From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: Hook up supplies for Arndale S5M8767
Date: Mon, 1 Jul 2013 22:36:38 +0100 [thread overview]
Message-ID: <1372714599-17588-2-git-send-email-broonie@kernel.org> (raw)
In-Reply-To: <1372714599-17588-1-git-send-email-broonie@kernel.org>
From: Mark Brown <broonie@linaro.org>
As part of this add nodes for the main wall supply as well as bucks 7
and 8 which are used to drop that down for several of the LDOs.
Signed-off-by: Mark Brown <broonie@linaro.org>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 35 ++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 68a13a6..482f275 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -38,6 +38,26 @@
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
+
s5m8767,pmic-buck2-dvs-voltage = <1300000>;
s5m8767,pmic-buck3-dvs-voltage = <1100000>;
s5m8767,pmic-buck4-dvs-voltage = <1200000>;
@@ -276,6 +296,16 @@
op_mode = <1>;
};
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ };
+
buck9_reg: BUCK9 {
regulator-name = "VDD_33_OFF_EXT1";
regulator-min-microvolt = <750000>;
@@ -434,6 +464,11 @@
#address-cells = <1>;
#size-cells = <0>;
+ main_dc_reg: fixedregulator at 1 {
+ compatible = "regulator-fixed";
+ regulator-name = "MAIN_DC";
+ };
+
mmc_reg: voltage-regulator {
compatible = "regulator-fixed";
regulator-name = "VDD_33ON_2.8V";
--
1.8.3.1
next prev parent reply other threads:[~2013-07-01 21:36 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 21:36 [PATCH 1/3] ARM: dts: Put Arndale fixed voltage regulators on a simple-bus Mark Brown
2013-07-01 21:36 ` Mark Brown [this message]
2013-07-01 21:36 ` [PATCH 3/3] ARM: dts: Add WM1811A audio CODEC to Arndale bindings Mark Brown
2013-07-01 21:47 ` Fabio Estevam
2013-07-01 22:38 ` Mark Brown
2013-07-02 5:21 ` Tushar Behera
2013-07-02 9:25 ` Mark Brown
2013-07-24 1:50 ` Kukjin Kim
2013-07-05 23:36 ` [PATCH 1/3] ARM: dts: Put Arndale fixed voltage regulators on a simple-bus Tomasz Figa
2013-07-06 9:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372714599-17588-2-git-send-email-broonie@kernel.org \
--to=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).