From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Tue, 18 Jun 2013 09:51:59 +0100 Subject: [PATCH 3/3] ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() In-Reply-To: <1371545519-27119-1-git-send-email-lee.jones@linaro.org> References: <1371545519-27119-1-git-send-email-lee.jones@linaro.org> Message-ID: <1371545519-27119-4-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org mop500_snowball_ethernet_clock_enable() provided a means to enable a clock which was used for the SMSC911x Ethernet device on Snowball. It was merely a stand-in until the driver was common clk compliant. Now that it is, this can be removed for both DT and ATAGs booting. Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500.c | 11 ----------- arch/arm/mach-ux500/board-mop500.h | 1 - arch/arm/mach-ux500/cpu-db8500.c | 1 - 3 files changed, 13 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 238b237..f7a1feb 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -419,15 +419,6 @@ static void mop500_prox_deactivate(struct device *dev) } #endif -void mop500_snowball_ethernet_clock_enable(void) -{ - struct clk *clk; - - clk = clk_get_sys("fsmc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); -} - #ifdef CONFIG_ATAGS static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { @@ -644,8 +635,6 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); - mop500_snowball_ethernet_clock_enable(); - u8500_cryp1_hash1_init(parent); /* This board has full regulator constraints */ diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 6f0bfcb..d6fab16 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -105,7 +105,6 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); -void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 084f104..1472dde 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -300,7 +300,6 @@ static void __init u8500_init_machine(void) mop500_pinmaps_init(); else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - mop500_snowball_ethernet_clock_enable(); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} -- 1.8.1.2