[PATCH v4 1/3] leds: leds-mc13783: Prepare driver to support MC13892 LEDs

[PATCH v4 1/3] leds: leds-mc13783: Prepare driver to support MC13892 LEDs

[Alexander Shiyan]

This patch rewrite driver code to be ready to add support for
MC13892 LEDs and probe from devicetree.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-imx/mach-mx31moboard.c |   9 +-
 drivers/leds/leds-mc13783.c          | 406 ++++++++++++++---------------------
 include/linux/mfd/mc13xxx.h          |  93 ++++----
 3 files changed, 204 insertions(+), 304 deletions(-)

diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index dae4cd7..6f424ec 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -268,10 +268,11 @@ static struct mc13xxx_led_platform_data moboard_led[] = {
 static struct mc13xxx_leds_platform_data moboard_leds = {
 	.num_leds = ARRAY_SIZE(moboard_led),
 	.led = moboard_led,
-	.flags = MC13783_LED_SLEWLIMTC,
-	.abmode = MC13783_LED_AB_DISABLED,
-	.tc1_period = MC13783_LED_PERIOD_10MS,
-	.tc2_period = MC13783_LED_PERIOD_10MS,
+	.led_control[0]	= MC13783_LED_C0_ENABLE | MC13783_LED_C0_ABMODE(0),
+	.led_control[1]	= MC13783_LED_C1_SLEWLIM,
+	.led_control[2]	= MC13783_LED_C2_SLEWLIM,
+	.led_control[3]	= MC13783_LED_C3_PERIOD(0),
+	.led_control[4]	= MC13783_LED_C3_PERIOD(0),
 };
 
 static struct mc13xxx_buttons_platform_data moboard_buttons = {
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index ea8fc5d..5ba954a 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -22,9 +22,16 @@
 #include <linux/leds.h>
 #include <linux/workqueue.h>
 #include <linux/mfd/mc13xxx.h>
-#include <linux/slab.h>
 
-struct mc13783_led {
+#define MC13XXX_REG_LED_CONTROL(x)	(51 + (x))
+
+struct mc13xxx_led_devtype {
+	int	led_min;
+	int	led_max;
+	int	num_regs;
+};
+
+struct mc13xxx_led {
 	struct led_classdev	cdev;
 	struct work_struct	work;
 	struct mc13xxx		*master;
@@ -32,66 +39,35 @@ struct mc13783_led {
 	int			id;
 };
 
-#define MC13783_REG_LED_CONTROL_0	51
-#define MC13783_LED_C0_ENABLE_BIT	(1 << 0)
-#define MC13783_LED_C0_TRIODE_MD_BIT	(1 << 7)
-#define MC13783_LED_C0_TRIODE_AD_BIT	(1 << 8)
-#define MC13783_LED_C0_TRIODE_KP_BIT	(1 << 9)
-#define MC13783_LED_C0_BOOST_BIT	(1 << 10)
-#define MC13783_LED_C0_ABMODE_MASK	0x7
-#define MC13783_LED_C0_ABMODE		11
-#define MC13783_LED_C0_ABREF_MASK	0x3
-#define MC13783_LED_C0_ABREF		14
-
-#define MC13783_REG_LED_CONTROL_1	52
-#define MC13783_LED_C1_TC1HALF_BIT	(1 << 18)
-
-#define MC13783_REG_LED_CONTROL_2	53
-#define MC13783_LED_C2_BL_P_MASK	0xf
-#define MC13783_LED_C2_MD_P		9
-#define MC13783_LED_C2_AD_P		13
-#define MC13783_LED_C2_KP_P		17
-#define MC13783_LED_C2_BL_C_MASK	0x7
-#define MC13783_LED_C2_MD_C		0
-#define MC13783_LED_C2_AD_C		3
-#define MC13783_LED_C2_KP_C		6
-
-#define MC13783_REG_LED_CONTROL_3	54
-#define MC13783_LED_C3_TC_P		6
-#define MC13783_LED_C3_TC_P_MASK	0x1f
-
-#define MC13783_REG_LED_CONTROL_4	55
-#define MC13783_REG_LED_CONTROL_5	56
-
-#define MC13783_LED_Cx_PERIOD		21
-#define MC13783_LED_Cx_PERIOD_MASK	0x3
-#define MC13783_LED_Cx_SLEWLIM_BIT      (1 << 23)
-#define MC13783_LED_Cx_TRIODE_TC_BIT	(1 << 23)
-#define MC13783_LED_Cx_TC_C_MASK	0x3
-
-static void mc13783_led_work(struct work_struct *work)
+struct mc13xxx_leds {
+	struct mc13xxx_led_devtype	*devtype;
+	int				num_leds;
+	struct mc13xxx_led		led[0];
+};
+
+static void mc13xxx_led_work(struct work_struct *work)
 {
-	struct mc13783_led *led = container_of(work, struct mc13783_led, work);
-	int reg = 0;
-	int mask = 0;
-	int value = 0;
-	int bank, off, shift;
+	struct mc13xxx_led *led = container_of(work, struct mc13xxx_led, work);
+	int reg, mask, value, bank, off, shift;
 
 	switch (led->id) {
 	case MC13783_LED_MD:
-		reg = MC13783_REG_LED_CONTROL_2;
-		mask = MC13783_LED_C2_BL_P_MASK << MC13783_LED_C2_MD_P;
-		value = (led->new_brightness >> 4) << MC13783_LED_C2_MD_P;
+		reg = MC13XXX_REG_LED_CONTROL(2);
+		shift = 9;
+		mask = 0x0f;
+		value = led->new_brightness >> 4;
 		break;
 	case MC13783_LED_AD:
-		reg = MC13783_REG_LED_CONTROL_2;
-		mask = MC13783_LED_C2_BL_P_MASK << MC13783_LED_C2_AD_P;
-		value = (led->new_brightness >> 4) << MC13783_LED_C2_AD_P;
+		reg = MC13XXX_REG_LED_CONTROL(2);
+		shift = 13;
+		mask = 0x0f;
+		value = led->new_brightness >> 4;
 		break;
 	case MC13783_LED_KP:
-		reg = MC13783_REG_LED_CONTROL_2;
-		mask = MC13783_LED_C2_BL_P_MASK << MC13783_LED_C2_KP_P;
-		value = (led->new_brightness >> 4) << MC13783_LED_C2_KP_P;
+		reg = MC13XXX_REG_LED_CONTROL(2);
+		shift = 17;
+		mask = 0x0f;
+		value = led->new_brightness >> 4;
 		break;
 	case MC13783_LED_R1:
 	case MC13783_LED_G1:
@@ -103,57 +79,50 @@ static void mc13783_led_work(struct work_struct *work)
 	case MC13783_LED_G3:
 	case MC13783_LED_B3:
 		off = led->id - MC13783_LED_R1;
-		bank = off/3;
-		reg = MC13783_REG_LED_CONTROL_3 + off/3;
-		shift = (off - bank * 3) * 5 + MC13783_LED_C3_TC_P;
-		value = (led->new_brightness >> 3) << shift;
-		mask = MC13783_LED_C3_TC_P_MASK << shift;
+		bank = off / 3;
+		reg = MC13XXX_REG_LED_CONTROL(3) + bank;
+ 		shift = (off - bank * 3) * 5 + 6;
+		value = led->new_brightness >> 3;
+		mask = 0x1f;
 		break;
+	default:
+		BUG();
 	}
 
