-05 5:59 ` [PATCH RESEND 02/15] ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 03/15] ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 04/15] ARM: clps711x: autcpu12: Add support for NOR flash Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 05/15] ARM: clps711x: autcpu12: Special driver for handling memory is removed Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 06/15] ARM: clps711x: autcpu12: Move remaining specific definitions to board file Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 07/15] ARM: clps711x: p720t: Define PLD registers as GPIOs Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 08/15] ARM: clps711x: Move specific definitions from hardware.h to boards files Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 09/15] ARM: clps711x: Replace "arch_initcall" in common code with ".init_early" Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 10/15] ARM: clps711x: Add clocksource framework Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 11/15] ARM: clps711x: Optimize interrupt handling Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 12/15] ARM: clps711x: edb7211: Add support for I2C Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 13/15] ARM: clps711x: edb7211: Control LCD backlight via PWM Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 14/15] ARM: clps711x: Add support for SYSCON driver Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 15/15] ARM: clps711x: Update defconfig Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code Alexander Shiyan
2013-06-17 6:24 ` Linus Walleij
2013-06-17 6:29 ` Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND v2 2/3] ARM: clps711x: Re-add GPIO support Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND v2 3/3] GPIO: clps711x: Add DT support Alexander Shiyan
2013-06-05 5:59 ` [PATCH RESEND 07/15] ARM: clps711x: p720t: Define PLD registers as GPIOs Alexander Shiyan
2013-06-19 16:18 ` [PATCH RESEND 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency Arnd Bergmann
2013-06-19 16:25 ` Re[2]: " Alexander Shiyan
2013-06-19 17:59 ` Arnd Bergmann
-- strict thread matches above, loose matches on Subject: below --
2013-05-13 17:07 [PATCH " Alexander Shiyan
2013-05-13 17:07 ` [PATCH RESEND v2 2/3] ARM: clps711x: Re-add GPIO support Alexander Shiyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370411967-29451-2-git-send-email-shc_work@mail.ru \
--to=shc_work@mail.ru \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).