[RFC PATCH 11/11] ARM: s3c64xx: Add support for DMA using generic amba-pl08x driver

[tomasz.figa@gmail.com (Tomasz Figa)]

This patch adds all required platform-specific data and initialization
code to support the generic amba-pl08x driver on S3C64xx SoCs.

Also some compatibility definitions are added to make the transition from
legacy API to DMA engine easier. The biggest hack here is passing const
char * pointers through DMA resource, casted to unsigned long, but this
is how Samsung DMA wrappers (used to support both s3c-dma and DMA engine
in drivers) is designed.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
 arch/arm/Kconfig                         |   1 +
 arch/arm/mach-s3c64xx/Kconfig            |   8 +-
 arch/arm/mach-s3c64xx/Makefile           |   1 +
 arch/arm/mach-s3c64xx/common.h           |   5 +
 arch/arm/mach-s3c64xx/include/mach/dma.h |  65 ++++++++
 arch/arm/mach-s3c64xx/pl080.c            | 244 +++++++++++++++++++++++++++++++
 6 files changed, 323 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-s3c64xx/pl080.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 42d6ea2..fab8f3c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -714,6 +714,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
 	select ARM_VIC
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 2057853..704c5e4 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -28,9 +28,15 @@ config CPU_S3C6410
 	help
 	  Enable S3C6410 CPU support
 
+config S3C64XX_PL080
+	bool "S3C64XX DMA using generic PL08x driver"
+	select AMBA_PL08X
+	select SAMSUNG_DMADEV
+
 config S3C64XX_DMA
-	bool "S3C64XX DMA"
+	bool "S3C64XX DMA using legacy S3C DMA API"
 	select S3C_DMA
+	depends on !S3C64XX_PL080
 
 config S3C64XX_SETUP_SDHCI
 	bool
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c91..4e3326a 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 # DMA support
 
 obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
 
 # Device support
 
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index 6cfc99b..60a667a 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void);
 static inline int s3c64xx_pm_late_initcall(void) { return 0; }
 #endif
 
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index fe1a98c..6f88965 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
+#ifdef CONFIG_S3C64XX_DMA
+
 #define S3C_DMA_CHANNELS	(16)
 
 /* see mach-s3c2410/dma.h for notes on dma channel numbers */
@@ -128,4 +130,67 @@ struct s3c2410_dma_chan {
 
 #include <plat/dma-core.h>
 
+#else
+
+#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0		S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2	S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1		S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2	S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2		S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2	S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3		S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2	S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX		S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX		S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT		S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN		S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX	S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX	S3C64XX_DMA_CHAN("i2s2_rx")
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX		S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX		S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT		S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN		S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT	S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN	S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN	S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM		S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA		S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL		S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX	S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX	S3C64XX_DMA_CHAN("sec_tx")
+
+enum dma_ch {
+	DMACH_MAX = 32
+};
+
+struct s3c2410_dma_client {
+	char	*name;
+};
+
+static inline bool samsung_dma_has_circular(void)
+{
+	return true;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+	return true;
+}
+
+#define pl330_filter pl08x_filter_id
+
+#include <linux/amba/pl08x.h>
+#include <plat/dma-ops.h>
+
+#endif
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
new file mode 100644
index 0000000..734b79f
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -0,0 +1,244 @@
+/*
+ * Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys.h"
+
+static int pl08x_get_signal(const struct pl08x_channel_data *cd)
+{
+	return cd->min_signal;
+}
+
+static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+	{
+		.bus_id = "uart0_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart0_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_tx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm0_rx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_tx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s0_rx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_tx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi0_rx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_tx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s2_rx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.periph_buses = PL08X_AHB2,
+	}
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl08x_get_signal,
+	.put_signal = pl08x_put_signal,
+	.slave_channels = s3c64xx_dma0_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0x0a141080,
+			0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+	{
+		.bus_id = "pcm1_tx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pcm1_rx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_tx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s1_rx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_tx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "spi1_rx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_out",
+		.min_signal = 6,
+		.max_signal = 6,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_in",
+		.min_signal = 7,
+		.max_signal = 7,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ac97_mic",
+		.min_signal = 8,
+		.max_signal = 8,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "pwm",
+		.min_signal = 9,
+		.max_signal = 9,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 10,
+		.max_signal = 10,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "external",
+		.min_signal = 11,
+		.max_signal = 11,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl_memcpy =
+			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl08x_get_signal,
+	.put_signal = pl08x_put_signal,
+	.slave_channels = s3c64xx_dma1_info,
+	.num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0x0a141080,
+			0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C64XX_SDMA_SEL);
+
+	if (of_have_populated_dt())
+		return 0;
+
+	amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+	amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+	return 0;
+}
+arch_initcall(s3c64xx_pl080_init);
-- 
1.8.2.1