 	mc13xxx_lock(led->master);
-
-	mc13xxx_reg_rmw(led->master, reg, mask, value);
-
+	mc13xxx_reg_rmw(led->master, reg, mask << shift, value << shift);
 	mc13xxx_unlock(led->master);
 }
 
-static void mc13783_led_set(struct led_classdev *led_cdev,
-			   enum led_brightness value)
+static void mc13xxx_led_set(struct led_classdev *led_cdev,
+			    enum led_brightness value)
 {
-	struct mc13783_led *led;
+	struct mc13xxx_led *led =
+		container_of(led_cdev, struct mc13xxx_led, cdev);
 
-	led = container_of(led_cdev, struct mc13783_led, cdev);
 	led->new_brightness = value;
 	schedule_work(&led->work);
 }
 
-static int mc13783_led_setup(struct mc13783_led *led, int max_current)
+static int __init mc13xxx_led_setup(struct mc13xxx_led *led, int max_current)
 {
-	int shift = 0;
-	int mask = 0;
-	int value = 0;
-	int reg = 0;
-	int ret, bank;
+	int shift, mask, reg, ret, bank;
 
 	switch (led->id) {
 	case MC13783_LED_MD:
-		shift = MC13783_LED_C2_MD_C;
-		mask = MC13783_LED_C2_BL_C_MASK;
-		value = max_current & MC13783_LED_C2_BL_C_MASK;
-		reg = MC13783_REG_LED_CONTROL_2;
+		reg = MC13XXX_REG_LED_CONTROL(2);
+		shift = 0;
+		mask = 0x07;
 		break;
 	case MC13783_LED_AD:
-		shift = MC13783_LED_C2_AD_C;
-		mask = MC13783_LED_C2_BL_C_MASK;
-		value = max_current & MC13783_LED_C2_BL_C_MASK;
-		reg = MC13783_REG_LED_CONTROL_2;
+		reg = MC13XXX_REG_LED_CONTROL(2);
+		shift = 3;
+		mask = 0x07;
 		break;
 	case MC13783_LED_KP:
-		shift = MC13783_LED_C2_KP_C;
-		mask = MC13783_LED_C2_BL_C_MASK;
-		value = max_current & MC13783_LED_C2_BL_C_MASK;
-		reg = MC13783_REG_LED_CONTROL_2;
+		reg = MC13XXX_REG_LED_CONTROL(2);
+		shift = 6;
+		mask = 0x07;
 		break;
 	case MC13783_LED_R1:
 	case MC13783_LED_G1:
@@ -164,228 +133,165 @@ static int mc13783_led_setup(struct mc13783_led *led, int max_current)
 	case MC13783_LED_R3:
 	case MC13783_LED_G3:
 	case MC13783_LED_B3:
-		bank = (led->id - MC13783_LED_R1)/3;
-		reg = MC13783_REG_LED_CONTROL_3 + bank;
+		bank = (led->id - MC13783_LED_R1) / 3;
+		reg = MC13XXX_REG_LED_CONTROL(3) + bank;
 		shift = ((led->id - MC13783_LED_R1) - bank * 3) * 2;
-		mask = MC13783_LED_Cx_TC_C_MASK;
-		value = max_current & MC13783_LED_Cx_TC_C_MASK;
+		mask = 0x03;
 		break;
+	default:
+		BUG();
 	}
 
 	mc13xxx_lock(led->master);
-
 	ret = mc13xxx_reg_rmw(led->master, reg, mask << shift,
-						value << shift);
-
+			      max_current << shift);
 	mc13xxx_unlock(led->master);
-	return ret;
-}
-
-static int mc13783_leds_prepare(struct platform_device *pdev)
-{
-	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
-	int ret = 0;
-	int reg = 0;
-
-	mc13xxx_lock(dev);
-
-	if (pdata->flags & MC13783_LED_TC1HALF)
-		reg |= MC13783_LED_C1_TC1HALF_BIT;
-
-	if (pdata->flags & MC13783_LED_SLEWLIMTC)
-		reg |= MC13783_LED_Cx_SLEWLIM_BIT;
-
-	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
-	if (ret)
-		goto out;
-
-	reg = (pdata->bl_period & MC13783_LED_Cx_PERIOD_MASK) <<
-							MC13783_LED_Cx_PERIOD;
-
-	if (pdata->flags & MC13783_LED_SLEWLIMBL)
-		reg |= MC13783_LED_Cx_SLEWLIM_BIT;
-
-	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
-	if (ret)
-		goto out;
-
-	reg = (pdata->tc1_period & MC13783_LED_Cx_PERIOD_MASK) <<
-							MC13783_LED_Cx_PERIOD;
-
-	if (pdata->flags & MC13783_LED_TRIODE_TC1)
-		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
-
-	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
-	if (ret)
-		goto out;
 
