[PATCH v2 1/3] ARM: dts: imx6dl: add a new pinctrl for ecspi1

[PATCH v2 1/3] ARM: dts: imx6dl: add a new pinctrl for ecspi1

[Huang Shijie]

This new pinctrl is used in the imx6dl-sabresd board.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 arch/arm/boot/dts/imx6dl.dtsi |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 2b3ecd6..d961365 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -56,6 +56,14 @@
 							MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
 						>;
 					};
+
+					pinctrl_ecspi1_2: ecspi1grp-2 {
+						fsl,pins = <
+							MX6DL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+							MX6DL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+							MX6DL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+						>;
+					};
 				};
 
 				enet {
-- 
1.7.1

[PATCH v2 2/3] ARM: dts: imx6q: add a new pinctrl for ecspi1

[Huang Shijie]

This new pinctrl is used by the imx6q-sabresd board.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 arch/arm/boot/dts/imx6q.dtsi |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index ba09dc3..9a69891 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -108,6 +108,14 @@
 							MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
 						>;
 					};
+
+					pinctrl_ecspi1_2: ecspi1grp-2 {
+						fsl,pins = <
+							MX6Q_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+							MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+							MX6Q_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+						>;
+					};
 				};
 
 				ecspi3 {
-- 
1.7.1

[PATCH v2 3/3] ARM: dts: imx6qdl-sabresd: enable the SPI NOR

[Huang Shijie]

enable the spi nor for imx6q{dl}-sabresd boards.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6e5dfdb..4dec80c 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -77,6 +77,22 @@
 	status = "okay";
 };
 
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 9 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_2>;
+	status = "okay";
+
+	flash: m25p80 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
-- 
1.7.1

[PATCH v2 1/3] ARM: dts: imx6dl: add a new pinctrl for ecspi1

[Shawn Guo]

On Fri, Jun 21, 2013 at 10:19:09AM +0800, Huang Shijie wrote:
> This new pinctrl is used in the imx6dl-sabresd board.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>

Applied all 3, thanks.

Shawn

> ---
>  arch/arm/boot/dts/imx6dl.dtsi |    8 ++++++++
>  1 files changed, 8 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
> index 2b3ecd6..d961365 100644
> --- a/arch/arm/boot/dts/imx6dl.dtsi
> +++ b/arch/arm/boot/dts/imx6dl.dtsi
> @@ -56,6 +56,14 @@
>  							MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
>  						>;
>  					};
> +
> +					pinctrl_ecspi1_2: ecspi1grp-2 {
> +						fsl,pins = <
> +							MX6DL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
> +							MX6DL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
> +							MX6DL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
> +						>;
> +					};
>  				};
>  
>  				enet {
> -- 
> 1.7.1
> 
>