* [PATCH] ARM: dts: Update range for vdd_arm on EXYNOS4412-origen board
@ 2013-06-19 9:58 Tushar Behera
0 siblings, 0 replies; only message in thread
From: Tushar Behera @ 2013-06-19 9:58 UTC (permalink / raw)
To: linux-arm-kernel
EXYNOS4412 cpufreq driver requires the range of vdd_arm regulator to
be from .9v to 1.35v. Since vdd_arm regulator (BUCK2 on S5M8767) has
a supported range of .6v to 1.6v, the constraints are updated to
match the requirement from cpufreq driver.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
arch/arm/boot/dts/exynos4412-origen.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 7993641..309a583 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -450,8 +450,8 @@
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
--
1.7.9.5
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2013-06-19 9:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-19 9:58 [PATCH] ARM: dts: Update range for vdd_arm on EXYNOS4412-origen board Tushar Behera
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).