-	reg = (pdata->tc2_period & MC13783_LED_Cx_PERIOD_MASK) <<
-							MC13783_LED_Cx_PERIOD;
-
-	if (pdata->flags & MC13783_LED_TRIODE_TC2)
-		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
-
-	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
-	if (ret)
-		goto out;
-
-	reg = (pdata->tc3_period & MC13783_LED_Cx_PERIOD_MASK) <<
-							MC13783_LED_Cx_PERIOD;
-
-	if (pdata->flags & MC13783_LED_TRIODE_TC3)
-		reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
-
-	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
-	if (ret)
-		goto out;
-
-	reg = MC13783_LED_C0_ENABLE_BIT;
-	if (pdata->flags & MC13783_LED_TRIODE_MD)
-		reg |= MC13783_LED_C0_TRIODE_MD_BIT;
-	if (pdata->flags & MC13783_LED_TRIODE_AD)
-		reg |= MC13783_LED_C0_TRIODE_AD_BIT;
-	if (pdata->flags & MC13783_LED_TRIODE_KP)
-		reg |= MC13783_LED_C0_TRIODE_KP_BIT;
-	if (pdata->flags & MC13783_LED_BOOST_EN)
-		reg |= MC13783_LED_C0_BOOST_BIT;
-
-	reg |= (pdata->abmode & MC13783_LED_C0_ABMODE_MASK) <<
-							MC13783_LED_C0_ABMODE;
-	reg |= (pdata->abref & MC13783_LED_C0_ABREF_MASK) <<
-							MC13783_LED_C0_ABREF;
-
-	ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
-
-out:
-	mc13xxx_unlock(dev);
 	return ret;
 }
 
-static int mc13783_led_probe(struct platform_device *pdev)
+static int __init mc13xxx_led_probe(struct platform_device *pdev)
 {
 	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct mc13xxx_led_platform_data *led_cur;
-	struct mc13783_led *led, *led_dat;
-	int ret, i;
-	int init_led = 0;
-
-	if (pdata == NULL) {
-		dev_err(&pdev->dev, "missing platform data\n");
+	struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent);
+	struct mc13xxx_led_devtype *devtype =
+		(struct mc13xxx_led_devtype *)pdev->id_entry->driver_data;
+	struct mc13xxx_leds *leds;
+	int i, id, num_leds, ret;
+	u32 reg, init_led = 0;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Missing platform data\n");
 		return -ENODEV;
 	}
 
-	if (pdata->num_leds < 1 || pdata->num_leds > (MC13783_LED_MAX + 1)) {
-		dev_err(&pdev->dev, "Invalid led count %d\n", pdata->num_leds);
+	num_leds = pdata->num_leds;
+
+	if ((num_leds < 1) ||
+	    (num_leds > (devtype->led_max - devtype->led_min + 1))) {
+		dev_err(&pdev->dev, "Invalid LED count %d\n", num_leds);
 		return -EINVAL;
 	}
 
-	led = devm_kzalloc(&pdev->dev, pdata->num_leds * sizeof(*led),
-				GFP_KERNEL);
-	if (led == NULL) {
-		dev_err(&pdev->dev, "failed to alloc memory\n");
+	leds = devm_kzalloc(&pdev->dev, num_leds * sizeof(struct mc13xxx_led) +
+			    sizeof(struct mc13xxx_leds), GFP_KERNEL);
+	if (!leds)
 		return -ENOMEM;
+
+	leds->devtype = devtype;
+	leds->num_leds = num_leds;
+	platform_set_drvdata(pdev, leds);
+
+	mc13xxx_lock(mcdev);
+	for (i = 0; i < devtype->num_regs; i++) {
+		reg = pdata->led_control[i];
+		WARN_ON(reg >= (1 << 24));
+		ret = mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), reg);
+		if (ret)
+			break;
 	}
+	mc13xxx_unlock(mcdev);
 
-	ret = mc13783_leds_prepare(pdev);
 	if (ret) {
-		dev_err(&pdev->dev, "unable to init led driver\n");
+		dev_err(&pdev->dev, "Unable to init LED driver\n");
 		return ret;
 	}
 
-	for (i = 0; i < pdata->num_leds; i++) {
-		led_dat = &led[i];
-		led_cur = &pdata->led[i];
+	for (i = 0; i < num_leds; i++) {
+		const char *name, *trig;
+		char max_current;
 
-		if (led_cur->id > MC13783_LED_MAX || led_cur->id < 0) {
-			dev_err(&pdev->dev, "invalid id %d\n", led_cur->id);
-			ret = -EINVAL;
-			goto err_register;
+		ret = -EINVAL;
+
+		id = pdata->led[i].id;
+		name = pdata->led[i].name;
+		trig = pdata->led[i].default_trigger;
+		max_current = pdata->led[i].max_current;
+
+		if ((id > devtype->led_max) || (id < devtype->led_min)) {
+			dev_err(&pdev->dev, "Invalid ID %i\n", id);
+			break;
 		}
 
-		if (init_led & (1 << led_cur->id)) {
-			dev_err(&pdev->dev, "led %d already initialized\n",
-					led_cur->id);
-			ret = -EINVAL;
-			goto err_register;
+		if (init_led & (1 << id)) {
+			dev_warn(&pdev->dev,
+				 "LED %i already initialized\n", id);
+			break;
 		}
 
-		init_led |= 1 << led_cur->id;
-		led_dat->cdev.name = led_cur->name;
-		led_dat->cdev.default_trigger = led_cur->default_trigger;
-		led_dat->cdev.brightness_set = mc13783_led_set;
-		led_dat->cdev.brightness = LED_OFF;
-		led_dat->id = led_cur->id;
-		led_dat->master = dev_get_drvdata(pdev->dev.parent);
+		init_led |= 1 << id;
+		leds->led[i].id = id;
+		leds->led[i].master = mcdev;
+		leds->led[i].cdev.name = name;
+		leds->led[i].cdev.default_trigger = trig;
+		leds->led[i].cdev.brightness_set = mc13xxx_led_set;
+		leds->led[i].cdev.brightness = LED_OFF;
 
-		INIT_WORK(&led_dat->work, mc13783_led_work);
+		INIT_WORK(&leds->led[i].work, mc13xxx_led_work);
 
-		ret = led_classdev_register(pdev->dev.parent, &led_dat->cdev);
+		ret = mc13xxx_led_setup(&leds->led[i], max_current);
 		if (ret) {
-			dev_err(&pdev->dev, "failed to register led %d\n",
-					led_dat->id);
-			goto err_register;
+			dev_err(&pdev->dev, "Unable to setup LED %i\n", id);
+			break;
 		}
-
-		ret = mc13783_led_setup(led_dat, led_cur->max_current);
+		ret = led_classdev_register(pdev->dev.parent,
+					    &leds->led[i].cdev);
 		if (ret) {
-			dev_err(&pdev->dev, "unable to init led %d\n",
-					led_dat->id);
-			i++;
-			goto err_register;
+			dev_err(&pdev->dev, "Failed to register LED %i\n", id);
+			break;
 		}
 	}
 
