linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 03/18] ARM: SAMSUNG: Set PWM platform data
Date: Fri, 21 Jun 2013 00:12:48 +0200	[thread overview]
Message-ID: <1371766383-29077-4-git-send-email-tomasz.figa@gmail.com> (raw)
In-Reply-To: <1371766383-29077-1-git-send-email-tomasz.figa@gmail.com>

From: Tomasz Figa <t.figa@samsung.com>

This patch adds PWM platform data needed for legacy (non-DT) platforms
to handle SoC-specific bits of the PWM/timer block.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/mach-s3c24xx/common.c | 11 +++++++++++
 arch/arm/mach-s3c64xx/common.c | 11 +++++++++++
 arch/arm/mach-s5p64x0/common.c | 10 ++++++++++
 arch/arm/mach-s5pc100/common.c | 11 +++++++++++
 arch/arm/mach-s5pv210/common.c | 11 +++++++++++
 5 files changed, 54 insertions(+)

diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index c157103..e5e7d7d 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -49,6 +50,7 @@
 #include <plat/clock.h>
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
+#include <plat/pwm-core.h>
 
 #include "common.h"
 
@@ -216,6 +218,13 @@ static void s3c24xx_default_idle(void)
 		     S3C2410_CLKCON);
 }
 
+static struct samsung_pwm_variant s3c24xx_pwm_variant = {
+	.bits		= 16,
+	.div_base	= 1,
+	.has_tint_cstat	= false,
+	.tclk_mask	= (1 << 4),
+};
+
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
 	arm_pm_idle = s3c24xx_default_idle;
@@ -232,6 +241,8 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	s3c24xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
 }
 
 /* Serial port registrations */
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 1aed6f4..0ab97c3 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -26,6 +26,7 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/irqchip/arm-vic.h>
+#include <clocksource/samsung_pwm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,6 +43,7 @@
 #include <plat/gpio-cfg.h>
 #include <plat/irq-uart.h>
 #include <plat/irq-vic-timer.h>
+#include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
@@ -148,6 +150,13 @@ static struct device s3c64xx_dev = {
 	.bus	= &s3c64xx_subsys,
 };
 
+static struct samsung_pwm_variant s3c64xx_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
+};
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -160,6 +169,8 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	s3c64xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
 }
 
 static __init int s3c64xx_dev_init(void)
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 76d0053..c14d719 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
@@ -46,6 +47,7 @@
 #include <plat/fb-core.h>
 #include <plat/spi-core.h>
 #include <plat/gpio-cfg.h>
+#include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
@@ -156,6 +158,13 @@ static void s5p64x0_idle(void)
 	cpu_do_idle();
 }
 
+static struct samsung_pwm_variant s5p64x0_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= 0,
+};
+
 /*
  * s5p64x0_map_io
  *
@@ -175,6 +184,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 
+	samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
 }
 
 void __init s5p6440_map_io(void)
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index 5110315..a62e8a4 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 
@@ -45,6 +46,7 @@
 #include <plat/fb-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
+#include <plat/pwm-core.h>
 #include <plat/spi-core.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
@@ -131,6 +133,13 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
 	}
 };
 
+static struct samsung_pwm_variant s5pc100_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 5),
+};
+
 /*
  * s5pc100_map_io
  *
@@ -148,6 +157,8 @@ void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
 	s5p_init_cpu(S5P_VA_CHIPID);
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s5pc100_pwm_variant);
 }
 
 void __init s5pc100_map_io(void)
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 9dfe93e..4eba33d 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/device.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
@@ -42,6 +43,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/keypad-core.h>
+#include <plat/pwm-core.h>
 #include <plat/tv-core.h>
 #include <plat/spi-core.h>
 #include <plat/regs-serial.h>
@@ -148,6 +150,13 @@ void s5pv210_restart(char mode, const char *cmd)
 	__raw_writel(0x1, S5P_SWRESET);
 }
 
+static struct samsung_pwm_variant s5pv210_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 5),
+};
+
 /*
  * s5pv210_map_io
  *
@@ -165,6 +174,8 @@ void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
 	s5p_init_cpu(S5P_VA_CHIPID);
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s5pv210_pwm_variant);
 }
 
 void __init s5pv210_map_io(void)
-- 
1.8.2.1

  parent reply	other threads:[~2013-06-20 22:12 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-20 22:12 [PATCH v2 00/18] Final Samsung PWM support cleanup Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 01/18] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 02/18] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-06-20 22:12 ` Tomasz Figa [this message]
2013-06-20 22:12 ` [PATCH v2 04/18] clocksource: samsung_pwm_timer: Cache clocksource register address Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 05/18] clocksource: samsung_pwm_timer: Do not use clocksource_mmio Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 06/18] clocksource: samsung_pwm_timer: Handle suspend/resume correctly Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 07/18] ARM: SAMSUNG: Move all platforms to new clocksource driver Tomasz Figa
2013-06-24 15:33   ` Kukjin Kim
2013-06-24 15:38     ` Tomasz Figa
2013-06-24 15:46       ` Kukjin Kim
2013-06-24 15:49         ` Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 08/18] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 09/18] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 10/18] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-06-22 13:09   ` [PATCH v3 " Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 11/18] pwm: Add new pwm-samsung driver Tomasz Figa
2013-06-22 13:06   ` [PATCH v3 " Tomasz Figa
2013-06-24 15:22     ` Kukjin Kim
2013-06-24 15:37       ` Tomasz Figa
2013-06-24 17:49       ` Thierry Reding
2013-06-24 18:31         ` Tomasz Figa
2013-06-24 20:13           ` Thierry Reding
2013-06-24 20:32             ` Tomasz Figa
2013-06-24 20:53               ` Thierry Reding
2013-06-24 21:17                 ` Tomasz Figa
2013-06-25 10:26                   ` Thierry Reding
2013-06-25 11:19                     ` Tomasz Figa
2013-06-25 15:18                       ` Mark Brown
2013-06-25 16:41                       ` Kukjin Kim
2013-06-25 16:30         ` Kukjin Kim
2013-06-20 22:12 ` [PATCH v2 12/18] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 13/18] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-06-20 22:12 ` [PATCH v2 14/18] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 15/18] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 16/18] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 17/18] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Tomasz Figa
2013-06-20 22:13 ` [PATCH v2 18/18] ARM: SAMSUNG: Remove " Tomasz Figa
2013-06-20 23:05 ` [PATCH v2 00/18] Final Samsung PWM support cleanup Tomasz Figa
2013-06-21 14:04 ` Arnd Bergmann
2013-06-22 13:10   ` Tomasz Figa
2013-06-22 18:01 ` Heiko Stübner
2013-06-22 18:04   ` Tomasz Figa
2013-06-24  0:14     ` Kukjin Kim
2013-06-22 19:34   ` Sylwester Nawrocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371766383-29077-4-git-send-email-tomasz.figa@gmail.com \
    --to=tomasz.figa@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).