From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 14/15] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
Date: Wed, 5 Jun 2013 23:18:19 +0200 [thread overview]
Message-ID: <1370467100-10820-15-git-send-email-tomasz.figa@gmail.com> (raw)
In-Reply-To: <1370467100-10820-1-git-send-email-tomasz.figa@gmail.com>
This patch removes remaining inclusions of plat/regs-timer.h as a
preparation to remove the header.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
arch/arm/mach-s3c64xx/irq-pm.c | 2 --
arch/arm/mach-s5p64x0/pm.c | 3 ---
arch/arm/mach-s5pv210/pm.c | 10 ----------
arch/arm/plat-samsung/s5p-irq.c | 1 -
4 files changed, 16 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 0c7e1d9..c3da1b6 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -22,7 +22,6 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
@@ -43,7 +42,6 @@ static struct sleep_save irq_save[] = {
SAVE_ITEM(S3C64XX_EINT0FLTCON2),
SAVE_ITEM(S3C64XX_EINT0FLTCON3),
SAVE_ITEM(S3C64XX_EINT0MASK),
- SAVE_ITEM(S3C64XX_TINT_CSTAT),
};
static struct irq_grp_save {
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 97c2a08a..861e15c 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -18,7 +18,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-timer.h>
#include <plat/wakeup-mask.h>
#include <mach/regs-clock.h>
@@ -48,8 +47,6 @@ static struct sleep_save s5p64x0_misc_save[] = {
SAVE_ITEM(S5P64X0_MEM0CONSLP1),
SAVE_ITEM(S5P64X0_MEM0DRVCON),
SAVE_ITEM(S5P64X0_MEM1DRVCON),
-
- SAVE_ITEM(S3C64XX_TINT_CSTAT),
};
/* DPLL is present only in S5P6450 */
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 2b68a67..3cf3f9c 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -21,7 +21,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-timer.h>
#include <mach/regs-irq.h>
#include <mach/regs-clock.h>
@@ -77,15 +76,6 @@ static struct sleep_save s5pv210_core_save[] = {
/* Clock ETC */
SAVE_ITEM(S5P_CLK_OUT),
SAVE_ITEM(S5P_MDNIE_SEL),
-
- /* PWM Register */
- SAVE_ITEM(S3C2410_TCFG0),
- SAVE_ITEM(S3C2410_TCFG1),
- SAVE_ITEM(S3C64XX_TINT_CSTAT),
- SAVE_ITEM(S3C2410_TCON),
- SAVE_ITEM(S3C2410_TCNTB(0)),
- SAVE_ITEM(S3C2410_TCMPB(0)),
- SAVE_ITEM(S3C2410_TCNTO(0)),
};
static int s5pv210_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index 6729cb2..ddfaca9 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -17,7 +17,6 @@
#include <mach/irqs.h>
#include <mach/map.h>
-#include <plat/regs-timer.h>
#include <plat/cpu.h>
void __init s5p_init_irq(u32 *vic, u32 num_vic)
--
1.8.2.1
next prev parent reply other threads:[~2013-06-05 21:18 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 21:18 [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-05 21:18 ` [PATCH 01/15] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-06-05 21:18 ` [PATCH 02/15] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-06-05 21:18 ` [PATCH 03/15] ARM: SAMSUNG: Set PWM platform data Tomasz Figa
2013-06-05 21:18 ` [PATCH 04/15] ARM: SAMSUNG: Move all platforms to new clocksource driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 05/15] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 06/15] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-06-05 21:18 ` [PATCH 07/15] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-06-05 21:18 ` [PATCH 08/15] pwm: Add new pwm-samsung driver Tomasz Figa
2013-06-13 20:14 ` Heiko Stübner
2013-06-13 20:18 ` Tomasz Figa
2013-06-16 17:19 ` Tomasz Figa
2013-06-16 20:45 ` Kukjin Kim
2013-06-17 20:29 ` Thierry Reding
2013-06-17 20:50 ` Tomasz Figa
2013-06-18 22:17 ` Thierry Reding
2013-06-18 22:45 ` Tomasz Figa
2013-06-19 9:43 ` Thierry Reding
2013-06-19 10:23 ` Tomasz Figa
2013-06-24 17:52 ` Tomasz Figa
2013-06-24 19:50 ` Thierry Reding
2013-06-24 20:03 ` Tomasz Figa
2013-06-24 20:28 ` Thierry Reding
2013-06-24 20:55 ` Arnd Bergmann
2013-06-18 17:59 ` Tomasz Figa
2013-06-18 18:06 ` Kukjin Kim
2013-06-18 18:13 ` Tomasz Figa
2013-06-18 21:33 ` Thierry Reding
2013-06-18 21:35 ` Tomasz Figa
2013-06-18 19:41 ` Tomasz Figa
2013-06-18 21:40 ` Thierry Reding
2013-06-18 21:42 ` Tomasz Figa
2013-06-18 22:20 ` Thierry Reding
2013-06-05 21:18 ` [PATCH 09/15] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-06-05 21:18 ` [PATCH 10/15] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-06-05 21:18 ` [PATCH 11/15] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 12/15] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-06-05 21:18 ` [PATCH 13/15] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-06-05 21:18 ` Tomasz Figa [this message]
2013-06-13 20:24 ` [PATCH 14/15] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Heiko Stübner
2013-06-13 20:38 ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 15/15] ARM: SAMSUNG: Remove " Tomasz Figa
2013-06-12 21:48 ` [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-12 23:00 ` Olof Johansson
2013-06-12 23:13 ` Tomasz Figa
2013-06-12 23:38 ` Heiko Stübner
2013-06-12 23:52 ` Sylwester Nawrocki
2013-06-13 9:07 ` Tomasz Figa
2013-06-13 20:17 ` Heiko Stübner
2013-06-13 22:27 ` Heiko Stübner
2013-06-13 0:25 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370467100-10820-15-git-send-email-tomasz.figa@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).