-	platform_set_drvdata(pdev, led);
-	return 0;
-
-err_register:
-	for (i = i - 1; i >= 0; i--) {
-		led_classdev_unregister(&led[i].cdev);
-		cancel_work_sync(&led[i].work);
-	}
+	if (ret)
+		while (--i >= 0) {
+			led_classdev_unregister(&leds->led[i].cdev);
+			cancel_work_sync(&leds->led[i].work);
+		}
 
 	return ret;
 }
 
-static int mc13783_led_remove(struct platform_device *pdev)
+static int mc13xxx_led_remove(struct platform_device *pdev)
 {
-	struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct mc13783_led *led = platform_get_drvdata(pdev);
-	struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
+	struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent);
+	struct mc13xxx_leds *leds = platform_get_drvdata(pdev);
 	int i;
 
-	for (i = 0; i < pdata->num_leds; i++) {
-		led_classdev_unregister(&led[i].cdev);
-		cancel_work_sync(&led[i].work);
+	for (i = 0; i < leds->num_leds; i++) {
+		led_classdev_unregister(&leds->led[i].cdev);
+		cancel_work_sync(&leds->led[i].work);
 	}
 
-	mc13xxx_lock(dev);
-
-	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
-	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
-	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
-	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
-	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
-	mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
-
-	mc13xxx_unlock(dev);
+	mc13xxx_lock(mcdev);
+	for (i = 0; i < leds->devtype->num_regs; i++)
+		mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), 0);
+	mc13xxx_unlock(mcdev);
 
 	return 0;
 }
 
-static struct platform_driver mc13783_led_driver = {
+static const struct mc13xxx_led_devtype mc13783_led_devtype = {
+	.led_min	= MC13783_LED_MD,
+	.led_max	= MC13783_LED_B3,
+	.num_regs	= 6,
+};
+
+static const struct platform_device_id mc13xxx_led_id_table[] = {
+	{ "mc13783-led", (kernel_ulong_t)&mc13783_led_devtype, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, mc13xxx_led_id_table);
+
+static struct platform_driver mc13xxx_led_driver = {
 	.driver	= {
-		.name	= "mc13783-led",
+		.name	= "mc13xxx-led",
 		.owner	= THIS_MODULE,
 	},
-	.probe		= mc13783_led_probe,
-	.remove		= mc13783_led_remove,
+	.remove		= mc13xxx_led_remove,
+	.id_table	= mc13xxx_led_id_table,
 };
+module_platform_driver_probe(mc13xxx_led_driver, mc13xxx_led_probe);
 
-module_platform_driver(mc13783_led_driver);
-
-MODULE_DESCRIPTION("LEDs driver for Freescale MC13783 PMIC");
+MODULE_DESCRIPTION("LEDs driver for Freescale MC13XXX PMIC");
 MODULE_AUTHOR("Philippe Retornaz <philippe.retornaz@epfl.ch>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:mc13783-led");
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index bf07075..ee280f1 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -78,20 +78,23 @@ struct mc13xxx_regulator_platform_data {
 	struct mc13xxx_regulator_init_data *regulators;
 };
 
+enum {
+	/* MC13783 LED IDs */
+	MC13783_LED_MD,
+	MC13783_LED_AD,
+	MC13783_LED_KP,
+	MC13783_LED_R1,
+	MC13783_LED_G1,
+	MC13783_LED_B1,
+	MC13783_LED_R2,
+	MC13783_LED_G2,
+	MC13783_LED_B2,
+	MC13783_LED_R3,
+	MC13783_LED_G3,
+	MC13783_LED_B3,
+};
+
 struct mc13xxx_led_platform_data {
-#define MC13783_LED_MD		0
-#define MC13783_LED_AD		1
-#define MC13783_LED_KP		2
-#define MC13783_LED_R1		3
-#define MC13783_LED_G1		4
-#define MC13783_LED_B1		5
-#define MC13783_LED_R2		6
-#define MC13783_LED_G2		7
-#define MC13783_LED_B2		8
-#define MC13783_LED_R3		9
-#define MC13783_LED_G3		10
-#define MC13783_LED_B3		11
-#define MC13783_LED_MAX MC13783_LED_B3
 	int id;
 	const char *name;
 	const char *default_trigger;
@@ -100,46 +103,36 @@ struct mc13xxx_led_platform_data {
 	char max_current;
 };
 
+#define MAX_LED_CONTROL_REGS	6
+
 struct mc13xxx_leds_platform_data {
-	int num_leds;
 	struct mc13xxx_led_platform_data *led;
+	int num_leds;
 
