From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/15] ARM: SAMSUNG: Move all platforms to new clocksource driver
Date: Wed, 5 Jun 2013 23:18:09 +0200 [thread overview]
Message-ID: <1370467100-10820-5-git-send-email-tomasz.figa@gmail.com> (raw)
In-Reply-To: <1370467100-10820-1-git-send-email-tomasz.figa@gmail.com>
This patch moves all Samsung platforms using PWM clocksource from legacy
samsung-time to new samsung-pwm-timer driver.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
arch/arm/mach-s3c24xx/Kconfig | 12 ++++++------
arch/arm/mach-s3c24xx/common.c | 16 ++++++++++++++++
arch/arm/mach-s3c64xx/Kconfig | 4 ++--
arch/arm/mach-s3c64xx/common.c | 17 +++++++++++++++++
arch/arm/mach-s5p64x0/Kconfig | 4 ++--
arch/arm/mach-s5p64x0/common.c | 17 +++++++++++++++++
arch/arm/mach-s5pc100/Kconfig | 2 +-
arch/arm/mach-s5pc100/common.c | 17 +++++++++++++++++
arch/arm/mach-s5pv210/Kconfig | 2 +-
arch/arm/mach-s5pv210/common.c | 17 +++++++++++++++++
10 files changed, 96 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7ef7119..97a9b90 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -30,7 +30,7 @@ config CPU_S3C2410
select S3C2410_CLOCK
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -41,7 +41,7 @@ config CPU_S3C2412
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -53,7 +53,7 @@ config CPU_S3C2416
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
help
Support for the S3C2416 SoC from the S3C24XX line
@@ -64,7 +64,7 @@ config CPU_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
help
Support for S3C2440 Samsung Mobile CPU based systems.
@@ -74,7 +74,7 @@ config CPU_S3C2442
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
help
Support for S3C2442 Samsung Mobile CPU based systems.
@@ -89,7 +89,7 @@ config CPU_S3C2443
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
help
Support for the S3C2443 SoC from the S3C24XX line
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index e5e7d7d..457261c 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -245,6 +245,22 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
}
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s3c24xx_pwm_variant);
+}
+
/* Serial port registrations */
#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 2057853..f78a6a0 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -17,13 +17,13 @@ config PLAT_S3C64XX
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
bool
help
Enable S3C6400 CPU support
config CPU_S3C6410
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
bool
help
Enable S3C6410 CPU support
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 5f3530e..add8451 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -157,6 +157,23 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
.tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
};
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s3c64xx_pwm_variant);
+}
+
/* read cpu identification code */
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 5a707bd..a39cd9e 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -11,14 +11,14 @@ config CPU_S5P6440
bool
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 50edd3c..5b1ce58 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -165,6 +165,23 @@ static struct samsung_pwm_variant s5p64x0_pwm_variant = {
.tclk_mask = 0,
};
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s5p64x0_pwm_variant);
+}
+
/*
* s5p64x0_map_io
*
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 2f456a4..2094a9b 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -11,7 +11,7 @@ config CPU_S5PC100
bool
select S5P_EXT_INT
select SAMSUNG_DMADEV
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
help
Enable S5PC100 CPU support
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index e56a4d8..1db8356 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -140,6 +140,23 @@ static struct samsung_pwm_variant s5pc100_pwm_variant = {
.tclk_mask = (1 << 5),
};
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s5pc100_pwm_variant);
+}
+
/*
* s5pc100_map_io
*
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 0963283..07cdff7 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -15,7 +15,7 @@ config CPU_S5PV210
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
- select SAMSUNG_HRT
+ select CLKSRC_SAMSUNG_PWM
help
Enable S5PV210 CPU support
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 4eba33d..d28affb 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -157,6 +157,23 @@ static struct samsung_pwm_variant s5pv210_pwm_variant = {
.tclk_mask = (1 << 5),
};
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+ s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+ IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+ };
+
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &s5pv210_pwm_variant);
+}
+
/*
* s5pv210_map_io
*
--
1.8.2.1
next prev parent reply other threads:[~2013-06-05 21:18 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 21:18 [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-05 21:18 ` [PATCH 01/15] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-06-05 21:18 ` [PATCH 02/15] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-06-05 21:18 ` [PATCH 03/15] ARM: SAMSUNG: Set PWM platform data Tomasz Figa
2013-06-05 21:18 ` Tomasz Figa [this message]
2013-06-05 21:18 ` [PATCH 05/15] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 06/15] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-06-05 21:18 ` [PATCH 07/15] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-06-05 21:18 ` [PATCH 08/15] pwm: Add new pwm-samsung driver Tomasz Figa
2013-06-13 20:14 ` Heiko Stübner
2013-06-13 20:18 ` Tomasz Figa
2013-06-16 17:19 ` Tomasz Figa
2013-06-16 20:45 ` Kukjin Kim
2013-06-17 20:29 ` Thierry Reding
2013-06-17 20:50 ` Tomasz Figa
2013-06-18 22:17 ` Thierry Reding
2013-06-18 22:45 ` Tomasz Figa
2013-06-19 9:43 ` Thierry Reding
2013-06-19 10:23 ` Tomasz Figa
2013-06-24 17:52 ` Tomasz Figa
2013-06-24 19:50 ` Thierry Reding
2013-06-24 20:03 ` Tomasz Figa
2013-06-24 20:28 ` Thierry Reding
2013-06-24 20:55 ` Arnd Bergmann
2013-06-18 17:59 ` Tomasz Figa
2013-06-18 18:06 ` Kukjin Kim
2013-06-18 18:13 ` Tomasz Figa
2013-06-18 21:33 ` Thierry Reding
2013-06-18 21:35 ` Tomasz Figa
2013-06-18 19:41 ` Tomasz Figa
2013-06-18 21:40 ` Thierry Reding
2013-06-18 21:42 ` Tomasz Figa
2013-06-18 22:20 ` Thierry Reding
2013-06-05 21:18 ` [PATCH 09/15] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-06-05 21:18 ` [PATCH 10/15] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-06-05 21:18 ` [PATCH 11/15] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-06-05 21:18 ` [PATCH 12/15] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-06-05 21:18 ` [PATCH 13/15] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-06-05 21:18 ` [PATCH 14/15] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Tomasz Figa
2013-06-13 20:24 ` Heiko Stübner
2013-06-13 20:38 ` Tomasz Figa
2013-06-05 21:18 ` [PATCH 15/15] ARM: SAMSUNG: Remove " Tomasz Figa
2013-06-12 21:48 ` [PATCH 00/15] Final Samsung PWM support cleanup Tomasz Figa
2013-06-12 23:00 ` Olof Johansson
2013-06-12 23:13 ` Tomasz Figa
2013-06-12 23:38 ` Heiko Stübner
2013-06-12 23:52 ` Sylwester Nawrocki
2013-06-13 9:07 ` Tomasz Figa
2013-06-13 20:17 ` Heiko Stübner
2013-06-13 22:27 ` Heiko Stübner
2013-06-13 0:25 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370467100-10820-5-git-send-email-tomasz.figa@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).