[PATCH] clk: fix typos

[PATCH] clk: fix typos

[Peter Meerwald]

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
---
 drivers/clk/Kconfig |  2 +-
 drivers/clk/clk.c   | 13 +++++++------
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 51380d6..cd49096 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -27,7 +27,7 @@ config COMMON_CLK_DEBUG
 	bool "DebugFS representation of clock tree"
 	select DEBUG_FS
 	---help---
-	  Creates a directory hierchy in debugfs for visualizing the clk
+	  Creates a directory hierarchy in debugfs for visualizing the clk
 	  tree structure.  Each directory contains read-only members
 	  that export information specific to that clk node: clk_rate,
 	  clk_flags, clk_prepare_count, clk_enable_count &
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 54a191c..56a00db 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -702,7 +702,7 @@ void __clk_unprepare(struct clk *clk)
 
 /**
  * clk_unprepare - undo preparation of a clock source
- * @clk: the clk being unprepare
+ * @clk: the clk being unprepared
  *
  * clk_unprepare may sleep, which differentiates it from clk_disable.  In a
  * simple case, clk_unprepare can be used instead of clk_disable to gate a clk
@@ -869,6 +869,7 @@ EXPORT_SYMBOL_GPL(clk_enable);
 /**
  * __clk_round_rate - round the given rate for a clk
  * @clk: round the rate of this clock
+ * @rate: the rate which is to be rounded
  *
  * Caller must hold prepare_lock.  Useful for clk_ops such as .set_rate
  */
@@ -956,7 +957,7 @@ static int __clk_notify(struct clk *clk, unsigned long msg,
  *
  * Walks the subtree of clks starting with clk and recalculates rates as it
  * goes.  Note that if a clk does not implement the .recalc_rate callback then
- * it is assumed that the clock will take on the rate of it's parent.
+ * it is assumed that the clock will take on the rate of its parent.
  *
  * clk_recalc_rates also propagates the POST_RATE_CHANGE notification,
  * if necessary.
@@ -1026,7 +1027,7 @@ EXPORT_SYMBOL_GPL(clk_get_rate);
  * pre-rate change notifications and returns early if no clks in the
  * subtree have subscribed to the notifications.  Note that if a clk does not
  * implement the .recalc_rate callback then it is assumed that the clock will
- * take on the rate of it's parent.
+ * take on the rate of its parent.
  *
  * Caller must hold prepare_lock.
  */
@@ -1198,7 +1199,7 @@ static void clk_change_rate(struct clk *clk)
  * outcome of clk's .round_rate implementation.  If *parent_rate is unchanged
  * after calling .round_rate then upstream parent propagation is ignored.  If
  * *parent_rate comes back with a new rate for clk's parent then we propagate
- * up to clk's parent and set it's rate.  Upward propagation will continue
+ * up to clk's parent and set its rate.  Upward propagation will continue
  * until either a clk does not support the CLK_SET_RATE_PARENT flag or
  * .round_rate stops requesting changes to clk's parent_rate.
  *
@@ -1648,7 +1649,7 @@ int __clk_init(struct device *dev, struct clk *clk)
 	 * The .init callback is not used by any of the basic clock types, but
 	 * exists for weird hardware that must perform initialization magic.
 	 * Please consider other ways of solving initialization problems before
-	 * using this callback, as it's use is discouraged.
+	 * using this callback, as its use is discouraged.
 	 */
 	if (clk->ops->init)
 		clk->ops->init(clk->hw);
@@ -1675,7 +1676,7 @@ out:
  * very large numbers of clocks that need to be statically initialized.  It is
  * a layering violation to include clk-private.h from any code which implements
  * a clock's .ops; as such any statically initialized clock data MUST be in a
- * separate C file from the logic that implements it's operations.  Returns 0
+ * separate C file from the logic that implements its operations.  Returns 0
  * on success, otherwise an error code.
  */
 struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
-- 
1.8.3.2

[PATCH] clk: fix typos

[Peter Meerwald]