-#define MC13783_LED_TRIODE_MD	(1 << 0)
-#define MC13783_LED_TRIODE_AD	(1 << 1)
-#define MC13783_LED_TRIODE_KP	(1 << 2)
-#define MC13783_LED_BOOST_EN	(1 << 3)
-#define MC13783_LED_TC1HALF	(1 << 4)
-#define MC13783_LED_SLEWLIMTC	(1 << 5)
-#define MC13783_LED_SLEWLIMBL	(1 << 6)
-#define MC13783_LED_TRIODE_TC1	(1 << 7)
-#define MC13783_LED_TRIODE_TC2	(1 << 8)
-#define MC13783_LED_TRIODE_TC3	(1 << 9)
-	int flags;
-
-#define MC13783_LED_AB_DISABLED		0
-#define MC13783_LED_AB_MD1		1
-#define MC13783_LED_AB_MD12		2
-#define MC13783_LED_AB_MD123		3
-#define MC13783_LED_AB_MD1234		4
-#define MC13783_LED_AB_MD1234_AD1	5
-#define MC13783_LED_AB_MD1234_AD12	6
-#define MC13783_LED_AB_MD1_AD		7
-	char abmode;
-
-#define MC13783_LED_ABREF_200MV	0
-#define MC13783_LED_ABREF_400MV	1
-#define MC13783_LED_ABREF_600MV	2
-#define MC13783_LED_ABREF_800MV	3
-	char abref;
-
-#define MC13783_LED_PERIOD_10MS		0
-#define MC13783_LED_PERIOD_100MS	1
-#define MC13783_LED_PERIOD_500MS	2
-#define MC13783_LED_PERIOD_2S		3
-	char bl_period;
-	char tc1_period;
-	char tc2_period;
-	char tc3_period;
+/* LED Control 0 */
+#define MC13783_LED_C0_ENABLE		(1 << 0)
+#define MC13783_LED_C0_TRIODE_MD	(1 << 7)
+#define MC13783_LED_C0_TRIODE_AD	(1 << 8)
+#define MC13783_LED_C0_TRIODE_KP	(1 << 9)
+#define MC13783_LED_C0_BOOST		(1 << 10)
+#define MC13783_LED_C0_ABMODE(x)	(((x) & 0x7) << 11)
+#define MC13783_LED_C0_ABREF(x)		(((x) & 0x3) << 14)
+/* LED Control 1 */
+#define MC13783_LED_C1_TC1HALF		(1 << 18)
+#define MC13783_LED_C1_SLEWLIM		(1 << 23)
+/* LED Control 2 */
+#define MC13783_LED_C2_PERIOD(x)	(((x) & 0x3) << 21)
+#define MC13783_LED_C2_SLEWLIM		(1 << 23)
+/* LED Control 3 */
+#define MC13783_LED_C3_PERIOD(x)	(((x) & 0x3) << 21)
+#define MC13783_LED_C3_TRIODE_TC1	(1 << 23)
+/* LED Control 4 */
+#define MC13783_LED_C4_PERIOD(x)	(((x) & 0x3) << 21)
+#define MC13783_LED_C4_TRIODE_TC2	(1 << 23)
+/* LED Control 5 */
+#define MC13783_LED_C5_PERIOD(x)	(((x) & 0x3) << 21)
+#define MC13783_LED_C5_TRIODE_TC3	(1 << 23)
+	u32 led_control[MAX_LED_CONTROL_REGS];
 };
 
 struct mc13xxx_buttons_platform_data {
-- 
1.8.1.5

[PATCH v4 2/3] leds: leds-mc13783: Add MC13892 LED support

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 drivers/leds/Kconfig        |  6 ++---
 drivers/leds/leds-mc13783.c | 60 ++++++++++++++++++++++++++++++++++++++++++++-
 include/linux/mfd/mc13xxx.h |  7 ++++++
 3 files changed, 69 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ef99229..e43402d 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -388,12 +388,12 @@ config LEDS_DELL_NETBOOKS
 	  notebooks that have an external LED.
 
 config LEDS_MC13783
-	tristate "LED Support for MC13783 PMIC"
+	tristate "LED Support for MC13XXX PMIC"
 	depends on LEDS_CLASS
-	depends on MFD_MC13783
+	depends on MFD_MC13XXX
 	help
 	  This option enable support for on-chip LED drivers found
-	  on Freescale Semiconductor MC13783 PMIC.
+	  on Freescale Semiconductor MC13783/MC13892 PMIC.
 
 config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index 5ba954a..f656fd5 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -1,5 +1,5 @@
 /*
- * LEDs driver for Freescale MC13783
+ * LEDs driver for Freescale MC13783/MC13892
  *
  * Copyright (C) 2010 Philippe R?tornaz
  *
@@ -85,6 +85,34 @@ static void mc13xxx_led_work(struct work_struct *work)
 		value = led->new_brightness >> 3;
 		mask = 0x1f;
 		break;
+	case MC13892_LED_MD:
+		reg = MC13XXX_REG_LED_CONTROL(0);
+		shift = 3;
+		mask = 0x3f;
+		value = led->new_brightness >> 2;
+		break;
+	case MC13892_LED_AD:
+		reg = MC13XXX_REG_LED_CONTROL(0);
+		shift = 15;
+		mask = 0x3f;
+		value = led->new_brightness >> 2;
+		break;
+	case MC13892_LED_KP:
+		reg = MC13XXX_REG_LED_CONTROL(1);
+		shift = 3;
+		mask = 0x3f;
+		value = led->new_brightness >> 2;
+		break;
+	case MC13892_LED_R:
+	case MC13892_LED_G:
+	case MC13892_LED_B:
+		off = led->id - MC13892_LED_R;
+		bank = off / 2;
+		reg = MC13XXX_REG_LED_CONTROL(2) + bank;
+		shift = (off - bank * 2) * 12 + 3;
+		value = led->new_brightness >> 2;
+		mask = 0x3f;
+		break;
 	default:
 		BUG();
 	}
@@ -138,6 +166,29 @@ static int __init mc13xxx_led_setup(struct mc13xxx_led *led, int max_current)
 		shift = ((led->id - MC13783_LED_R1) - bank * 3) * 2;
 		mask = 0x03;
 		break;
+	case MC13892_LED_MD:
+		reg = MC13XXX_REG_LED_CONTROL(0);
+		shift = 9;
+		mask = 0x07;
+		break;
+	case MC13892_LED_AD:
+		reg = MC13XXX_REG_LED_CONTROL(0);
+		shift = 21;
+		mask = 0x07;
+		break;
+	case MC13892_LED_KP:
+		reg = MC13XXX_REG_LED_CONTROL(1);
+		shift = 9;
+		mask = 0x07;
+		break;
+	case MC13892_LED_R:
+	case MC13892_LED_G:
+	case MC13892_LED_B:
+		bank = (led->id - MC13892_LED_R) / 2;
+		reg = MC13XXX_REG_LED_CONTROL(2) + bank;
+		shift = ((led->id - MC13892_LED_R) - bank * 2) * 12 + 9;
+		mask = 0x07;
+		break;
 	default:
 		BUG();
 	}
@@ -276,8 +327,15 @@ static const struct mc13xxx_led_devtype mc13783_led_devtype = {
 	.num_regs	= 6,
 };
 
