From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 12 Jun 2013 10:07:18 +0200 Subject: [PATCHv4 9/9] ARM: sun4i: cubieboard: Enable the i2c controllers In-Reply-To: <1371024438-16631-1-git-send-email-maxime.ripard@free-electrons.com> References: <1371024438-16631-1-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <1371024438-16631-10-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Emilio L?pez The Cubieboard makes use of the first two i2c controllers found on the Allwinner A10; i2c-0 is used internally for the PMIC, while i2c-1 is exposed on the board headers. This patch enables them in the device tree. Signed-off-by: Emilio L?pez Signed-off-by: Maxime Ripard Reviewed-by: Tomasz Figa --- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index e752b57..757c4cd 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -56,6 +56,18 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c at 01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c at 01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; }; leds { -- 1.8.3