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
---
 drivers/clk/Kconfig |  2 +-
 drivers/clk/clk.c   | 15 ++++++++-------
 2 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 0357ac4..1ba18f9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -27,7 +27,7 @@ config COMMON_CLK_DEBUG
 	bool "DebugFS representation of clock tree"
 	select DEBUG_FS
 	---help---
-	  Creates a directory hierchy in debugfs for visualizing the clk
+	  Creates a directory hierarchy in debugfs for visualizing the clk
 	  tree structure.  Each directory contains read-only members
 	  that export information specific to that clk node: clk_rate,
 	  clk_flags, clk_prepare_count, clk_enable_count &
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1144e8c..d6b45b6 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -702,7 +702,7 @@ void __clk_unprepare(struct clk *clk)
 
 /**
  * clk_unprepare - undo preparation of a clock source
- * @clk: the clk being unprepare
+ * @clk: the clk being unprepared
  *
  * clk_unprepare may sleep, which differentiates it from clk_disable.  In a
  * simple case, clk_unprepare can be used instead of clk_disable to gate a clk
@@ -869,6 +869,7 @@ EXPORT_SYMBOL_GPL(clk_enable);
 /**
  * __clk_round_rate - round the given rate for a clk
  * @clk: round the rate of this clock
+ * @rate: the rate which is to be rounded
  *
  * Caller must hold prepare_lock.  Useful for clk_ops such as .set_rate
  */
@@ -956,7 +957,7 @@ static int __clk_notify(struct clk *clk, unsigned long msg,
  *
  * Walks the subtree of clks starting with clk and recalculates rates as it
  * goes.  Note that if a clk does not implement the .recalc_rate callback then
- * it is assumed that the clock will take on the rate of it's parent.
+ * it is assumed that the clock will take on the rate of its parent.
  *
  * clk_recalc_rates also propagates the POST_RATE_CHANGE notification,
  * if necessary.
@@ -1026,7 +1027,7 @@ EXPORT_SYMBOL_GPL(clk_get_rate);
  * pre-rate change notifications and returns early if no clks in the
  * subtree have subscribed to the notifications.  Note that if a clk does not
  * implement the .recalc_rate callback then it is assumed that the clock will
- * take on the rate of it's parent.
+ * take on the rate of its parent.
  *
  * Caller must hold prepare_lock.
  */
@@ -1198,7 +1199,7 @@ static void clk_change_rate(struct clk *clk)
  * outcome of clk's .round_rate implementation.  If *parent_rate is unchanged
  * after calling .round_rate then upstream parent propagation is ignored.  If
  * *parent_rate comes back with a new rate for clk's parent then we propagate
- * up to clk's parent and set it's rate.  Upward propagation will continue
+ * up to clk's parent and set its rate.  Upward propagation will continue
  * until either a clk does not support the CLK_SET_RATE_PARENT flag or
  * .round_rate stops requesting changes to clk's parent_rate.
  *
@@ -1449,7 +1450,7 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
  * @clk: the mux clk whose input we are switching
  * @parent: the new input to clk
  *
- * Re-parent clk to use parent as it's new input source.  If clk has the
+ * Re-parent clk to use parent as its new input source.  If clk has the
  * CLK_SET_PARENT_GATE flag set then clk must be gated for this
  * operation to succeed.  After successfully changing clk's parent
  * clk_set_parent will update the clk topology, sysfs topology and
@@ -1650,7 +1651,7 @@ int __clk_init(struct device *dev, struct clk *clk)
 	 * The .init callback is not used by any of the basic clock types, but
 	 * exists for weird hardware that must perform initialization magic.
 	 * Please consider other ways of solving initialization problems before
-	 * using this callback, as it's use is discouraged.
+	 * using this callback, as its use is discouraged.
 	 */
 	if (clk->ops->init)
 		clk->ops->init(clk->hw);
@@ -1677,7 +1678,7 @@ out:
  * very large numbers of clocks that need to be statically initialized.  It is
  * a layering violation to include clk-private.h from any code which implements
  * a clock's .ops; as such any statically initialized clock data MUST be in a
- * separate C file from the logic that implements it's operations.  Returns 0
+ * separate C file from the logic that implements its operations.  Returns 0
  * on success, otherwise an error code.
  */
 struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
-- 
1.8.3.1

[PATCH] clk: fix typos

[Mike Turquette]

Quoting Peter Meerwald (2013-06-29 06:14:19)
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>

Thanks for the corrections Peter. Taken into clk-next.

