From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/18] Final Samsung PWM support cleanup
Date: Fri, 21 Jun 2013 00:12:45 +0200 [thread overview]
Message-ID: <1371766383-29077-1-git-send-email-tomasz.figa@gmail.com> (raw)
Since we now have a proper Samsung PWM clocksource driver in place,
we can proceed with further cleanup of PWM timers support on Samsung SoCs.
This series attempts to achieve this goal by:
1) moving remaining Samsung platforms to the new clocksource driver
2) removing old clocksource driver
3) adding new multiplatform- and DT-aware PWM driver
4) moving all Samsung platforms to use the new PWM driver
5) removing old PWM driver
6) removing all PWM-related code that is not used anymore
Cleaning up the PWM driver is a bit tricky, because the design of current
driver makes it completely unsuitable for DT and multiplatform and would
require a heavy rework to make it usable, breaking any existing Samsung PWM
users by the way. To avoid any breakage I decided to keep the old driver,
add new one, move all platforms to it and then remove the old one.
See particular patches for more detailed descriptions.
On S3C6410-based Tiny6410 (Mini6410-compatible), after enabling pwm-beeper
and Exynos4210-based Origen board (with PWM0 attached to a scope):
Tested-by: Tomasz Figa <tomasz.figa@gmail.com>
Changes since v1:
- made sure that suspend/resume is handled correctly in both
clocksource and PWM drivers,
- fixed incorrect definition of AUTORELOAD bit for channel 4,
- fixed order of registering PWM device and calling samsung_bl_set(),
which assumes that PWM device has been already registered,
- corrected commit messages of several patches,
- addressed all the valid comments from reviewers, including cleanup
of most code originally copied from previous PWM driver,
- rebased on top of current Kgene's for-next,
- tested on Exynos4210, verifying correct PWM output with a scope.
Needs testing on other platforms as I could only compile test for them.
Tomasz Figa (18):
ARM: SAMSUNG: Unify base address definitions of timer block
ARM: SAMSUNG: Add new PWM platform device
ARM: SAMSUNG: Set PWM platform data
clocksource: samsung_pwm_timer: Cache clocksource register address
clocksource: samsung_pwm_timer: Do not use clocksource_mmio
clocksource: samsung_pwm_timer: Handle suspend/resume correctly
ARM: SAMSUNG: Move all platforms to new clocksource driver
ARM: SAMSUNG: Remove old samsung-time driver
ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
pwm: samsung: Rename to pwm-samsung-legacy
pwm: Add new pwm-samsung driver
ARM: SAMSUNG: Rework private data handling in dev-backlight
ARM: SAMSUNG: Modify board files to use new PWM platform device
pwm: Remove superseded pwm-samsung-legacy driver
ARM: SAMSUNG: Remove old PWM timer platform devices
ARM: SAMSUNG: Remove pwm-clock infrastructure
ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
ARM: SAMSUNG: Remove plat/regs-timer.h header
arch/arm/Kconfig | 1 -
arch/arm/mach-s3c24xx/Kconfig | 12 +-
arch/arm/mach-s3c24xx/clock-s3c2410.c | 1 -
arch/arm/mach-s3c24xx/clock-s3c2412.c | 1 -
arch/arm/mach-s3c24xx/clock-s3c2416.c | 2 -
arch/arm/mach-s3c24xx/clock-s3c2443.c | 2 -
arch/arm/mach-s3c24xx/common.c | 27 +
arch/arm/mach-s3c24xx/include/mach/map.h | 2 +
arch/arm/mach-s3c24xx/mach-h1940.c | 4 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 5 +-
arch/arm/mach-s3c64xx/Kconfig | 4 +-
arch/arm/mach-s3c64xx/clock.c | 2 -
arch/arm/mach-s3c64xx/common.c | 32 +-
arch/arm/mach-s3c64xx/include/mach/irqs.h | 8 -
arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
arch/arm/mach-s3c64xx/irq-pm.c | 2 -
arch/arm/mach-s3c64xx/mach-crag6410.c | 4 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 4 +-
arch/arm/mach-s3c64xx/mach-smartq.c | 4 +-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 5 +-
arch/arm/mach-s5p64x0/Kconfig | 4 +-
arch/arm/mach-s5p64x0/clock-s5p6440.c | 2 -
arch/arm/mach-s5p64x0/clock-s5p6450.c | 2 -
arch/arm/mach-s5p64x0/common.c | 27 +
arch/arm/mach-s5p64x0/include/mach/irqs.h | 2 -
arch/arm/mach-s5p64x0/include/mach/map.h | 1 +
arch/arm/mach-s5p64x0/mach-smdk6440.c | 5 +-
arch/arm/mach-s5p64x0/mach-smdk6450.c | 5 +-
arch/arm/mach-s5p64x0/pm.c | 3 -
arch/arm/mach-s5pc100/Kconfig | 2 +-
arch/arm/mach-s5pc100/clock.c | 2 -
arch/arm/mach-s5pc100/common.c | 28 +
arch/arm/mach-s5pc100/include/mach/irqs.h | 2 -