+static const struct mc13xxx_led_devtype mc13892_led_devtype = {
+	.led_min	= MC13892_LED_MD,
+	.led_max	= MC13892_LED_B,
+	.num_regs	= 4,
+};
+
 static const struct platform_device_id mc13xxx_led_id_table[] = {
 	{ "mc13783-led", (kernel_ulong_t)&mc13783_led_devtype, },
+	{ "mc13892-led", (kernel_ulong_t)&mc13892_led_devtype, },
 	{ }
 };
 MODULE_DEVICE_TABLE(platform, mc13xxx_led_id_table);
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index ee280f1..41ed592 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -92,6 +92,13 @@ enum {
 	MC13783_LED_R3,
 	MC13783_LED_G3,
 	MC13783_LED_B3,
+	/* MC13892 LED IDs */
+	MC13892_LED_MD,
+	MC13892_LED_AD,
+	MC13892_LED_KP,
+	MC13892_LED_R,
+	MC13892_LED_G,
+	MC13892_LED_B,
 };
 
 struct mc13xxx_led_platform_data {
-- 
1.8.1.5

[PATCH v4 3/3] leds: leds-mc13783: Add devicetree support

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 Documentation/devicetree/bindings/mfd/mc13xxx.txt | 39 +++++++++++++
 drivers/leds/leds-mc13783.c                       | 69 +++++++++++++++++++----
 2 files changed, 96 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index abd9e3c..96c7f3a 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -12,6 +12,13 @@ Optional properties:
 Sub-nodes:
 - regulators : Contain the regulator nodes. The regulators are bound using
   their names as listed below with their registers and bits for enabling.
+- leds : Contain the led nodes and initial register values in property
+  "led_control". Number of register depends of used IC, for MC13783 is 6,
+  for MC13892 is 4. See datasheet for bits definitions of these register.
+  Each led node should contain "id", which is described below, and "max_cur"
+  which selects value current depending on the led (Values should be taken
+  from IC datasheet). Optional properties "label" and "linux,default-trigger"
+  is described in Documentation/devicetree/bindings/leds/common.txt
 
 MC13783 regulators:
     sw1a      : regulator SW1A      (register 24, bit 0)
@@ -72,6 +79,28 @@ MC13892 regulators:
   The bindings details of individual regulator device can be found in:
   Documentation/devicetree/bindings/regulator/regulator.txt
 
+MC13783 LED IDs:
+    0  : Main display
+    1  : AUX display
+    2  : Keypad
+    3  : Red 1
+    4  : Green 1
+    5  : Blue 1
+    6  : Red 2
+    7  : Green 2
+    8  : Blue 2
+    9  : Red 3
+    10 : Green 3
+    11 : Blue 3
+
+MC13892 LED IDs:
+    12 : Main display
+    13 : AUX display
+    14 : Keypad
+    15 : Red
+    16 : Green
+    17 : Blue
+
 Examples:
 
 ecspi at 70010000 { /* ECSPI1 */
@@ -89,6 +118,16 @@ ecspi at 70010000 { /* ECSPI1 */
 		interrupt-parent = <&gpio0>;
 		interrupts = <8>;
 
+		leds {
+			led_control = <0x0 0x0 0x0 0x0>;
+			led_r {
+				id = <15>;
+				label = "system:red:live";
+				linux,default-trigger = "heartbeat";
+				max-cur = <6>;
+			};
+		};
+
 		regulators {
 			sw1_reg: mc13892__sw1 {
 				regulator-min-microvolt = <600000>;
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index f656fd5..65a06a8 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/of.h>
 #include <linux/workqueue.h>
 #include <linux/mfd/mc13xxx.h>
 
@@ -207,35 +208,55 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev)
 	struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent);
 	struct mc13xxx_led_devtype *devtype =
 		(struct mc13xxx_led_devtype *)pdev->id_entry->driver_data;
+	struct device_node *parent, *child = NULL;
 	struct mc13xxx_leds *leds;
-	int i, id, num_leds, ret;
-	u32 reg, init_led = 0;
+	int i, id, num_leds, ret = -EINVAL;
+	u32 reg, ctrls[MAX_LED_CONTROL_REGS], init_led = 0;
 
-	if (!pdata) {
+	of_node_get(pdev->dev.parent->of_node);
+	parent = of_find_node_by_name(pdev->dev.parent->of_node, "leds");
+	if (!parent && !pdata) {
 		dev_err(&pdev->dev, "Missing platform data\n");
 		return -ENODEV;
 	}
 
-	num_leds = pdata->num_leds;
+	if (parent)
+		num_leds = of_get_child_count(parent);
+	else
+		num_leds = pdata->num_leds;
 
 	if ((num_leds < 1) ||
 	    (num_leds > (devtype->led_max - devtype->led_min + 1))) {
 		dev_err(&pdev->dev, "Invalid LED count %d\n", num_leds);
-		return -EINVAL;
+		goto out_node_put;
 	}
 
 	leds = devm_kzalloc(&pdev->dev, num_leds * sizeof(struct mc13xxx_led) +
 			    sizeof(struct mc13xxx_leds), GFP_KERNEL);
-	if (!leds)
-		return -ENOMEM;
+	if (!leds) {
+		ret = -ENOMEM;
+		goto out_node_put;
+	}
 
 	leds->devtype = devtype;
 	leds->num_leds = num_leds;
 	platform_set_drvdata(pdev, leds);
 
+	if (parent) {
+		ret = of_property_read_u32_array(parent, "led_control", ctrls,
+						 devtype->num_regs);
+		if (ret) {
+			dev_err(&pdev->dev, "Missing led_control settings\n");
+			goto out_node_put;
+		}
+	}
+
 	mc13xxx_lock(mcdev);
 	for (i = 0; i < devtype->num_regs; i++) {
-		reg = pdata->led_control[i];
+		if (parent)
+			reg = ctrls[i];
+		else
+			reg = pdata->led_control[i];
 		WARN_ON(reg >= (1 << 24));
 		ret = mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), reg);
 		if (ret)
@@ -250,14 +271,34 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev)
 
 	for (i = 0; i < num_leds; i++) {
 		const char *name, *trig;
+		const __be32 *prop;
 		char max_current;
 
 		ret = -EINVAL;
 
-		id = pdata->led[i].id;
-		name = pdata->led[i].name;
-		trig = pdata->led[i].default_trigger;
-		max_current = pdata->led[i].max_current;
+		if (parent) {
+			child = of_get_next_child(parent, child);
+			prop = of_get_property(child, "id", NULL);
+			if (!prop) {
+				dev_err(&pdev->dev, "Missing LED ID\n");
+				break;
+			} else
+				id = be32_to_cpu(*prop);
+			name = of_get_property(child, "label", NULL);
+			trig = of_get_property(child, "linux,default-trigger",
+					       NULL);
+			prop = of_get_property(child, "max-cur", NULL);
+			if (!prop) {
+				dev_err(&pdev->dev, "Missing LED max-cur\n");
+				break;
+			} else
+				max_current = be32_to_cpu(*prop);
+		} else {
+			id = pdata->led[i].id;
+			name = pdata->led[i].name;
+			trig = pdata->led[i].default_trigger;
+			max_current = pdata->led[i].max_current;
+		}
 
 		if ((id > devtype->led_max) || (id < devtype->led_min)) {
 			dev_err(&pdev->dev, "Invalid ID %i\n", id);
@@ -299,6 +340,10 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev)
 			cancel_work_sync(&leds->led[i].work);
 		}
 
