From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/15] Final Samsung PWM support cleanup
Date: Wed, 5 Jun 2013 23:18:05 +0200 [thread overview]
Message-ID: <1370467100-10820-1-git-send-email-tomasz.figa@gmail.com> (raw)
Since we now have a proper Samsung PWM clocksource driver in place,
we can proceed with further cleanup of PWM timers support on Samsung SoCs.
This series attempts to achieve this goal by:
1) moving remaining Samsung platforms to the new clocksource driver
2) removing old clocksource driver
3) adding new multiplatform- and DT-aware PWM driver
4) moving all Samsung platforms to use the new PWM driver
5) removing old PWM driver
6) removing all PWM-related code that is not used anymore
Cleaning up the PWM driver is a bit tricky, because the design of current
driver makes it completely unsuitable for DT and multiplatform and would
require a heavy rework to make it usable, breaking any existing Samsung PWM
users by the way. To avoid any breakage I decided to keep the old driver,
add new one, move all platforms to it and then remove the old one.
See particular patches for more detailed descriptions.
On S3C6410-based Tiny6410 (Mini6410-compatible), after enabling pwm-beeper:
Tested-by: Tomasz Figa <tomasz.figa@gmail.com>
Needs testing on other platforms as I could only compile test for them.
Tomasz Figa (15):
ARM: SAMSUNG: Unify base address definitions of timer block
ARM: SAMSUNG: Add new PWM platform device
ARM: SAMSUNG: Set PWM platform data
ARM: SAMSUNG: Move all platforms to new clocksource driver
ARM: SAMSUNG: Remove old samsung-time driver
ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
pwm: samsung: Rename to pwm-samsung-legacy
pwm: Add new pwm-samsung driver
ARM: SAMSUNG: Rework private data handling in dev-backlight
ARM: SAMSUNG: Modify board files to use new PWM platform device
pwm: Remove superseded pwm-samsung-legacy driver
ARM: SAMSUNG: Remove old PWM timer platform devices
ARM: SAMSUNG: Remove pwm-clock infrastructure
ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
ARM: SAMSUNG: Remove plat/regs-timer.h header
arch/arm/Kconfig | 1 -
arch/arm/mach-exynos/common.c | 3 +
arch/arm/mach-exynos/include/mach/irqs.h | 3 +-
arch/arm/mach-exynos/include/mach/map.h | 1 +
arch/arm/mach-exynos/mach-nuri.c | 4 +-
arch/arm/mach-exynos/mach-origen.c | 3 +-
arch/arm/mach-exynos/mach-smdk4x12.c | 3 +-
arch/arm/mach-exynos/mach-smdkv310.c | 3 +-
arch/arm/mach-s3c24xx/Kconfig | 12 +-
arch/arm/mach-s3c24xx/clock-s3c2410.c | 1 -
arch/arm/mach-s3c24xx/clock-s3c2412.c | 1 -
arch/arm/mach-s3c24xx/clock-s3c2416.c | 2 -
arch/arm/mach-s3c24xx/clock-s3c2443.c | 2 -
arch/arm/mach-s3c24xx/common.c | 27 +
arch/arm/mach-s3c24xx/include/mach/map.h | 2 +
arch/arm/mach-s3c24xx/mach-h1940.c | 4 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 5 +-
arch/arm/mach-s3c64xx/Kconfig | 4 +-
arch/arm/mach-s3c64xx/clock.c | 2 -
arch/arm/mach-s3c64xx/common.c | 32 +-
arch/arm/mach-s3c64xx/include/mach/irqs.h | 8 -
arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
arch/arm/mach-s3c64xx/irq-pm.c | 2 -
arch/arm/mach-s3c64xx/mach-crag6410.c | 4 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 4 +-
arch/arm/mach-s3c64xx/mach-smartq.c | 4 +-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 +
arch/arm/mach-s5p64x0/Kconfig | 4 +-
arch/arm/mach-s5p64x0/clock-s5p6440.c | 2 -
arch/arm/mach-s5p64x0/clock-s5p6450.c | 2 -
arch/arm/mach-s5p64x0/common.c | 27 +
arch/arm/mach-s5p64x0/include/mach/irqs.h | 2 -
arch/arm/mach-s5p64x0/include/mach/map.h | 1 +
arch/arm/mach-s5p64x0/mach-smdk6440.c | 1 +
arch/arm/mach-s5p64x0/mach-smdk6450.c | 1 +
arch/arm/mach-s5p64x0/pm.c | 3 -
arch/arm/mach-s5pc100/Kconfig | 2 +-
arch/arm/mach-s5pc100/clock.c | 2 -
arch/arm/mach-s5pc100/common.c | 28 +
arch/arm/mach-s5pc100/include/mach/irqs.h | 2 -
arch/arm/mach-s5pc100/include/mach/map.h | 1 +
arch/arm/mach-s5pc100/mach-smdkc100.c | 1 +
arch/arm/mach-s5pv210/Kconfig | 2 +-
arch/arm/mach-s5pv210/clock.c | 1 -
arch/arm/mach-s5pv210/common.c | 28 +
arch/arm/mach-s5pv210/include/mach/irqs.h | 2 -
arch/arm/mach-s5pv210/include/mach/map.h | 1 +