arch/arm/mach-s5pc100/include/mach/map.h | 1 +
arch/arm/mach-s5pc100/mach-smdkc100.c | 5 +-
arch/arm/mach-s5pv210/Kconfig | 2 +-
arch/arm/mach-s5pv210/clock.c | 1 -
arch/arm/mach-s5pv210/common.c | 28 +
arch/arm/mach-s5pv210/include/mach/irqs.h | 2 -
arch/arm/mach-s5pv210/include/mach/map.h | 1 +
arch/arm/mach-s5pv210/mach-smdkv210.c | 5 +-
arch/arm/mach-s5pv210/pm.c | 10 -
arch/arm/plat-samsung/Kconfig | 14 -
arch/arm/plat-samsung/Makefile | 3 -
arch/arm/plat-samsung/dev-backlight.c | 61 +-
arch/arm/plat-samsung/devs.c | 42 +-
arch/arm/plat-samsung/include/plat/clock.h | 4 -
arch/arm/plat-samsung/include/plat/devs.h | 1 +
arch/arm/plat-samsung/include/plat/irq-vic-timer.h | 13 -
arch/arm/plat-samsung/include/plat/irqs.h | 9 -
arch/arm/plat-samsung/include/plat/pwm-clock.h | 81 ---
arch/arm/plat-samsung/include/plat/pwm-core.h | 24 +
arch/arm/plat-samsung/include/plat/regs-timer.h | 124 ----
arch/arm/plat-samsung/include/plat/samsung-time.h | 23 -
arch/arm/plat-samsung/irq-vic-timer.c | 98 ---
arch/arm/plat-samsung/pwm-clock.c | 474 --------------
arch/arm/plat-samsung/s5p-irq.c | 4 -
arch/arm/plat-samsung/samsung-time.c | 394 ------------
drivers/clocksource/samsung_pwm_timer.c | 84 +--
drivers/pwm/pwm-samsung.c | 694 ++++++++++++++-------
60 files changed, 766 insertions(+), 1644 deletions(-)
delete mode 100644 arch/arm/plat-samsung/include/plat/irq-vic-timer.h
delete mode 100644 arch/arm/plat-samsung/include/plat/pwm-clock.h
create mode 100644 arch/arm/plat-samsung/include/plat/pwm-core.h
delete mode 100644 arch/arm/plat-samsung/include/plat/regs-timer.h
delete mode 100644 arch/arm/plat-samsung/irq-vic-timer.c
delete mode 100644 arch/arm/plat-samsung/pwm-clock.c
delete mode 100644 arch/arm/plat-samsung/samsung-time.c
--
1.8.2.1
next reply other threads:[~2013-06-20 22:12 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 22:12 Tomasz Figa [this message]
2013-06-20 22:12 ` [PATCH v2 01/18] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 02/18] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 03/18] ARM: SAMSUNG: Set PWM platform data Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 04/18] clocksource: samsung_pwm_timer: Cache clocksource register address Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 05/18] clocksource: samsung_pwm_timer: Do not use clocksource_mmio Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 06/18] clocksource: samsung_pwm_timer: Handle suspend/resume correctly Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 07/18] ARM: SAMSUNG: Move all platforms to new clocksource driver Tomasz Figa
2013-06-24 15:33 ` Kukjin Kim
2013-06-24 15:38 ` Tomasz Figa
2013-06-24 15:46 ` Kukjin Kim
2013-06-24 15:49 ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 08/18] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 09/18] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 10/18] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-06-22 13:09 ` [PATCH v3 " Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 11/18] pwm: Add new pwm-samsung driver Tomasz Figa
2013-06-22 13:06 ` [PATCH v3 " Tomasz Figa
2013-06-24 15:22 ` Kukjin Kim
2013-06-24 15:37 ` Tomasz Figa
2013-06-24 17:49 ` Thierry Reding
2013-06-24 18:31 ` Tomasz Figa
2013-06-24 20:13 ` Thierry Reding
2013-06-24 20:32 ` Tomasz Figa
2013-06-24 20:53 ` Thierry Reding
2013-06-24 21:17 ` Tomasz Figa
2013-06-25 10:26 ` Thierry Reding
2013-06-25 11:19 ` Tomasz Figa
2013-06-25 15:18 ` Mark Brown
2013-06-25 16:41 ` Kukjin Kim
2013-06-25 16:30 ` Kukjin Kim
2013-06-20 22:12 ` [PATCH v2 12/18] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 13/18] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 14/18] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 15/18] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 16/18] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 17/18] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 18/18] ARM: SAMSUNG: Remove " Tomasz Figa
2013-06-20 23:05 ` [PATCH v2 00/18] Final Samsung PWM support cleanup Tomasz Figa
2013-06-21 14:04 ` Arnd Bergmann
2013-06-22 13:10 ` Tomasz Figa
2013-06-22 18:01 ` Heiko Stübner
2013-06-22 18:04 ` Tomasz Figa
2013-06-24 0:14 ` Kukjin Kim
2013-06-22 19:34 ` Sylwester Nawrocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371766383-29077-1-git-send-email-tomasz.figa@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).