From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 07/10] clocksource: sun4i: Factor out some timer code
Date: Fri, 5 Jul 2013 21:34:34 +0200 [thread overview]
Message-ID: <1373052877-29366-8-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1373052877-29366-1-git-send-email-maxime.ripard@free-electrons.com>
The set_next_event and set_mode callbacks share a lot of common code we
can easily factor to avoid duplication and mistakes.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clocksource/sun4i_timer.c | 48 ++++++++++++++++++++++++++-------------
1 file changed, 32 insertions(+), 16 deletions(-)
diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index 6938cf9..00e17d9 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -52,24 +52,46 @@ static void sun4i_clkevt_sync(void)
cpu_relax();
}
+static void sun4i_clkevt_time_stop(u8 timer)
+{
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+ writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
+ sun4i_clkevt_sync();
+}
+
+static void sun4i_clkevt_time_setup(u8 timer, unsigned long delay)
+{
+ writel(delay, timer_base + TIMER_INTVAL_REG(timer));
+}
+
+static void sun4i_clkevt_time_start(u8 timer, bool periodic)
+{
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+
+ if (periodic)
+ val &= ~TIMER_CTL_ONESHOT;
+ else
+ val |= TIMER_CTL_ONESHOT;
+
+ writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
+}
+
static void sun4i_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
- u32 u = readl(timer_base + TIMER_CTL_REG(0));
-
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- u &= ~(TIMER_CTL_ONESHOT);
- writel(u | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(0));
+ sun4i_clkevt_time_stop(0);
+ sun4i_clkevt_time_start(0, true);
break;
-
case CLOCK_EVT_MODE_ONESHOT:
- writel(u | TIMER_CTL_ONESHOT, timer_base + TIMER_CTL_REG(0));
+ sun4i_clkevt_time_stop(0);
+ sun4i_clkevt_time_start(0, false);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
default:
- writel(u & ~(TIMER_CTL_ENABLE), timer_base + TIMER_CTL_REG(0));
+ sun4i_clkevt_time_stop(0);
break;
}
}
@@ -77,15 +99,9 @@ static void sun4i_clkevt_mode(enum clock_event_mode mode,
static int sun4i_clkevt_next_event(unsigned long evt,
struct clock_event_device *unused)
{
- u32 val = readl(timer_base + TIMER_CTL_REG(0));
- writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(0));
- sun4i_clkevt_sync();
-
- writel(evt, timer_base + TIMER_INTVAL_REG(0));
-
- val = readl(timer_base + TIMER_CTL_REG(0));
- writel(val | TIMER_CTL_ENABLE | TIMER_CTL_AUTORELOAD,
- timer_base + TIMER_CTL_REG(0));
+ sun4i_clkevt_time_stop(0);
+ sun4i_clkevt_time_setup(0, evt);
+ sun4i_clkevt_time_start(0, false);
return 0;
}
--
1.8.3.2
next prev parent reply other threads:[~2013-07-05 19:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-05 19:34 [PATCHv3 00/10] clocksource: sunxi: Timer fixes and cleanup Maxime Ripard
2013-07-05 19:34 ` [PATCHv3 01/10] clocksource: sun4i: Use the BIT macros where possible Maxime Ripard
2013-07-05 19:34 ` [PATCHv3 02/10] clocksource: sun4i: Wrap macros arguments in parenthesis Maxime Ripard
2013-07-05 19:34 ` [PATCHv3 03/10] clocksource: sun4i: rename AUTORELOAD define to RELOAD Maxime Ripard
2013-07-05 19:34 ` [PATCHv3 04/10] clocksource: sun4i: Add clocksource and sched clock drivers Maxime Ripard
2013-07-05 19:34 ` [PATCHv3 05/10] clocksource: sun4i: Don't forget to enable the clock we use Maxime Ripard
2013-07-05 19:34 ` [PATCHv3 06/10] clocksource: sun4i: Fix the next event code Maxime Ripard
2013-07-05 19:34 ` Maxime Ripard [this message]
2013-07-05 19:34 ` [PATCHv3 08/10] clocksource: sun4i: Remove TIMER_SCAL variable Maxime Ripard
2013-07-05 20:48 ` Thomas Gleixner
2013-07-05 22:12 ` Maxime Ripard
2013-07-05 19:34 ` [PATCHv3 09/10] clocksource: sun4i: Cleanup parent clock setup Maxime Ripard
2013-07-05 19:34 ` [PATCHv3 10/10] clocksource: sun4i: Fix bug when switching from periodic to oneshot modes Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373052877-29366-8-git-send-email-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox