* [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo
@ 2013-06-11 14:49 Florian Vaussard
2013-06-11 14:49 ` [PATCH 1/4] ARM: dts: OMAP3: Include IRQ header Florian Vaussard
` (4 more replies)
0 siblings, 5 replies; 7+ messages in thread
From: Florian Vaussard @ 2013-06-11 14:49 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
This series performs several updates to omap3-overo and omap3-tobi.
Patch 1 is necessary to patch 2 for the IRQ constant. The SMSC911X is
largely taken from omap3-igep.
Regards,
Florian
Florian Vaussard (4):
ARM: dts: OMAP3: Include IRQ header
ARM: dts: omap3-tobi: Add SMSC911X node
ARM: dts: omap3-tobi: Correct polarity for GPIO LED
ARM: dts: omap3-overo: Add default trigger for TWL4030 LED
arch/arm/boot/dts/omap3-overo.dtsi | 1 +
arch/arm/boot/dts/omap3-tobi.dts | 50 +++++++++++++++++++++++++++++++++++-
arch/arm/boot/dts/omap3.dtsi | 1 +
3 files changed, 51 insertions(+), 1 deletions(-)
--
1.7.5.4
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 1/4] ARM: dts: OMAP3: Include IRQ header 2013-06-11 14:49 [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard @ 2013-06-11 14:49 ` Florian Vaussard 2013-06-11 14:49 ` [PATCH 3/4] ARM: dts: omap3-tobi: Correct polarity for GPIO LED Florian Vaussard ` (3 subsequent siblings) 4 siblings, 0 replies; 7+ messages in thread From: Florian Vaussard @ 2013-06-11 14:49 UTC (permalink / raw) To: linux-arm-kernel Some nodes in OMAP3 DTS now use edge or level sensitive interrupts. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> --- arch/arm/boot/dts/omap3.dtsi | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 6d05ee0..8e1a87f 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -9,6 +9,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> #include "skeleton.dtsi" -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/4] ARM: dts: omap3-tobi: Correct polarity for GPIO LED 2013-06-11 14:49 [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard 2013-06-11 14:49 ` [PATCH 1/4] ARM: dts: OMAP3: Include IRQ header Florian Vaussard @ 2013-06-11 14:49 ` Florian Vaussard 2013-06-11 14:49 ` [PATCH 4/4] ARM: dts: omap3-overo: Add default trigger for TWL4030 LED Florian Vaussard ` (2 subsequent siblings) 4 siblings, 0 replies; 7+ messages in thread From: Florian Vaussard @ 2013-06-11 14:49 UTC (permalink / raw) To: linux-arm-kernel The LED is active low, not active high. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> --- arch/arm/boot/dts/omap3-tobi.dts | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts index dea726f..1458591 100644 --- a/arch/arm/boot/dts/omap3-tobi.dts +++ b/arch/arm/boot/dts/omap3-tobi.dts @@ -20,7 +20,7 @@ compatible = "gpio-leds"; heartbeat { label = "overo:red:gpio21"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 4/4] ARM: dts: omap3-overo: Add default trigger for TWL4030 LED 2013-06-11 14:49 [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard 2013-06-11 14:49 ` [PATCH 1/4] ARM: dts: OMAP3: Include IRQ header Florian Vaussard 2013-06-11 14:49 ` [PATCH 3/4] ARM: dts: omap3-tobi: Correct polarity for GPIO LED Florian Vaussard @ 2013-06-11 14:49 ` Florian Vaussard [not found] ` <1370962189-9689-3-git-send-email-florian.vaussard@epfl.ch> 2013-06-19 9:29 ` [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard 4 siblings, 0 replies; 7+ messages in thread From: Florian Vaussard @ 2013-06-11 14:49 UTC (permalink / raw) To: linux-arm-kernel Commit c971ff1 'leds: leds-pwm: Defer led_pwm_set() if PWM can sleep' fixed a crash when using a trigger with a pwm-led provided by an external chip. Now it is safe to add the default trigger according to board-overo.c. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> --- arch/arm/boot/dts/omap3-overo.dtsi | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index e112a42..0bcc284 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -21,6 +21,7 @@ label = "overo:blue:COM"; pwms = <&twl_pwmled 1 7812500>; max-brightness = <127>; + linux,default-trigger = "mmc0"; }; }; -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
[parent not found: <1370962189-9689-3-git-send-email-florian.vaussard@epfl.ch>]
* [PATCH 2/4] ARM: dts: omap3-tobi: Add SMSC911X node [not found] ` <1370962189-9689-3-git-send-email-florian.vaussard@epfl.ch> @ 2013-06-11 15:35 ` Javier Martinez Canillas 0 siblings, 0 replies; 7+ messages in thread From: Javier Martinez Canillas @ 2013-06-11 15:35 UTC (permalink / raw) To: linux-arm-kernel On 06/11/2013 04:49 PM, Florian Vaussard wrote: > The Tobi expansion boards embeds a SMSC LAN8700 PHY. Add the > corresponding node into the DT. The regulators are not designed > to be turned off. > > Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> > --- > arch/arm/boot/dts/omap3-tobi.dts | 48 ++++++++++++++++++++++++++++++++++++++ > 1 files changed, 48 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts > index c7eebbf..dea726f 100644 > --- a/arch/arm/boot/dts/omap3-tobi.dts > +++ b/arch/arm/boot/dts/omap3-tobi.dts > @@ -24,6 +24,54 @@ > linux,default-trigger = "heartbeat"; > }; > }; > + > + vddvario: regulator-vddvario { > + compatible = "regulator-fixed"; > + regulator-name = "vddvario"; > + regulator-always-on; > + }; > + > + vdd33a: regulator-vdd33a { > + compatible = "regulator-fixed"; > + regulator-name = "vdd33a"; > + regulator-always-on; > + }; > +}; > + > +&gpmc { > + ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ > + > + ethernet at 5,0 { > + compatible = "smsc,lan9221", "smsc,lan9115"; > + reg = <5 0 0xff>; > + bank-width = <2>; > + > + gpmc,mux-add-data; > + gpmc,cs-on-ns = <0>; > + gpmc,cs-rd-off-ns = <42>; > + gpmc,cs-wr-off-ns = <36>; > + gpmc,adv-on-ns = <6>; > + gpmc,adv-rd-off-ns = <12>; > + gpmc,adv-wr-off-ns = <12>; > + gpmc,oe-on-ns = <0>; > + gpmc,oe-off-ns = <42>; > + gpmc,we-on-ns = <0>; > + gpmc,we-off-ns = <36>; > + gpmc,rd-cycle-ns = <60>; > + gpmc,wr-cycle-ns = <54>; > + gpmc,access-ns = <36>; > + gpmc,page-burst-access-ns = <0>; > + gpmc,bus-turnaround-ns = <0>; > + gpmc,cycle2cycle-delay-ns = <0>; > + gpmc,wr-data-mux-bus-ns = <18>; > + gpmc,wr-access-ns = <42>; > + gpmc,cycle2cycle-samecsen; > + gpmc,cycle2cycle-diffcsen; > + > + interrupt-parent = <&gpio6>; > + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176*/ > + reg-io-width = <4>; > + }; > }; > > &i2c3 { > Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo 2013-06-11 14:49 [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard ` (3 preceding siblings ...) [not found] ` <1370962189-9689-3-git-send-email-florian.vaussard@epfl.ch> @ 2013-06-19 9:29 ` Florian Vaussard 2013-06-19 9:34 ` Benoit Cousson 4 siblings, 1 reply; 7+ messages in thread From: Florian Vaussard @ 2013-06-19 9:29 UTC (permalink / raw) To: linux-arm-kernel Hello Benoit, Any comments on this series? Regards, Florian On 06/11/2013 04:49 PM, Florian Vaussard wrote: > Hello, > > This series performs several updates to omap3-overo and omap3-tobi. > Patch 1 is necessary to patch 2 for the IRQ constant. The SMSC911X is > largely taken from omap3-igep. > > Regards, > > Florian > > Florian Vaussard (4): > ARM: dts: OMAP3: Include IRQ header > ARM: dts: omap3-tobi: Add SMSC911X node > ARM: dts: omap3-tobi: Correct polarity for GPIO LED > ARM: dts: omap3-overo: Add default trigger for TWL4030 LED > > arch/arm/boot/dts/omap3-overo.dtsi | 1 + > arch/arm/boot/dts/omap3-tobi.dts | 50 +++++++++++++++++++++++++++++++++++- > arch/arm/boot/dts/omap3.dtsi | 1 + > 3 files changed, 51 insertions(+), 1 deletions(-) > ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo 2013-06-19 9:29 ` [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard @ 2013-06-19 9:34 ` Benoit Cousson 0 siblings, 0 replies; 7+ messages in thread From: Benoit Cousson @ 2013-06-19 9:34 UTC (permalink / raw) To: linux-arm-kernel On 06/19/2013 04:29 AM, Florian Vaussard wrote: > Hello Benoit, > > Any comments on this series? That series looks good to me. I've just applied it. Thanks, Benoit > > Regards, > Florian > > On 06/11/2013 04:49 PM, Florian Vaussard wrote: >> Hello, >> >> This series performs several updates to omap3-overo and omap3-tobi. >> Patch 1 is necessary to patch 2 for the IRQ constant. The SMSC911X is >> largely taken from omap3-igep. >> >> Regards, >> >> Florian >> >> Florian Vaussard (4): >> ARM: dts: OMAP3: Include IRQ header >> ARM: dts: omap3-tobi: Add SMSC911X node >> ARM: dts: omap3-tobi: Correct polarity for GPIO LED >> ARM: dts: omap3-overo: Add default trigger for TWL4030 LED >> >> arch/arm/boot/dts/omap3-overo.dtsi | 1 + >> arch/arm/boot/dts/omap3-tobi.dts | 50 >> +++++++++++++++++++++++++++++++++++- >> arch/arm/boot/dts/omap3.dtsi | 1 + >> 3 files changed, 51 insertions(+), 1 deletions(-) >> ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-06-19 9:34 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-11 14:49 [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard
2013-06-11 14:49 ` [PATCH 1/4] ARM: dts: OMAP3: Include IRQ header Florian Vaussard
2013-06-11 14:49 ` [PATCH 3/4] ARM: dts: omap3-tobi: Correct polarity for GPIO LED Florian Vaussard
2013-06-11 14:49 ` [PATCH 4/4] ARM: dts: omap3-overo: Add default trigger for TWL4030 LED Florian Vaussard
[not found] ` <1370962189-9689-3-git-send-email-florian.vaussard@epfl.ch>
2013-06-11 15:35 ` [PATCH 2/4] ARM: dts: omap3-tobi: Add SMSC911X node Javier Martinez Canillas
2013-06-19 9:29 ` [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard
2013-06-19 9:34 ` Benoit Cousson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).