Regards,
Mike

> ---
>  drivers/clk/Kconfig |  2 +-
>  drivers/clk/clk.c   | 15 ++++++++-------
>  2 files changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 0357ac4..1ba18f9 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -27,7 +27,7 @@ config COMMON_CLK_DEBUG
>         bool "DebugFS representation of clock tree"
>         select DEBUG_FS
>         ---help---
> -         Creates a directory hierchy in debugfs for visualizing the clk
> +         Creates a directory hierarchy in debugfs for visualizing the clk
>           tree structure.  Each directory contains read-only members
>           that export information specific to that clk node: clk_rate,
>           clk_flags, clk_prepare_count, clk_enable_count &
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 1144e8c..d6b45b6 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -702,7 +702,7 @@ void __clk_unprepare(struct clk *clk)
>  
>  /**
>   * clk_unprepare - undo preparation of a clock source
> - * @clk: the clk being unprepare
> + * @clk: the clk being unprepared
>   *
>   * clk_unprepare may sleep, which differentiates it from clk_disable.  In a
>   * simple case, clk_unprepare can be used instead of clk_disable to gate a clk
> @@ -869,6 +869,7 @@ EXPORT_SYMBOL_GPL(clk_enable);
>  /**
>   * __clk_round_rate - round the given rate for a clk
>   * @clk: round the rate of this clock
> + * @rate: the rate which is to be rounded
>   *
>   * Caller must hold prepare_lock.  Useful for clk_ops such as .set_rate
>   */
> @@ -956,7 +957,7 @@ static int __clk_notify(struct clk *clk, unsigned long msg,
>   *
>   * Walks the subtree of clks starting with clk and recalculates rates as it
>   * goes.  Note that if a clk does not implement the .recalc_rate callback then
> - * it is assumed that the clock will take on the rate of it's parent.
> + * it is assumed that the clock will take on the rate of its parent.
>   *
>   * clk_recalc_rates also propagates the POST_RATE_CHANGE notification,
>   * if necessary.
> @@ -1026,7 +1027,7 @@ EXPORT_SYMBOL_GPL(clk_get_rate);
>   * pre-rate change notifications and returns early if no clks in the
>   * subtree have subscribed to the notifications.  Note that if a clk does not
>   * implement the .recalc_rate callback then it is assumed that the clock will
> - * take on the rate of it's parent.
> + * take on the rate of its parent.
>   *
>   * Caller must hold prepare_lock.
>   */
> @@ -1198,7 +1199,7 @@ static void clk_change_rate(struct clk *clk)
>   * outcome of clk's .round_rate implementation.  If *parent_rate is unchanged
>   * after calling .round_rate then upstream parent propagation is ignored.  If
>   * *parent_rate comes back with a new rate for clk's parent then we propagate
> - * up to clk's parent and set it's rate.  Upward propagation will continue
> + * up to clk's parent and set its rate.  Upward propagation will continue
>   * until either a clk does not support the CLK_SET_RATE_PARENT flag or
>   * .round_rate stops requesting changes to clk's parent_rate.
>   *
> @@ -1449,7 +1450,7 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
>   * @clk: the mux clk whose input we are switching
>   * @parent: the new input to clk
>   *
> - * Re-parent clk to use parent as it's new input source.  If clk has the
> + * Re-parent clk to use parent as its new input source.  If clk has the
>   * CLK_SET_PARENT_GATE flag set then clk must be gated for this
>   * operation to succeed.  After successfully changing clk's parent
>   * clk_set_parent will update the clk topology, sysfs topology and
> @@ -1650,7 +1651,7 @@ int __clk_init(struct device *dev, struct clk *clk)
>          * The .init callback is not used by any of the basic clock types, but
>          * exists for weird hardware that must perform initialization magic.
>          * Please consider other ways of solving initialization problems before
> -        * using this callback, as it's use is discouraged.
> +        * using this callback, as its use is discouraged.
>          */
>         if (clk->ops->init)
>                 clk->ops->init(clk->hw);
> @@ -1677,7 +1678,7 @@ out:
>   * very large numbers of clocks that need to be statically initialized.  It is
>   * a layering violation to include clk-private.h from any code which implements
>   * a clock's .ops; as such any statically initialized clock data MUST be in a
> - * separate C file from the logic that implements it's operations.  Returns 0
> + * separate C file from the logic that implements its operations.  Returns 0
>   * on success, otherwise an error code.
>   */
>  struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
> -- 
> 1.8.3.1