+out_node_put:
+	if (parent)
+		of_node_put(parent);
+
 	return ret;
 }
 
-- 
1.8.1.5

[PATCH v4 3/3] leds: leds-mc13783: Add devicetree support

[Bryan Wu]

On Mon, Jun 10, 2013 at 9:59 AM, Alexander Shiyan <shc_work@mail.ru> wrote:
>
I'm OK for this patchset. But I need some review from DT maintainer,
Grant and Rob could you please help to take a look.

Thanks,
-Bryan

> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
>  Documentation/devicetree/bindings/mfd/mc13xxx.txt | 39 +++++++++++++
>  drivers/leds/leds-mc13783.c                       | 69 +++++++++++++++++++----
>  2 files changed, 96 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
> index abd9e3c..96c7f3a 100644
> --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
> +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
> @@ -12,6 +12,13 @@ Optional properties:
>  Sub-nodes:
>  - regulators : Contain the regulator nodes. The regulators are bound using
>    their names as listed below with their registers and bits for enabling.
> +- leds : Contain the led nodes and initial register values in property
> +  "led_control". Number of register depends of used IC, for MC13783 is 6,
> +  for MC13892 is 4. See datasheet for bits definitions of these register.
> +  Each led node should contain "id", which is described below, and "max_cur"
> +  which selects value current depending on the led (Values should be taken
> +  from IC datasheet). Optional properties "label" and "linux,default-trigger"
> +  is described in Documentation/devicetree/bindings/leds/common.txt
>
>  MC13783 regulators:
>      sw1a      : regulator SW1A      (register 24, bit 0)
> @@ -72,6 +79,28 @@ MC13892 regulators:
>    The bindings details of individual regulator device can be found in:
>    Documentation/devicetree/bindings/regulator/regulator.txt
>
> +MC13783 LED IDs:
> +    0  : Main display
> +    1  : AUX display
> +    2  : Keypad
> +    3  : Red 1
> +    4  : Green 1
> +    5  : Blue 1
> +    6  : Red 2
> +    7  : Green 2
> +    8  : Blue 2
> +    9  : Red 3
> +    10 : Green 3
> +    11 : Blue 3
> +
> +MC13892 LED IDs:
> +    12 : Main display
> +    13 : AUX display
> +    14 : Keypad
> +    15 : Red
> +    16 : Green
> +    17 : Blue
> +
>  Examples:
>
>  ecspi at 70010000 { /* ECSPI1 */
> @@ -89,6 +118,16 @@ ecspi at 70010000 { /* ECSPI1 */
>                 interrupt-parent = <&gpio0>;
>                 interrupts = <8>;
>
> +               leds {
> +                       led_control = <0x0 0x0 0x0 0x0>;
> +                       led_r {
> +                               id = <15>;
> +                               label = "system:red:live";
> +                               linux,default-trigger = "heartbeat";
> +                               max-cur = <6>;
> +                       };
> +               };
> +
>                 regulators {
>                         sw1_reg: mc13892__sw1 {
>                                 regulator-min-microvolt = <600000>;
> diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
> index f656fd5..65a06a8 100644
> --- a/drivers/leds/leds-mc13783.c
> +++ b/drivers/leds/leds-mc13783.c
> @@ -20,6 +20,7 @@
>  #include <linux/init.h>
>  #include <linux/platform_device.h>
>  #include <linux/leds.h>
> +#include <linux/of.h>
>  #include <linux/workqueue.h>
>  #include <linux/mfd/mc13xxx.h>
>
> @@ -207,35 +208,55 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev)
>         struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent);
>         struct mc13xxx_led_devtype *devtype =
>                 (struct mc13xxx_led_devtype *)pdev->id_entry->driver_data;
> +       struct device_node *parent, *child = NULL;
>         struct mc13xxx_leds *leds;
> -       int i, id, num_leds, ret;
> -       u32 reg, init_led = 0;
> +       int i, id, num_leds, ret = -EINVAL;
> +       u32 reg, ctrls[MAX_LED_CONTROL_REGS], init_led = 0;
>
> -       if (!pdata) {
> +       of_node_get(pdev->dev.parent->of_node);
> +       parent = of_find_node_by_name(pdev->dev.parent->of_node, "leds");
> +       if (!parent && !pdata) {
>                 dev_err(&pdev->dev, "Missing platform data\n");
>                 return -ENODEV;
>         }
>
> -       num_leds = pdata->num_leds;
> +       if (parent)
> +               num_leds = of_get_child_count(parent);
> +       else
> +               num_leds = pdata->num_leds;
>
>         if ((num_leds < 1) ||
>             (num_leds > (devtype->led_max - devtype->led_min + 1))) {
>                 dev_err(&pdev->dev, "Invalid LED count %d\n", num_leds);
> -               return -EINVAL;
> +               goto out_node_put;
>         }
>
>         leds = devm_kzalloc(&pdev->dev, num_leds * sizeof(struct mc13xxx_led) +
>                             sizeof(struct mc13xxx_leds), GFP_KERNEL);
> -       if (!leds)
> -               return -ENOMEM;
> +       if (!leds) {
> +               ret = -ENOMEM;
> +               goto out_node_put;
> +       }
>
>         leds->devtype = devtype;
>         leds->num_leds = num_leds;
>         platform_set_drvdata(pdev, leds);
>
> +       if (parent) {
> +               ret = of_property_read_u32_array(parent, "led_control", ctrls,
> +                                                devtype->num_regs);
> +               if (ret) {
> +                       dev_err(&pdev->dev, "Missing led_control settings\n");
> +                       goto out_node_put;
> +               }
> +       }
> +
>         mc13xxx_lock(mcdev);
>         for (i = 0; i < devtype->num_regs; i++) {
> -               reg = pdata->led_control[i];
> +               if (parent)
> +                       reg = ctrls[i];
> +               else
> +                       reg = pdata->led_control[i];
>                 WARN_ON(reg >= (1 << 24));
>                 ret = mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), reg);
>                 if (ret)
> @@ -250,14 +271,34 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev)
>
>         for (i = 0; i < num_leds; i++) {
>                 const char *name, *trig;
> +               const __be32 *prop;
>                 char max_current;
>
>                 ret = -EINVAL;
>
> -               id = pdata->led[i].id;
> -               name = pdata->led[i].name;
> -               trig = pdata->led[i].default_trigger;
> -               max_current = pdata->led[i].max_current;
> +               if (parent) {
> +                       child = of_get_next_child(parent, child);
> +                       prop = of_get_property(child, "id", NULL);
> +                       if (!prop) {
> +                               dev_err(&pdev->dev, "Missing LED ID\n");
> +                               break;
> +                       } else
> +                               id = be32_to_cpu(*prop);
> +                       name = of_get_property(child, "label", NULL);
> +                       trig = of_get_property(child, "linux,default-trigger",
> +                                              NULL);
> +                       prop = of_get_property(child, "max-cur", NULL);
> +                       if (!prop) {
> +                               dev_err(&pdev->dev, "Missing LED max-cur\n");
> +                               break;
> +                       } else
> +                               max_current = be32_to_cpu(*prop);
> +               } else {
> +                       id = pdata->led[i].id;
> +                       name = pdata->led[i].name;
> +                       trig = pdata->led[i].default_trigger;
> +                       max_current = pdata->led[i].max_current;
> +               }
>
>                 if ((id > devtype->led_max) || (id < devtype->led_min)) {
>                         dev_err(&pdev->dev, "Invalid ID %i\n", id);
> @@ -299,6 +340,10 @@ static int __init mc13xxx_led_probe(struct platform_device *pdev)
>                         cancel_work_sync(&leds->led[i].work);
>                 }
>
> +out_node_put:
> +       if (parent)
> +               of_node_put(parent);
> +
>         return ret;
>  }
>
> --
> 1.8.1.5
>

