From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/15] ARM: SAMSUNG: Set PWM platform data
Date: Wed, 5 Jun 2013 23:18:08 +0200 [thread overview]
Message-ID: <1370467100-10820-4-git-send-email-tomasz.figa@gmail.com> (raw)
In-Reply-To: <1370467100-10820-1-git-send-email-tomasz.figa@gmail.com>
From: Tomasz Figa <t.figa@samsung.com>
This patch adds PWM platform data needed for legacy (non-DT) platforms
to handle SoC-specific bits of the PWM/timer block.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-exynos/common.c | 3 +++
arch/arm/mach-s3c24xx/common.c | 11 +++++++++++
arch/arm/mach-s3c64xx/common.c | 11 +++++++++++
arch/arm/mach-s5p64x0/common.c | 10 ++++++++++
arch/arm/mach-s5pc100/common.c | 11 +++++++++++
arch/arm/mach-s5pv210/common.c | 11 +++++++++++
6 files changed, 57 insertions(+)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 027c9e7..6b368a8 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -52,6 +52,7 @@
#include <plat/fb-core.h>
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
+#include <plat/pwm-core.h>
#include <plat/tv-core.h>
#include <plat/spi-core.h>
#include <plat/regs-serial.h>
@@ -443,6 +444,8 @@ static void __init exynos4_map_io(void)
s5p_hdmi_setname("exynos4-hdmi");
s3c64xx_spi_setname("exynos4210-spi");
+
+ samsung_pwm_set_platdata(&exynos4_pwm_variant);
}
static void __init exynos5_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index c157103..e5e7d7d 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
@@ -49,6 +50,7 @@
#include <plat/clock.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
+#include <plat/pwm-core.h>
#include "common.h"
@@ -216,6 +218,13 @@ static void s3c24xx_default_idle(void)
S3C2410_CLKCON);
}
+static struct samsung_pwm_variant s3c24xx_pwm_variant = {
+ .bits = 16,
+ .div_base = 1,
+ .has_tint_cstat = false,
+ .tclk_mask = (1 << 4),
+};
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
arm_pm_idle = s3c24xx_default_idle;
@@ -232,6 +241,8 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
s3c24xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
}
/* Serial port registrations */
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 0b9c0ba..5f3530e 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -26,6 +26,7 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/irqchip/arm-vic.h>
+#include <clocksource/samsung_pwm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -42,6 +43,7 @@
#include <plat/gpio-cfg.h>
#include <plat/irq-uart.h>
#include <plat/irq-vic-timer.h>
+#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
@@ -148,6 +150,13 @@ static struct device s3c64xx_dev = {
.bus = &s3c64xx_subsys,
};
+static struct samsung_pwm_variant s3c64xx_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
+};
+
/* read cpu identification code */
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -160,6 +169,8 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
s3c64xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
}
static __init int s3c64xx_dev_init(void)
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 8ae5800..50edd3c 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
@@ -46,6 +47,7 @@
#include <plat/fb-core.h>
#include <plat/spi-core.h>
#include <plat/gpio-cfg.h>
+#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
@@ -156,6 +158,13 @@ static void s5p64x0_idle(void)
cpu_do_idle();
}
+static struct samsung_pwm_variant s5p64x0_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = 0,
+};
+
/*
* s5p64x0_map_io
*
@@ -173,6 +182,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
s5p_init_cpu(S5P64X0_SYS_ID);
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+ samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
}
void __init s5p6440_map_io(void)
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index cc6e561..e56a4d8 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
@@ -45,6 +46,7 @@
#include <plat/fb-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
+#include <plat/pwm-core.h>
#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
@@ -131,6 +133,13 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
}
};
+static struct samsung_pwm_variant s5pc100_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 5),
+};
+
/*
* s5pc100_map_io
*
@@ -148,6 +157,8 @@ void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
s5p_init_cpu(S5P_VA_CHIPID);
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s5pc100_pwm_variant);
}
void __init s5pc100_map_io(void)
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 9dfe93e..4eba33d 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/device.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
@@ -42,6 +43,7 @@
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
+#include <plat/pwm-core.h>
#include <plat/tv-core.h>
#include <plat/spi-core.h>
#include <plat/regs-serial.h>
@@ -148,6 +150,13 @@ void s5pv210_restart(char mode, const char *cmd)
__raw_writel(0x1, S5P_SWRESET);
}
+static struct samsung_pwm_variant s5pv210_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = (1 << 5),
+};
+
/*
* s5pv210_map_io
*
@@ -165,6 +174,8 @@ void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
s5p_init_cpu(S5P_VA_CHIPID);
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+ samsung_pwm_set_platdata(&s5pv210_pwm_variant);
}
void __init s5pv210_map_io(void)
--
1.8.2.1
next prev parent reply other threads:[~2013-06-05 21:18 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 21:18 [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-05 21:18 ` [PATCH 01/15] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-06-05 21:18 ` [PATCH 02/15] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-06-05 21:18 ` Tomasz Figa [this message]
2013-06-05 21:18 ` [PATCH 04/15] ARM: SAMSUNG: Move all platforms to new clocksource driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 05/15] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 06/15] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-06-05 21:18 ` [PATCH 07/15] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-06-05 21:18 ` [PATCH 08/15] pwm: Add new pwm-samsung driver Tomasz Figa
2013-06-13 20:14 ` Heiko Stübner
2013-06-13 20:18 ` Tomasz Figa
2013-06-16 17:19 ` Tomasz Figa
2013-06-16 20:45 ` Kukjin Kim
2013-06-17 20:29 ` Thierry Reding
2013-06-17 20:50 ` Tomasz Figa
2013-06-18 22:17 ` Thierry Reding
2013-06-18 22:45 ` Tomasz Figa
2013-06-19 9:43 ` Thierry Reding
2013-06-19 10:23 ` Tomasz Figa
2013-06-24 17:52 ` Tomasz Figa
2013-06-24 19:50 ` Thierry Reding
2013-06-24 20:03 ` Tomasz Figa
2013-06-24 20:28 ` Thierry Reding
2013-06-24 20:55 ` Arnd Bergmann
2013-06-18 17:59 ` Tomasz Figa
2013-06-18 18:06 ` Kukjin Kim
2013-06-18 18:13 ` Tomasz Figa
2013-06-18 21:33 ` Thierry Reding
2013-06-18 21:35 ` Tomasz Figa
2013-06-18 19:41 ` Tomasz Figa
2013-06-18 21:40 ` Thierry Reding
2013-06-18 21:42 ` Tomasz Figa
2013-06-18 22:20 ` Thierry Reding
2013-06-05 21:18 ` [PATCH 09/15] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-06-05 21:18 ` [PATCH 10/15] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-06-05 21:18 ` [PATCH 11/15] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 12/15] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-06-05 21:18 ` [PATCH 13/15] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-06-05 21:18 ` [PATCH 14/15] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Tomasz Figa
2013-06-13 20:24 ` Heiko Stübner
2013-06-13 20:38 ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 15/15] ARM: SAMSUNG: Remove " Tomasz Figa
2013-06-12 21:48 ` [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-12 23:00 ` Olof Johansson
2013-06-12 23:13 ` Tomasz Figa
2013-06-12 23:38 ` Heiko Stübner
2013-06-12 23:52 ` Sylwester Nawrocki
2013-06-13 9:07 ` Tomasz Figa
2013-06-13 20:17 ` Heiko Stübner
2013-06-13 22:27 ` Heiko Stübner
2013-06-13 0:25 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370467100-10820-4-git-send-email-tomasz.figa@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).