arch/arm/mach-s5pv210/mach-smdkv210.c | 1 +
arch/arm/mach-s5pv210/pm.c | 10 -
arch/arm/plat-samsung/Kconfig | 14 -
arch/arm/plat-samsung/Makefile | 3 -
arch/arm/plat-samsung/dev-backlight.c | 61 ++-
arch/arm/plat-samsung/devs.c | 42 +-
arch/arm/plat-samsung/include/plat/clock.h | 4 -
arch/arm/plat-samsung/include/plat/devs.h | 1 +
arch/arm/plat-samsung/include/plat/irq-vic-timer.h | 13 -
arch/arm/plat-samsung/include/plat/irqs.h | 9 -
arch/arm/plat-samsung/include/plat/pwm-clock.h | 81 ---
arch/arm/plat-samsung/include/plat/pwm-core.h | 24 +
arch/arm/plat-samsung/include/plat/regs-timer.h | 124 -----
arch/arm/plat-samsung/include/plat/samsung-time.h | 23 -
arch/arm/plat-samsung/irq-vic-timer.c | 98 ----
arch/arm/plat-samsung/pwm-clock.c | 474 -----------------
arch/arm/plat-samsung/s5p-irq.c | 4 -
arch/arm/plat-samsung/samsung-time.c | 394 --------------
drivers/pwm/pwm-samsung.c | 575 ++++++++++++++-------
66 files changed, 627 insertions(+), 1580 deletions(-)
delete mode 100644 arch/arm/plat-samsung/include/plat/irq-vic-timer.h
delete mode 100644 arch/arm/plat-samsung/include/plat/pwm-clock.h
create mode 100644 arch/arm/plat-samsung/include/plat/pwm-core.h
delete mode 100644 arch/arm/plat-samsung/include/plat/regs-timer.h
delete mode 100644 arch/arm/plat-samsung/irq-vic-timer.c
delete mode 100644 arch/arm/plat-samsung/pwm-clock.c
delete mode 100644 arch/arm/plat-samsung/samsung-time.c
--
1.8.2.1
next reply other threads:[~2013-06-05 21:18 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 21:18 Tomasz Figa [this message]
2013-06-05 21:18 ` [PATCH 01/15] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-06-05 21:18 ` [PATCH 02/15] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-06-05 21:18 ` [PATCH 03/15] ARM: SAMSUNG: Set PWM platform data Tomasz Figa
2013-06-05 21:18 ` [PATCH 04/15] ARM: SAMSUNG: Move all platforms to new clocksource driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 05/15] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 06/15] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-06-05 21:18 ` [PATCH 07/15] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-06-05 21:18 ` [PATCH 08/15] pwm: Add new pwm-samsung driver Tomasz Figa
2013-06-13 20:14 ` Heiko Stübner
2013-06-13 20:18 ` Tomasz Figa
2013-06-16 17:19 ` Tomasz Figa
2013-06-16 20:45 ` Kukjin Kim
2013-06-17 20:29 ` Thierry Reding
2013-06-17 20:50 ` Tomasz Figa
2013-06-18 22:17 ` Thierry Reding
2013-06-18 22:45 ` Tomasz Figa
2013-06-19 9:43 ` Thierry Reding
2013-06-19 10:23 ` Tomasz Figa
2013-06-24 17:52 ` Tomasz Figa
2013-06-24 19:50 ` Thierry Reding
2013-06-24 20:03 ` Tomasz Figa
2013-06-24 20:28 ` Thierry Reding
2013-06-24 20:55 ` Arnd Bergmann
2013-06-18 17:59 ` Tomasz Figa
2013-06-18 18:06 ` Kukjin Kim
2013-06-18 18:13 ` Tomasz Figa
2013-06-18 21:33 ` Thierry Reding
2013-06-18 21:35 ` Tomasz Figa
2013-06-18 19:41 ` Tomasz Figa
2013-06-18 21:40 ` Thierry Reding
2013-06-18 21:42 ` Tomasz Figa
2013-06-18 22:20 ` Thierry Reding
2013-06-05 21:18 ` [PATCH 09/15] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-06-05 21:18 ` [PATCH 10/15] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-06-05 21:18 ` [PATCH 11/15] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 12/15] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-06-05 21:18 ` [PATCH 13/15] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-06-05 21:18 ` [PATCH 14/15] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Tomasz Figa
2013-06-13 20:24 ` Heiko Stübner
2013-06-13 20:38 ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 15/15] ARM: SAMSUNG: Remove " Tomasz Figa
2013-06-12 21:48 ` [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-12 23:00 ` Olof Johansson
2013-06-12 23:13 ` Tomasz Figa
2013-06-12 23:38 ` Heiko Stübner
2013-06-12 23:52 ` Sylwester Nawrocki
2013-06-13 9:07 ` Tomasz Figa
2013-06-13 20:17 ` Heiko Stübner
2013-06-13 22:27 ` Heiko Stübner
2013-06-13 0:25 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370467100-10820-1-git-send-email-tomasz.figa@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).