[PATCH v4 1/3] leds: leds-mc13783: Prepare driver to support MC13892 LEDs

[Philippe Rétornaz]

Le 10/06/2013 18:59, Alexander Shiyan a ?crit :
> This patch rewrite driver code to be ready to add support for
> MC13892 LEDs and probe from devicetree.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>


The whole serie:

Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch>

On mx31moboard with an mc13783.

Thanks !

Philippe

[PATCH v4 1/3] leds: leds-mc13783: Prepare driver to support MC13892 LEDs

[Bryan Wu]

On Tue, Jun 11, 2013 at 1:12 AM, Philippe R?tornaz
<philippe.retornaz@epfl.ch> wrote:
> Le 10/06/2013 18:59, Alexander Shiyan a ?crit :
>
>> This patch rewrite driver code to be ready to add support for
>> MC13892 LEDs and probe from devicetree.
>>
>> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
>
>
>
> The whole serie:
>
> Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
>
> On mx31moboard with an mc13783.
>

Thanks for testing, did you test device tree as well? I failed to see
any DTS file adding/change in this patchset.

-Bryan

[PATCH v4 1/3] leds: leds-mc13783: Prepare driver to support MC13892 LEDs

[Philippe Rétornaz]

Le 11/06/2013 20:29, Bryan Wu a ?crit :
> On Tue, Jun 11, 2013 at 1:12 AM, Philippe R?tornaz
> <philippe.retornaz@epfl.ch> wrote:
>> Le 10/06/2013 18:59, Alexander Shiyan a ?crit :
>>
>>> This patch rewrite driver code to be ready to add support for
>>> MC13892 LEDs and probe from devicetree.
>>>
>>> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
>>
>>
>>
>> The whole serie:
>>
>> Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
>>
>> On mx31moboard with an mc13783.
>>
>
> Thanks for testing, did you test device tree as well? I failed to see
> any DTS file adding/change in this patchset.
>

No, I tested on a mx31moboard: mc13783 with an imx31, so no device tree.
But AFAIK this board was the only in-tree user of this driver.

Regards,

Philippe

[PATCH v4 1/3] leds: leds-mc13783: Prepare driver to support MC13892 LEDs

[Bryan Wu]

On Tue, Jun 11, 2013 at 11:41 PM, Philippe R?tornaz
<philippe.retornaz@epfl.ch> wrote:
> Le 11/06/2013 20:29, Bryan Wu a ?crit :
>
>> On Tue, Jun 11, 2013 at 1:12 AM, Philippe R?tornaz
>> <philippe.retornaz@epfl.ch> wrote:
>>>
>>> Le 10/06/2013 18:59, Alexander Shiyan a ?crit :
>>>
>>>> This patch rewrite driver code to be ready to add support for
>>>> MC13892 LEDs and probe from devicetree.
>>>>
>>>> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
>>>
>>>
>>>
>>>
>>> The whole serie:
>>>
>>> Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
>>>
>>> On mx31moboard with an mc13783.
>>>
>>
>> Thanks for testing, did you test device tree as well? I failed to see
>> any DTS file adding/change in this patchset.
>>
>
> No, I tested on a mx31moboard: mc13783 with an imx31, so no device tree.
> But AFAIK this board was the only in-tree user of this driver.
>

Sure, I merged these 3 patches into my tree.

Thanks,
-Bryan

Re[2]: [PATCH v4 1/3] leds: leds-mc13783: Prepare driver to support MC13892 LEDs

[Alexander Shiyan]

> On Tue, Jun 11, 2013 at 1:12 AM, Philippe R?tornaz
> <philippe.retornaz@epfl.ch> wrote:
> > Le 10/06/2013 18:59, Alexander Shiyan a ?crit :
> >
> >> This patch rewrite driver code to be ready to add support for
> >> MC13892 LEDs and probe from devicetree.
> >>
> >> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> >
> >
> >
> > The whole serie:
> >
> > Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch>
> >
> > On mx31moboard with an mc13783.
> >
> 
> Thanks for testing, did you test device tree as well? I failed to see
> any DTS file adding/change in this patchset.

DT test passed by me on the PCM-970 board (i.MX27 & MC13783).
Non-DT test passed by me on Digi CCWMX51 module (i.MX51 & MC13892).
Thanks.

---